2012 Peugeot iOn parking brake

.
Contents
Instrument panel 18
Indicator and warning lamps 19
Main battery state of charge indicator 26
Energy consumption / generation
indicator 27
Distance recorder 28
Trip distance recorder 28
Lighting dimmer 29
Ser vice indicator 29
Range indicator 30
Instruments and controlsFamiliarisation
Remote control key 31
Electric windows 34
Doors 35
Boot 36
Charging fl aps 37
Access
Front seats 38
Rear seats 40
Mirrors 42
Interior fi ttings 44
V
entilation 47
Heating 49
Air conditioning 49
Rear screen demist - defrost 52
Comfort
Starting - stopping the vehicle 53
Manual parking brake 54
Drive selector
55
Driving
Lighting controls 57
Automatic illumination of headlamps 59
Headlamp adjustment 59
Wiper controls 60
Courtesy lamp 61
Visibility

Familiarisation
8
Instruments and controls
1. Steering lock and ignition switch.2.
Wiper stalk. 3.
Windscreen demisting vents.
4.
Glove box.Passenger's airbag deactivation.5.
Bonnet release lever.
6.Parking brake.
7. Drive selector. 8.12 V accessory socket. 9.
Heating / air conditioning controls.10.Emergency or assistance call.11.
Hazard warning switch.12 .Centre vents. 13.Audio system.

.Familiarisation
15
Driving safely
P.
Parking.
Press the brake pedal to come out of this
position. R.Reverse. N. Neutral. D.Drive (forward).


Drive selector
55- Check that the drive selector is in position
P.P- Inser t the key in the ignition switch.
- Turn the key to position 4 (START).- Hold it in this position for a few seconds,until the " READY" lamp comes on,
accompanied by an audible signal.
- Release the key.
The switch returns automatically to
position
3 (ON) .
Starting the motor
53



- Stop the vehicle.

- Keep your foot on the brake pedal.

- Put the drive selector in position P
. P

- Apply the parking brake.

- Turn the key anti-clockwise to the LOCKposition.


Stopping the motor
53

1
Instruments and controls
21
Warning / indicator lampStateCauseAction / Observations
Ready(ready to moveoff)
On fixed,
accompanied by an
audible signal when it
comes on. The vehicle is read
y to move off andyou can press the accelerator. The illumination period corresponds to the powering-
up of the vehicle.


Parking brake
On fixed. The parking brake is applied or notproperly released. Release the parking brake to switch off the warninglamp, keeping your foot on the brake pedal.
Obser ve the safety recommendations.
For further information on the parking brake, refer to
the "Driving" section.
Main batterycharge (normal or fast)
On fixed.The main battery is on charge. On completion of the charge, the lamp goes off.
Flashin
g. The charging cable is connected to
the vehicle but the main battery is not yet charging. Check the connection of the char
ging cable.

Driving
54





Manual parking brake
Applying
)Pull the parking brake lever fully up
to immobilise your vehicle.
When parking on a slope, direct your wheels against the kerb, apply the parking brake, place the drive selector in position P and switch off the ignition.


Releasing
)
Pull the parking brake lever up gently,
press the release button then lower
the lever full
y.
When the vehicle is being driven,
i
f the parking brake is still on or hasnot been fully released, this warning
lamp comes on.

4
Driving
55
P. Park.
This position is used for star ting the vehicle.
To come out of the Pposition, you must haveyour foot on the brake. R.Reverse. N.
Neutral. D.Drive (For ward).












Drive selector


Selector positions
When you move the drive selector through thegrille to select a position, the correspondingindicator is displayed in the instrument panel.
Displays in the instrument panel

With the motor running, P
appears in the
instrument panel screen.
) Press the brake pedal to come out of position P.P)
Select for ward (D ) or reverse ( R
) gear. R)
Release the parking brake. )
Ta k e your foot off the brake pedal, the
vehicle then moves off slowly to facilitatemanoeuvring. ) Accelerate to go forwards or backwards. )"D"
or "R"
appears in the instrument panelscreen.



Moving off

Driving
56
To tow your vehicle, the drive selector must be in position N
, refer to "Practical Information".

Parking the vehicle
To stop the motor, you must select position P
. PYou must apply the parking brake to immobilise
the vehicle.
To remove the key from the ignition switch, thedrive selector must be in position P.P

Practical information
82








Charging the main battery
)Pull lever 1
, located at the bottom of the
dashboard, driver's side, to open the
access flap for the normal charging socket(right hand side of the vehicle).

Normal charging


Before connecting, check that the electrical installation you want to usemeets standards *
and is compatiblewith the current rating on the chargingcable control unit. In all cases, it is recommended that your installation be checked by a qualified electrician before use andthen on a regular basis.
There are two types of charging you can use:normal or fast.
Normal charging should be used in pre
ference;
it is done from a domestic mains power point.
Fast charging is done at a compatible fastcharging station.
) Apply the parking brake and put the driveselector in position P
. P)
Switch off all electrical consumers and turn
the ignition switch to the "LOCK"
position.



You must always use only a genuine PEUGEOT charging cable.
If the ambient temperature is lower than-25° C, charging may not be possible.
*

For example, in France the standard
is NF C 15-100.