2012 Peugeot iOn ESP

Comfort
42





Door mirrors
The mirrors can be adjusted when the ignitionswitch is in the "ON" or "ACC" position. )Move control A
to the right or to the left to
select the corresponding mirror.)Direct control B in all four directions to adjust the mirror.
When adjustment is complete, return control Ato the central position.
Adjustment


The mirrors can also be foldedmanually.
However, you must never unfold them manually, other wise the mirrors may ynot remain in place correctly whendriving.
Always use control C
to unfold them.

)
With the ignition switch in the "ON" or "ACC" position: press control Cto unfold
them .) With the ignition switch in the "LOCK"
position: press control C within
30 secondsto fold them.
Electric folding / unfolding
*


*
Depending on version.

3
Comfort
51
6. Air conditioning On / Off
Switchin
g on
) Press the "A/C"
button, the associatedindicator lamp comes on. The air conditioning does not operate when
the air flow adjustment is set to off.
Switching off
) Press the "A /C "
button again, the
associated indicator lamp goes off.
Switching off may result in some discomfor t(humidity, misting).

5. "MAX" button
The air conditioning is designed to operate effectively in all seasons,
with the windows closed.
It enables
you to:
- lower the temperature, in summer,
- increase the effectiveness of the demistin
gin winter, above 3 °C.

This button allows the passenger compartment
to be quickly heated or cooled. It only works
when the air flow control is not in the "OFF"position.
Press this button. The correspondin
g
indicator lamp comes on.

The place the temperature control in the
desired position:


- on "●" for maximum ventilation,

- between "●" and "H" for maximum heating,

- between "C" and "●" for maximum air conditioning.
To obtain cool air sooner, you can useair recirculation for a few moments.
Then return to the intake of exterior air.

4
Driving
55
P. Park.
This position is used for star ting the vehicle.
To come out of the Pposition, you must haveyour foot on the brake. R.Reverse. N.
Neutral. D.Drive (For ward).












Drive selector


Selector positions
When you move the drive selector through thegrille to select a position, the correspondingindicator is displayed in the instrument panel.
Displays in the instrument panel

With the motor running, P
appears in the
instrument panel screen.
) Press the brake pedal to come out of position P.P)
Select for ward (D ) or reverse ( R
) gear. R)
Release the parking brake. )
Ta k e your foot off the brake pedal, the
vehicle then moves off slowly to facilitatemanoeuvring. ) Accelerate to go forwards or backwards. )"D"
or "R"
appears in the instrument panelscreen.



Moving off

5
Visibility
57





Lighting controls


Main lighting

The various front and rear lamps of the vehicle
are designed to adapt the lighting progressivelyin relation to the climatic conditions and so ensure the best visibility for the driver:


- sidelamps, to be seen,

- dipped beam headlamps to see without
dazzling other drivers,

- main beam headlamps to see clearl
y when
the road is clear.



Additional lighting
Other lamps are provided to fulfil the
requirements of particular driving conditions:


- a rear foglamp to be seen from a distance,

- front foglamps for even better visibility,

- daytime running lamps to be seen during
the day.
Selection ring for main lighting mode
Turn the ring to position the symbol required
facing the mark.


Automatic illumination of headlamps.
Sidelamps only.

Di
pped or main beam headlamps.


Stalk for switching headlamp beam

Pull the stalk to switch the lighting between
dipped / main beam headlamps.

In the li
ghting off and sidelamps modes, the driver can switch on the main beam headlamps
temporaril
y ("headlamp flash") by maintaining apull on the stalk.


Displays

Illumination of the corresponding indicator lamp
in the instrument panel confirms the lighting switched on.

Li
ghting off.

Safety
74
Anti-slip regulation (ASR)
and electronic stability
programme (ESP)














Trajectory control systems



Deactivation

In exceptional conditions (starting a vehicle
which is bogged down, stuck in snow, on soft ground, ...), it may be advisable to deactivate
the ASR and ESP systems, so that the wheels can move freely and regain grip. ) Press this button button, located on
the dashboard (driver's side), until the corresponding symbol appears in the
instrument panel screen.
Activation
These systems are activated automatically each time the vehicle is started.
They come into operation in the event of a grip
or trajectory problem.
The displa
y of this symbol indicates
that the ASR and ESP systems are deactivated.

Reactivation
These systems are not reactivated automatically. )Press this button again to reactivate them manually.
The symbol going off in the instrument panel
indicates the reactivation of the ASR andESP systems.
The anti-slip regulation (also known as Traction Control) optimises traction to prevent skidding
of the wheels, by acting on the brakes of the
driving wheels and on the engine.
The electronic stability programme acts on the
brake of one or more wheels and on the engine
to keep the vehicle on the trajectory requiredby the driver, within the limits of the laws of physics.
This is indicated b
y flashing of this
warning lamp in the instrument panel.

The ASR/ESP systems offer exceptional safety in normal driving, but this should not encourage the driver to take extra risks or drive at high speed.
The correct functioning of thesesystems depends on obser vation of the manufacturer's recommendations regardingthe wheels (tyres and rims), the brakingcomponents, the electronic componentsand the assembly and repair proceduresused by the PEUGEOT dealer network.
After an impact, have these systemschecked by a PEUGEOT dealer or a qualified workshop.


Operating fault
The display of this message in the instrument panel indicates a malfunction of
these systems.
Contact a PEUGEOT dealer or a qualified
workshop to have the ASR/ESP systems checked.

Safety
80
Lateral airbags
Deployment
The lateral airbags are deployed unilaterally in
the event of a serious side impact applied to all
or par t of the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside
towards the inside of the vehicle.
The lateral airbag inflates between the hip andshoulder of the front occupant of the vehicle and the corresponding door trim panel.
System which protects the driver and frontpassenger in the event of a serious side impact
in order to limit the risk of injury to the chest,
between the hip and the shoulder.
Each lateral airba
g is fitted in the seat backrest frame, door side.

Impact detection zones
A.
Front impact zone.
B. Side impact zone.


Curtain airbags
System which protects the driver and
passengers in the event of a serious side
impact in order to limit the risk of injury to the
head.
Each curtain airbag is fitted in the pillars
and the upper section of the passenger compartment.
In the event of a minor impact or bump on the side of the vehicle or if the vehicle rolls over, the airbag may not be triggered.
In the event of a rear or front collision, the airbag is not triggered.


Deployment

Each curtain airbag is deployed at the same
time as the corresponding lateral airbag in the event of a serious side impact applied to all or par t of the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside
towards the inside of the vehicle.
The cur tain airbag inflates between the front or
rear occupant of the vehicle and the windows.
I
f this warning lamp comes on in
the instrument panel, contact a
PEUGEOT dealer or a qualified workshop to have the systemchecked. The airbags may no longer be deployed in the event of a seriousimpact.



Operating fault

8
Practical information
107











Changing a fuse
the fusebox cover in the dashboard (left handside).
For access: )Unclip the cover and remove it completely by pulling it towards you.)Remove the tweezer.



Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified. ) Check that the ignition switch is in the "LOCK" position. )
Identify the faulty fuse by checking thecondition of its filament.
Changing a fuse
Good Failed
)
Use the special tweezer to extract the fuse from its location.)
Always replace the faulty fuse with a fuse
of the same rating. ) Check that the number etched on the box,
the rating etched on the top and the tablesbelow all agree.
PEUGEOT will not accept responsibilityfor the cost incurred in repairing your vehicle or for rectifying the malfunctionsresulting from the installation of accessories not supplied and not recommended by PEUGEOT andnot installed in accordance with itsinstructions, in par ticular when the consumption of all of the additional equipment connected exceeds 10 milliamperes.

Your vehicle's electrical system isdesigned to operate with standard or optional equipment.
Before installing other electrical equipment or accessories in your vehicle, contact a PEUGEOT dealer or a qualified workshop.

8
Practical information
111

Access to the fuses
)Open the bonnet (refer to the "Checks" section),)Unclip the cover and remove it completely
by pulling towards you. )Change the fuse (refer to the corresponding paragraph).)When you have finished, close the cover carefully to ensure sealing of the fusebox.
Fuse N°RatingFunctions
1110 A On-board charger.
12 10 A
Dir
ection indicator.
1
310 A Horn.
1410 A Daytime running lamps.
1515 A
Battery fan.
1610 A
Air conditioning compressor.
1720 A Right hand dipped beam.
1820 A
Left hand dipped beam, headlamp adjusters.
1
910 A
Right hand main beam.
20 10 A
Left hand main beam.