2012 Peugeot iOn Owner's Manual

8
Practical information
103
Changing dipped beam headlamp bulbs
)Turn the bulb holder to the left and pull it out. )Remove the bulb by pressing on the
tongue.)Change the bulb.
To r efit, carry out these operations in reverse order.








Changing front foglamp bulbs / daytime running lamp bulbs
)
Put the front wheels onto full lock, to facilitate access.)
Remove the clips securing the protective covers on the bulb holders.)
Move the cover aside.
)
Turn the bulb holder ( Afor the front fog
lamp, B for the daytime running lamp) to
the left and pull it out.
) Pull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.

Practical information
104
1.Brake lamps / Sidelamps (21 W / 15 W or LEDs).2. Direction indicators (W Y21W - 21 W).3.Reversing lamps (W21W - 21 W).
Rear lamps
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specification and colour.
In some weather conditions (e.g. lowtemperature or humidity), the presenceof misting on the internal sur face of the glass of the headlamps and rear lamps is normal; it disappears after the lampshave been on for a few minutes.
Changing integrated directionindicator side repeater bulbs (WY5W - 5 W)
)Push the repeater towards the rear anddisengage it.)Turn the bulb holder to the left and pull itout.)Pull the bulb out and change it.
To reassemble, carry out these operations inreverse order.

Access to bulbs
)Remove the two screws. )Disengage the lamp unit by pulling it
towards you.

8
Practical information
105
Changing a direction indicator bulb


Changing brake lamp / sidelampLEDs
All work on the LED lamps must be carried out
by a PEUGEOT dealer or qualified workshop.

Changing a reversing lamp bulb
Changing brake lamp / sidelamp
bulbs (21 W / 15 W)
)Turn the bulb holder to the left and pull it out.)Pull out the bulb and change it.
To r e f i t , c a r ry out these operations in reverseorder.
)
Turn the bulb holder to the left and pull it out. )
Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverse order.
) Turn the bulb holder to the left and pull it out.)
Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverseorder.

Practical information
106
Changing a foglamp bulb (W21W - 21W)
)Remove the cover.)Turn the bulb holder to the left and pull itout.)Pull the bulb out and change it.
To r e f i t , c a r r
y out these operations in reverse order.






Third brake lamp (W5W - 5W)
)
Remove the two screws. )
Pull out the bulb-holder. )
Pull out the bulb and change it.
To r efit, carry out these operations in reverseorder.








Changing number plate lamp
bulbs (W5W - 5W)
)Push the cover inwards.)Turn the bulb holder and pull it out.)Remove the bulb and change it.
To r efit, carry out these operations in reverse order.

8
Practical information
107











Changing a fuse
the fusebox cover in the dashboard (left handside).
For access: )Unclip the cover and remove it completely by pulling it towards you.)Remove the tweezer.



Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified. ) Check that the ignition switch is in the "LOCK" position. )
Identify the faulty fuse by checking thecondition of its filament.
Changing a fuse
Good Failed
)
Use the special tweezer to extract the fuse from its location.)
Always replace the faulty fuse with a fuse
of the same rating. ) Check that the number etched on the box,
the rating etched on the top and the tablesbelow all agree.
PEUGEOT will not accept responsibilityfor the cost incurred in repairing your vehicle or for rectifying the malfunctionsresulting from the installation of accessories not supplied and not recommended by PEUGEOT andnot installed in accordance with itsinstructions, in par ticular when the consumption of all of the additional equipment connected exceeds 10 milliamperes.

Your vehicle's electrical system isdesigned to operate with standard or optional equipment.
Before installing other electrical equipment or accessories in your vehicle, contact a PEUGEOT dealer or a qualified workshop.

Practical information
108
Dashboard fuses
The fusebox is placed in the lower dashboard (left-hand side).
Fuse N°RatingFunctions
17. 5 A
Left hand front and rear sidelamps.
215 A
Accessory socket
3- Not used
47. 5 A Starter motor.
520
A Audio system
6
- Not used.
77.5 A
Vehicle equipment, right hand
front and rear sidelamps.
87. 5 A Electric door mirrors
97.5 A
Supervisory controller.
107.5 A
Air conditioning.
1110 A
Rear foglamp
1215 A Door locking.
13 10 A
Courtes
y lamp.

8
Practical information
109
Fuse N°RatingFunctions
14 15 A
Rear wiper.
157. 5 A
Instrument panel.
167. 5 A Heating.
1720 A Heated seat.
18 10 A Option.
1
97. 5 A Door mirror heating.
2020 A
Windscreen wiper
217. 5 A Airbags
2230 A
Heated rear screen.
23
30 A Heating.
2
4- Non used.
2510 A Radio.
2
615 A
Passenger compar tment fuse.


Access to the fuses
See "Access to tools".

Practical information
110
Fuse N°RatingFunctions
1- Not used.
230 A
Internal fuse.
340 A Electric motor.
440 A
Radiator fan.
5
40 A Electric windows.
6
30 A
Vacuum pump.
715 A
Main battery ECU.
815 A Third brake lamp.
915 A
Front foglamps.
1015 A
Water pump.
Front compartment fuses
The fusebox is placed in the front compar tment
under the heating system reservoir. Only these
fuses can be replaced.

The replacement of fuses for other units (vacuum pump and battery accessories) requires the involvement of a PEUGEOT dealer or a qualifiedworkshop.