
Comfort
52
Switch off the demisting/defrostingof the rear screen and door mirrorsas soon as appropriate, so as to limit electrical consumption and optimise the range of the vehicle.
Front Demist -
Defrost
Rear screen demist - defrost
The control button is located on the dashboard, to the right of the steering wheel.
FPress this button to demist/defrost
the rear screen and (dependingon version) the door mirrors. The
indicator lamp associated with thebutton comes on. Pl
ace the air distribution control in
this position.
Switching on
Switchin
g off
The demisting/defrosting switches off
automatically to prevent an excessive electric consumption.FIt is possible to stop the demisting/
defrosting operation before it is switched
off automatically by pressing the button again. The indicator lamp associated withthe button goes off.
For rapid demisting - defrosting, you can also press the "MAX
" button. The intake of exterior air is selected
(indicator
lamp off) and depending on equipment, the air conditioning starts running (indicator lamp on).
Place the temperature control
between "●" and "H".
Pl
ace the air flow control
in the desired position. Front demisting-de
frosting can be used as soon as the "Ready" lamp is on.
Rear screen demistin
g/defrosting can onlyoperate when the "Ready" lamp is on.

7
Safety
71
Direction
indicators
Selection of the left or right direction indicators
to signal a change of direction of the vehicle. FLeft: lower the lighting stalk beyond the point of resistance.FRight: raise the lighting stalk beyond thepoint of resistance.
Hazard warning lamps
A visual warning by means of the directionindicators to alert other road users to a vehiclebreakdown, towing or accident.F
Press this button, the direction indicators flash.
They can operate with the ignition off.
Horn
Audible warning system to aler t other road
users to an imminent danger. F Press the central part of the steeringwheel.
Use the horn moderately and only in thefollowing circumstances:
- immediate danger,
- approaching a location lackingvisibility.

Safety
74
Anti-slip regulation (ASR)
and electronic stability
programme (ESP)
Trajectory control systems
Deactivation
In exceptional conditions (starting a vehicle
which is bogged down, stuck in snow, on soft ground, ...), it may be advisable to deactivate
the ASR and ESP systems, so that the wheels can move freely and regain grip. F Press this button button, located on the
dashboard to the right of the steeringwheel, until the corresponding symbol
appears in the instrument panel screen.
Activation
These systems are activated automatically each time the vehicle is started.
They come into operation in the event of a grip
or trajectory problem.
The displa
y of this symbol indicates
that the ASR and ESP systems are deactivated.
Reactivation
These systems are not reactivated automatically. FPress this button again to reactivate themmanually.
The symbol going off in the instrument panel
indicates the reactivation of the ASR and ESPsystems.
The anti-slip regulation (also known as Traction Control) optimises traction to prevent skidding
of the wheels, by acting on the brakes of the
driving wheels and on the engine.
The electronic stability programme acts on the
brake of one or more wheels and on the engine
to keep the vehicle on the trajectory requiredby the driver, within the limits of the laws of physics.
This is indicated b
y flashing of this
warning lamp in the instrument panel.
The ASR/ESP systems offer exceptional safety in normal driving, butthis should not encourage the driver to take extra risks or drive at high speed.
The correct functioning of these systems depends on obser vation of the manufacturer's recommendations regarding the wheels (tyres and rims),the braking components, the electronic components and the assembly and repair procedures used by thePEUGEOT dealer network.
After an impact, have these systems checked by a PEUGEOT dealer or aqualified workshop.
Operating fault
The display of this message in the instrument panel indicates a malfunction of
these systems.
Contact a PEUGEOT dealer or a qualified
workshop to have the ASR/ESP systems checked.

Safety
78
Airbags
The airbags have been designed to maximise
the safety of the occupants in the event of
violent collisions. They supplement the action
of the force-limiting seat belts. In this case, the electronic detectors record and analyse the front and side impacts suffered in
the impact detection zones:
- in the event of a serious impact, the airbags are deployed instantaneously and protect
the occupants of the vehicle; immediately after the impact, the airbags deflate rapidlyso that they do not hinder the visibility of
the occupants or their possible exit from
t
he vehicle,
- in the event of a minor impact or rear impact and in cer tain roll-over conditions,
the airbags will not be deployed; the seat
belt alone is su
fficient to provide maximum protection in these situations.
The airbags do not operate when the ignition is off.
This equipment only operates once. If a
second impact occurs (during the sameor a subsequent accident), the airbagwill not operate.
The deployment of one or more airbags is accompanied by a slight discharge of harmless smoke and a noise, due to theactivation of the pyrotechnic cartridgeincorporated in the system.This smoke is not harmful, but sensitiveindividuals may experience some irritation.
The noise of the detonation may result in a slight loss of hearing for a shorttime.
Impact detection zones
A.
Front impact zone. B.
Side impact zone.
Front airbags
Deployment
The airbags are deployed simultaneously,
unless the passenger's front airbag is
deactivated, in the event of a serious front
impact applied to all or par t of the front impact
z
one A , in the longitudinal centreline of the
vehicle on a horizontal plane and directed from
th
e front to the rear of the vehicle.
The front airbag inflates between the front
occupant of the vehicle and the dashboard to
cushion their forward movement. S
ystem which protects the head and chest of
the driver and front passenger in the event of a front impact.
The driver's airbag is fitted in the centre of the steering wheel; the front passenger's airbag isfitted in the dashboard above the glove box.

7
Safety
81
Sit in a normal upright position. Wear a correctly adjusted seat belt.
Do not leave anything between theoccupants and the airbags (a child, pet, object...). This could hamper the operation of the airbags or injure the occupants. After an accident or if the vehicle has beenstolen or broken into, have the airbagsystems checked. All work on the airbag system must be carried out by a PEUGEOT dealer or a qualified workshop.
Even if all of the precautions mentionedare obser ved, a risk of injury or of minor burns to the head, chest or arms when an airbag is deployed cannot be ruled out. Thebag inflates almost instantly (within a fewmilliseconds) then deflates within the same
time discharging the hot gas via openings provided for this purpose.
Lateral airbags
Use only approved covers on the seats, compatible with the deployment the lateralairbags. For information on the range of seatcovers suitable for your vehicle, you can contact a PEUGEOT dealer (see "Practical information - § Accessories"). Do not fix or attach anything to the seatbacks (clothing...). This could cause injuryto the chest or arms if the lateral airbag isdeployed.Do not sit with the upper par t of the body anynearer to the door than necessary.
Front airbags
Do not drive holding the steering wheel by itsspokes or resting your hands on the centre part of the wheel.
Passengers must not place their feet on thedashboard.
If possible, do not smoke as deployment of the airbags can cause burns or the risk of injury from a cigarette or pipe.
Never remove or pierce the steering wheel or hit it violently.
Curtain airbags
Do not fix or attach anything to the roof. This could cause injury to the head if the cur tain airbag is deployed.If fitted on your vehicle, do not remove thegrab handles installed on the roof, they play a part in securing the cur tain airbags.
For the airbags to be fully effective, observe the following safety rules:

8
Practical information
93
1.12 V compressor with integral pressure gauge, to measure and adjust the tyre
pressure.
Composition of the kit
2.Sealant car tridge for the temporary repair
of a tyre.3.Injection pipe. 4.Suction pipe, to remove the sealant product
if necessary.
5.Sachet containing a replacement valve core, a tool for removing/refitting the valve core and a speed restriction sticker.
The speed restriction sticker must beaffixed to the vehicle's steering wheelto remind you that a wheel is in temporary use.
Do not exceed a speed of 50 mph (80 km/h) when driving with a tyre repaired using this type of kit.
Refi tting the rear seat cushion
FPut the metal cover back into place. FRefit the four "butterfly" screws.FInsert the metal hooks into the seat backrest. FFold the seat cushion down until it locks in place.
When refitting the cushion, take care not to trap the seat belt buckles.

Practical information
94
Repair procedure
1. Sealing
FSwitch off the ignition.FIndicate on the speed restriction sticker provided, the wheel to be repaired, then fix it to the steering wheel as a reminder that a
wheel is in temporary use. FShake the sealant car tridge, remove the cap and screw on the injection pipe.
F Remove the valve cap for the tyre to be
repaired.F Remove the valve core using the tool
provided, and store in in a clean place.
F Connect the injection pipe to the valve of
the tyre to be repaired.
FTap the sealant car tridge (top down)several times with your hand, so as to injectall of the product into the tyre. FRemove the injection pipe.FRefit the valve core and tighten it using the
tool provided.
Take care, this product is harmful (e.g. ethylene-glycol, colophony...) if swallowed andcauses irritation to the eyes.Keep it out of reach of children. The use-by date of the sealant is marked on the car tridge.
After use, do not discard the empty cartridge but take it to a PEUGEOT dealer (France) or
an authorised waste disposal site. Don't forget to obtain a replacement cartridge; they are available from a PEUGEOT dealer or a qualified workshop.
Avoid removing any foreign bodieswhich have penetrated into the tyre.