2012 Peugeot 508 RXH Spare

24
Hybrid system
The electronic power super visor - 4automatically manages the operation of the two power units(Diesel and electric) to provide the lowest consumption.
An inver ter and a transformer are needed to manage the electric power.
The inver ter acts on the torque of the electric motor, by regulating the current coming from the high
voltage battery pack. Its operating range is between 150 and 270 volts.
The trans
former conver ts the 200 V of the battery pack to 12 V, to power the vehicle's ancillary
systems.
Th
e Stop & Star t system - 5
allows the Diesel engine to be put into standby during stops (traffic
lights, a stop, or in a traffic jam, for example) or during phases of running in all-electric mode.
The stopping and restar ting of the Diesel engine is done in a way that is instantaneous and
transparent for the driver.
Th
e electronicgearbox - 6provides, in automatic mode, significant savings in fuel consumption compared to a conventional manual gearbox, thanks to its electronic control system.
It also offers improved driving pleasure with the possibility at any time of choosing the gear changing mode: automatic or manual, using the paddles located behind the steering wheel.

186
Practical information










Changing a wheel Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
The tools are located in the boot, behind the
rear seats.
Access to the tools

List of tools *
3."Bolt cover" tool.
For removing the bolt protectors
(covers)
on alloy wheels.4. Socket for the security bolts (located in the glove box).
For adapting the wheelbrace to the special
"security" bolts.
5. One wheel chock for immobilising the
vehicle.
6.Towing eye.
See "Towing the vehicle".



Before doing any work on your vehicle, switch off the ignition (Readylamp off) to avoid any risk of injury resulting from automatic operation of the engine.
When using lifting equipment (a jackfor example), take care to use the
jacking points provided, so as to avoiddamaging the high voltage cables.
All o
f these tools are specific to your vehicle andcan vary according to the level of equipment. Do not use them for other purposes.
1.Wheelbrace.
For removing the wheel trim and removing
the wheel bolts.
2. Jack with integral handle.
For raising the vehicle.

*
Dependin
g on country of sale.

188
Practical information
)Place the jack 2 in contact with one of the
two front A or rear Blocations provided on
the underbody, whichever is closest to the
wheel to be changed.

)Raise the vehicle until there is sufficientspace between the wheel and the ground
to admit the spare (not punctured) wheel easily.)Remove the bolts and store them in a clean place.
)Remove the wheel.
) Extend the jack 2
until its base plate is incontact with the ground. Ensure that the centreline of the jack base plate is directlybelow the location Aor B
used.

8
189
Practical information

Fitting a wheel
After changing a wheel
To store the punctured wheel in the boot correctly, first remove the central cover. Have the tightening of the bolts and thepressure of the spare wheel checked
by a PEUGEOT dealer or a qualified workshop without delay. Have the punctured wheel repaired and refitted to the vehicle as soon as possible.


List of operations
)
Put the wheel in place on the hub. )
Screw in the bolts fully by hand.)
Pre-tighten the security bolt using the
wheelbrace 1fitted with the security socket 4.4) Pre-tighten the other bolts using the
wh
eelbrace 1only.

214
Practical information
The fitting of electrical equipmentor accessories which are notrecommended by PEUGEOT may result in a failure of your vehicle's electronic system and excessive electrical consumption.Please note this precaution. Youare advised to contact a PEUGEOTrepresentative to be shown the rangeof recommended equipment andaccessories.



Installation of radio communication transmitters

Before installing any after-market radiocommunication transmitter, you can contact a PEUGEOT dealer for thespecification of transmitters which can be fitted (frequency, maximum power, aerial position, specific installation
requirements), in line with the Vehicle Electromagnetic Compatibility Directive (2004/10 4/EC).
Depending on the legislation in force in the country, it may be compulsoryto have a high visibility safety vest,warning triangle and spare bulbs andfuses available in the vehicle.
You can also obtain products
for cleaning and
maintenance (exterior and interior) and toppingup fluids (screenwash, ...), as well as refills(cartridge for temporary tyre repair kit...) fromPEUGEOT dealers.

"Multimedia":
audio systems, portable navigation system,
Ta k a r a / S o ny por table video screen, Bluetooth system, speakers, DVD player, Wi-Fi, drivingaids, video suppor t, microwave unit...

9
217
Checks
On vehicle fitted with HDi engines, the fuel system must be primed if you run out of fuel;
refer to the corresponding engine compar tment
view.











Running out of fuel (Diesel)


If the tank on your vehicle is fitted witha misfuel prevention device, refer to the"Misfuel prevention (Diesel)" section.
)
Fill the fuel tank with at least five litres of Diesel. )
Open the bonnet.)
If necessary, unclip the style cover for
access to the priming pump.) Slacken the bleed screw. )
Squeeze and release the priming pumprepeatedly until fuel appears in the
transparent pipe.) Tighten the bleed screw. )
Operate the star ter until the engine starts(if the engine fails to star t at the first
attempt, wait around 15 seconds before
tr
ying again). ) If the engine fails to star t after a few
attempts, operate the priming pump again,
then the starter. ) Put the style cover back in position and clip it in place, ensuring that it has clipped correctly. )
Close the bonnet.
2 litre HDi engine


If the engine does not star t first time, don't keep trying. Star t the procedure again from the beginning.







Before doing anything under the bonnet,switch off the ignition (Ready
lamp off) to avoid any risk of injury resulting fromautomatic operation of the engine.

10
229
Technical data























Identifi cation markings
Various visible markings for the identification and tracing of your vehicle.
A.Vehicle Identification Number (VIN) under the bonnet.
This number is engraved on the bodyworknear the damper suppor t.


The tyre pressures must be checked when the tyres are cold, at least oncea month.


Low tyre pressures increase fuelconsumption.

B.Vehicle identification Number (VIN) on
the windscreen lower crossmember. This number is indicated on a self-adhesive label which is visible through the
windscreen.
C.Manufacturer's label.The VIN is indicated on a self-destroying
label affixed to the door aper ture, on the driver's side.
D.Tyre/paint label.This label is fitted to the middle pillar, on
the driver's side. It bears the
following information:


- the tyre inflation pressures with and without
load,

- the tyre sizes,

- the brands o
f tyre recommended by themanufacturer,

- the inflation pressure of the spare wheel,

- the paint colour code.

The use of snow chains is onlyauthorised on the front wheels.
The selector must be in 4WD mode.

292Alphabetical index
Screen-wash reservoir..................................220Screen menu map .........................................280Screenwash, front.........................................153Screenwash fluid level..........................153,220Seat adjustment..............................................88Seat belts ...............................................173-175Seats, rear.......................................................r92Serial number, vehicle ..................................229Ser vice indicator.............................................r59Service warning light......................................52Servicing.........................................................37Setting the clock .............................................65Shor t-cut menus ...........................................240Sidelamps.............142, 145, 146, 191,194, 195Side repeater.................................................194Ski flap............................................................99Snow chain ....................................................229Spare wheel..................................................186Speed limiter.........................................r133,134Speedometer............................................r32,45Spotlamps, side ....................................149, 194Start.........................................................25, 203Starting the engine..............................28, 29,35Starting the vehicle .................................25,126Steering mounted controls, audio .................238Stopping the vehicle.........................25, 28,126Stop & Start....109, 112, 116, 202,216-219, 222Storage..............................................97, 98, 100Storage wells.................................................100Storing driving positions.................................89Stowing rings................................................100Switching off the engine...........................28, 29Switch off........................................................f25Synchronising the remote control.............73, 74Synthesiser, voice.........................................253System, navigation ........................................242
Table of weights ............................................227Tables of engines..................................225-227Ta bles of fuses..............................................198Te chnical data.......................................225-227Telephone.............................................259,261Temperature, coolant......................................57Temperature control for heated seats............90Temporary tyre repair kit...............................180Third brake lamp...........................................197TMC (Tr a f f i c i n f o)..........................................256To o l s..............................................................186To w b a r...........................................................r210Towed loads..................................................227Towing another vehicle...................44, 207,209Traction control (ASR)......................50,54, 170Traffic information (TA).........................257,271Traffic information (TMC)......................256,257Tr a i l e r............................................................r210Tr i p c o m p u t e r............................................r62,64Tyre pressures..............................................229Tyres................................................................37
Unlocking ..................................................66, 67Unlocking the boot ..........................................69Updating the date ............................................65Updating the time ............................................65USB (Peugeot Connect) .................................99
U
T
Xenon headlamps.........................................191
X
W
Warning lamps .................................... 48,51, 53Warning triangle............................................103Wash-wipe, rear............................................r153Weights.........................................................227Welcome function...........................................89Welcome lighting...........................................149Wiper, rear.....................................................r153Wiper control stalk .................................152-154
Wipers .............................................49, 152, 15 4
V
ehicle identification .....................................229Ventilation ............................... 42, 101, 106,107
V