2012 Peugeot 508 ESP

72
Comfort
Automatic tilting in reverse gear
System which provides a view of the ground
during parking manoeuvres in reverse gear.
Programming
)With the engine running, engage reversegear.)Select and adjust the left-hand andright-hand mirrors in succession.The adjustment is stored immediately.


Switching on
)
With the engine running, engage reverse gear. )
Move control Ato the right or to the left to select the corresponding mirror.
The glass of the mirror selected tiltsdownwards, in accordance with its
programming.


Switching off
)
Exit reverse gear and wait ten seconds.
or ) Return control Ato the central position.
The mirror glass returns to its initial position.
The mirror glass also returns to its initial
position:


- if the speed exceeds 6 mph
(10 km/h),

- if the engine is switched off.

3
81
i
Comfort





High load retaining net

Hooked onto the special upper and lower fixings, this allows the use of the entire loading
volume up to the roof:


- behind the front seats (row 1) when the rear seats are folded.

- behind the rear seats (row 2).


Never reposition the rear seats if thenet's roller is attached to the backs of the folded seats. )
position the net's roller above the two rails (located on the back of the folded rear seats),)
the two grooves Amust be placed above
the two rails B
. Slide the two rails B
in thegrooves Aand push the roller (lengthwise)from right to left to secure it,
)
check that the net is hooked and tightened correctly,
)
fold the rear seats,)
unroll the high load retaining net without stretching it, )
position one of the ends of the net's metal
bar in the corresponding upper fixing 1,) pull the net's metal bar to position the other end in the other upper fixing 1.
Row 1

(SW)

82
Comfort
)reel in then remove the load space cover, )position the left hand end of roller 2 in the load space cover suppor t,)position the right hand end of roller 2
in the load space cover support, then lock the position (red indicator),)from the rear bench seat, unroll the high load retaining net by pushing to disengage
the retaining hooks,
) position one of the ends of the net's metal
bar in the corresponding upper fixing 3,) pull on the net's metal bar to position theother end in the other upper fixing 3,)
check that the net is hooked and tensionedcorrectly.


Row 2

3
85
Comfort
Manual air conditioning


The air conditioning can only operate with the engine running.
1. Temperature adjustment
)
Turn the dial from left (cold) to right (hot) to adjust
the temperature to your
requirements.
2. Air fl ow adjustment
)
Press the "full fan"
button
to increase the air flow.
According to the value selected,
the associated line of LEDs fillsprogressively.
) Press the "empty fan"
button
to reduce the air flow.



3. Air distribution adjustment
)
press the corresponding button for:
Windscreen and side windows.
Central and side vents.
F
ootwells.
Depending on your requirements, you can combine two distribution buttonsor select the three distribution modes simultaneously.

3
87
i
Comfort





Dual-zone digital air conditioning


Automatic operation


1. Automatic comfort programme
)
Press this "AUTO"button. The indicator lamp comes on.

We recommend that you use this mode. It
automatically adjusts all settings to provide
optimum operation for the comfor t level chosen: passenger compar tment temperature, air flow, air distribution and air recirculation.
This system is designed to operate effectivelyin all seasons, with the windows closed.
When the engine is cold, to prevent too great a distribution of cold air, the air flow will reach its optimum levelgradually. In cold weather, it favours the distribution of warm air to thewindscreen, side windows and footwells only.


2 - 3. Driver-passenger sideadjustment

The driver and front passenger can each adjust
the temperature to their requirements.

The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
degrees Celsius or Fahrenheit.
)Turn control 2or 3to the left (blue) or to the right (red)
respectively to decrease or increase this value.

A setting around the value 21 providesoptimum comfort. However, depending on your
requirements, a settin
g between 18 and 24 is
normal.
It is recommended that the difference between
left and right should not be greater 3.
The air conditionin
g can only operate with the engine running.

3
89
!
Comfort

8. Air distribution adjustment
)Press the corresponding button for:
Windscreen and side windows.
Centre and side vents.
F
ootwells.
To s u i t
your requirements, you cancombine two distribution buttons or select the three distribution modes
simultaneously.
9. Air fl ow adjustment
)Press this "full fan"button
to increase the air flow.
)Press "empty fan"
button
to reduce the air flow.



10. Air intake/Air recirculation
)Press this "empty fan"air flow button until the fan symbol
disappears and "--"appears.
Switching the system off
) Press this button for recirculation of the interior air. The indicator
lamp on the button comes on.

Air recirculation enables the passenger compartment to be isolated from exterior odours and smoke. It is activated automatically
when operating the screenwash.

Avoid driving for long periods with the system off (risk of condensation and deterioration of the air quality).
Pressing the "full fan"button reactivates the system with the valuesin use at the time it was switched off. The air
flow symbol, the fan, fills progressively according to the value requested.
Thi
s action switches off all of the functions of the
air conditioning system.
Temperature related comfor t is no longer guaranteed but a slight flow of air, due to the forward movement of the vehicle, can still be felt.
)
As soon as possible, press this button
again to permit the intake of outside air and prevent the formation of condensation. The
indicator lamp in the button goes off.

90
Comfort





Quad-zone digital air conditioning
Automatic operation
1. Automatic comfort programme
The Soft/Auto/Fast modes allow the driver and front seat passenger to select their
desired comfor t settings for the passenger compartment:

2. Activating/deactivating the rear air conditioning


3 - 4. Driver-passenger side
adjustment

The driver and front passenger can each adjust
the temperature to their requirements.
The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
de
grees Celsius or Fahrenheit.

Favours optimum gentle and silent
operation by limiting the air flow.

Offers the best compromise between
thermal comfort and silence of
operation.
Favours d
ynamic and effective air
flow. Pr
ess this button to deactivate therear air conditioning and lock thesystem. A padlock appears in the
L
CD screen. When the rear system
is reactivated, automatic mode is selected with
the last temperature settin
gs used.
)
Turn control 3or 4to the left (blue) or to the right (red)
respectively to decrease or
increase this value.

A setting around the value 21 provides
optimum comfort. However, depending on your
requirements, a setting between 18 and 24 isnormal.
It is recommended that the difference between
left and right should not be greater 3. The air conditionin
g can only operate with the engine running.

92
Comfort
8. Air distribution adjustment
)Press this "full fan"
button toincrease the air flow.)Press the corresponding button for:

Windscreen and side windows.
Centre and side vents.

Footwells.
To s u i t
your requirements, you cancombine two distribution buttons or select the three distribution modes
simultaneously.
)Press "empty fan"button toreduce the air flow.
)Press this "empty fan"
air flow button until the fan symbol
disappears and "- -"appears.
Automatic air intake mode
It is activated by default with automatic comfort regulation.


9. Air fl ow adjustment
The symbol for air flow, the fan, fills
progressively according to the value requested.

Switching the system off

This action switches off all of the functions of theair conditioning system.
Temperature related comfor t is no longer
assured but a slight flow of air, due to the
for ward movement of the vehicle, can still be felt.
Avoid drivin
g for long periods with the system
o
ff (risk of condensation and deterioration of
the air quality). Pressing the "full fan"buttonreactivates the system with the values in use at
the time it was switched off.

10. Air intake/Air recirculation
Air recirculation enables the passenger compar tment to be isolated from exterior
odours and smoke. It is activated automatically
when operatin
g the screenwash. It is inactive
when the ambient temperature is below 5°C to
guard against the risk of misting in the vehicle. )As soon as possible, press this buttonagain to permit the intake of outside air and prevent the formation of condensation. The
indicator lamp in the button goes off.