2012 PEUGEOT 4007 display

11
AUDIO EQUIPMENT and TELEMATICS

Entering an address and starting guidance (2/2)

Press
Explanations
Result
Press [Street] and enter the name of a street using the touch keypad.
When a character of the name of the street is entered, if 5 streets or fewer
are recognised, you can select a street from a list which is displayed or
press [List].
Press [House #] and enter the number of the house using the touch keypad.
You can enter the name of a junction instead of the number
of the street. Press [Junction] and select the name from a
list which is displayed.
This is the result once all of the information has been entered:
If you agree with the information press [Set], otherwise press one of the
buttons to correct.
Press [Start] to start the navigation.
/

11
AUDIO EQUIPMENT and TELEMATICS
Press
Explanations Result
Press [Route].
Press [Display new route].
The system offers a detour route (dynamic guidance).
Press [Back] and enter to return to the previous screen.
The system asks you to confi rm or not the new route.

Press [Yes] to confi rm your choice. The system displays the name of the
new route.

Press [No] to not register the route.


Traffic information

During navigation, the system gives you
traffi c information received in real time.
The system can then suggest a detour
route, if dynamic guidance has been
activated by pressing MENU, [Naviga-
tion settings] then [TMC].

11
AUDIO EQUIPMENT and TELEMATICS
AUDIO-VIDEO AUDIO-VIDEO

What is RDS?
RDS station following
Tr a ffi c information function
Your radio automatically checks
and selects the best frequency
for the radio station to which it is
tuned (if the station broadcasts on se-
veral transmitters or frequencies).
The frequency of a radio station covers ap-
proximately 30 miles (50 km). The change
from one frequency to another explains
the loss of reception during a journey.
If the station to which you are listening
does not have several frequencies in
the region in which you are currently
located, you can deactivate the auto-
matic frequency following.


Radio, RDS, AF, REG, TP, PTY

Radio Data System (RDS) function
on the FM waveband permits:


- tuning to the same station while
travelling through different regions
(if the transmitters of this station
cover the area through which you
are travelling),

- temporary tuning to traffi c information
announcements,

- display of the name of the station,
etc...
Most FM stations use RDS.
These stations transmit non-audible
data in addition to their programmes.
The data transmitted in this way allows
you access to various functions, mainly
displaying of the name of the station,
temporary tuning to traffi c information
announcements or automatic station
following.
RDS allows you to continue listening to
the same station by means of the fre-
quency following. However, in certain
conditions, this RDS frequency follo-
wing cannot be provided throughout
the country. Radio stations do not cover
the whole country, which explains the
loss of reception of the station during
a journey. The Traffic Program (TP) func-
tion permits automatic and
temporary switching to an FM
station broadcasting traffi c information.
The radio station or the source that you
are listening to at this point is paused.
Once the traffi c information has ended,
the system switches back to the radio
station or the source that you were lis-
tening to initially.

Regional following mode
Some stations are organised in
a network.
In different regions, they broad-
cast different or shared programmes de-
pending on the time of day.
You can follow:


- a regional station only,

- the entire network, with the possibility
that you will be listening to a different
programme.

Programme types

Some stations offer the option of
listening to a themed type of pro-
gramme as a priority, selected from
the list available below:
NEWS, AFFAIRS, INFOS, SPORT,
EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M, ROCK M, EASY M,
LIGHT M, CLASSICS, OTHER M,
WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL,
LEISURE, JAZZ, COUNTRY, NATION M,
OLDIES, FOLK M, DOCUMENT.

11
AUDIO EQUIPMENT and TELEMATICS















Information displayed in Radio mode



A.
A pre-set number is displayed when a
pre-set channel has been selected.

B.
The name of the station is displayed
during the reception of RDS data. If
the name has not been transmitted,
the frequency is displayed.

C.
Stereo is displayed when a stereo
transmission is received.

D.
AF is displayed when the AF control
function is activated.

E.
PTY (programme type) is displayed
if the RDS data received is dis-
played.
TRAFINF is displayed, during an in-
terruption, for traffi c information.
ALARM is displayed, during an in-
terruption, for urgent information.

F.
Display of 6 pre-set stored stations.
G.
To receive the stored station.
Press and hold to store a station.

H.
To change the frequency step by
step.
Press and hold for scrolling of the
frequency.

I.
To search for currently broadcast-
ing stations which can be received
in the current location, until a station
is found.

J.
To display the programme types
pre-setting screen, e.g.: sport, rock,
classical, news, ... Press PTY again
to exit.

K.
Press this button to display the sec-
ondary menu.

L.
REG is displayed during the reception
of regional frequencies data.

M.
RDS is displayed during the reception
of RDS data.

N.
TP is displayed when the traffi c infor-
mation is in standby mode.

ABCDE
G
HIJK
LMN
F

11
AUDIO EQUIPMENT and TELEMATICS

Radio, selecting an FM station and storing

Press the MODE button. Press Explanations Result




You can select [ 
Seek] or [Seek 
] to start a continuous
search until the stations which can be received in the current
location are detected. Press FM. By default the screen shows the FM1 stations.


Press [ 
Tune] to decrease the frequency or [Tune 

] to increase the
frequency. The frequency is changed in steps of 0.1 MHz.
Continue to press to tune to a station automatically.
Once the frequency has been selected, a long press on the station (e.g. 3)
will store it.
The name of the station (e.g. PS name 1) is displayed if it is available.
You can start automatic storing on FM3 for 6 stations, which
can be received in the current location, by pressing [^] then
[Auto-Store]. You can also start a search by type of programme by pressing
[PTY].

11
AUDIO EQUIPMENT and TELEMATICS





















CD player

Your Audio-Telematic system allows you
to listen to audio CDs (CDDA, CD-Text,
CD-R/RW) or MP3 and WMA CDs.

Playing an audio CD
When the audio CD is in-
serted in the player, playing
of the tracks is automatic
and they can be recorded
onto the hard disk.
Simultaneous access to the music re-
cognition service "Gracenote CDDB"
on the hard disk permits display of the
title information. Switching off the engine or removing
the CD during recording will result in
the tracks being faulty.
The operation of the navigation system
may slow down during recording.
The recording speed may be slower
than 4x due to the processing load on
the equipment or the condition of the
audio CD.
If jumps or other errors occur, return to
the beginning of the track and start the
recording again.
Even if there is no gap between the
tracks on the CD, a brief silence be-
tween tracks is stored on the hard disk.
What is the Gracenote CDDB?

Copyright
Your Audio equipment may allow you
to listen to music which is usually pro-
tected by copyright in accordance
with current national and international
standards. Please consult these stand-
ards and comply with them.

Recording onto the music server
The tracks of audio CDs (not
MP3/WMA) can be recorded
onto the hard disk at approximately 4x
speed (e.g.: 60 minutes converted to
15 minutes) and stored on the music
server.
The sounds recorded may be altered
by the noise present and the quality of
the sound may differ from the original.
The tracks recorded on the music server
cannot be reproduced on another medi-
um (CD-R/RW, HDD, etc...).
Previously recorded tracks cannot be
recorded again from the same CD. The title information for the
track currently being played
can be obtained from the
"Gracenote CDDB" database
stored on the hard disk.
The Gracenote company uses this
standard to identify the music and the
associated information such as:


- the title of the album,

- the name of the artist,

- the title of the tracks,

- the genre, ...
For further details, consult the site:
www.gracenote.com.
The Gracenote CDDB database incorpo-
rated in this equipment cannot guarantee
the content of the data 100 %. You can
update this database using a DVD sold
separately.

11
AUDIO EQUIPMENT and TELEMATICS

Information displayed in CD mode and recording a CD



A.
The name of the album is displayed
for the track currently being played.

B.
The name of the artist is displayed for
the album currently being played.

C.
The playing time of the track cur-
rently being played is displayed.

D.
The playing mode currently selected
is displayed.

E.
Position of the cursor and total
number of tracks on the album.

F.
Displays the item currently selected.

G.
To scroll up or down through the
tracks.
Press and hold for fast backwards
or forwards playing of a track.
H.
Displays the number and the name of
the track. While driving, they are not
available and cannot be selected.

I.
To display the secondary menu.

J.
Move the cursor onto the track cur-
rently being played.

K.
The number and the name of the track
currently being played are displayed.

L.
During recording, this symbol is
displayed in red and it switches off
when all recording operations are
complete. The number indicates the
percentage of the total number of
tracks on the CD already recorded
onto the hard disc. 00 % when only
one track has been recorded.

M.
The tracks which have not been re-
corded are displayed in blue.
No symbol is displayed for tracks
which have been recorded.
The CD button is only active if the player
contains a CD.
Press Open to return the screen to the
vertical position.
ABC
DE
F
GHI
J
K
L
M

11
AUDIO EQUIPMENT and TELEMATICS

Information displayed in Music Server mode



A.
The number and the name of the track
currently being played are displayed.

B.
The number and the name of the
playlist currently being played are
displayed.

C.
The name of the artist is displayed for
the playlist currently being played.

D.
The playing time of the track cur-
rently being played is displayed.

E.
The playing mode currently selected
is displayed.

F.
Group lists: position of the cursor
and total number of groups.
Playlists: position of the cursor and
total number of playlists.
Track lists: position of the cursor
and total number of tracks.
G.
To display the list of groups, the
playlist and the list of tracks.

H.
To scroll up or down through the
tracks.
Press and hold for fast backwards
or forwards playing of a track.

I.
To scroll up or down through the
playlists.

J.
Group lists: number and name of
the group.
Playlists: number and name of the
playlist.
Track lists: number and name of the
track.

K.
To display the secondary menu.

L.
Displays the item currently selected.

M.
Move the cursor onto the track cur-
rently being played.

ABCD
E
F
G
HIJK
L
M