2012 NISSAN LEAF charging

— Do not use if a malfunctionoccurs or if charger has been
damaged in any manner. Return
to a NISSAN certified LEAF deal-
er for replacement.
— The charger contains no user serviceable parts. Do not at-
tempt to repair the charger,
doing so will void your warranty.
CAUTION
. Only charge using a standard 110 -
120 volt, 15A dedicated electrical
outlet (For example do not use an
electric generator) . Failure to do so
may cause charging to fail and could
cause damage to the Li-ion battery
charging equipment due to power
surges.
. NISSAN recommends using genuine
NISSAN charging equipment to
charge the vehicle. Using non-
NISSAN equipment could cause
the Li-ion battery to not charge
correctly and may damage the Li-
ion battery.
. Trickle charging is performed using an AC
110 - 120 volt, 15A dedicated electrical
outlet using the EVSE (Electric Vehicle
Supply Equipment) provided with the vehi-
cle.
. The genuine NISSAN EVSE (Electric Vehi-
cle Supply Equipment) charging equipment or trickle charge cable performs a commu-
nication function with the vehicle before Li-
ion charging starts. If this communication
does not occur because other equipment is
used, the Li-ion battery will not charge.
. Immediate charge, charging timer and re-
mote charge can be performed in the trickle
charge mode. See “Charging timer” and
“Charging related remote function” later in
this section.

NOTE:
To stop charging mid-charge, remove the
charge connector. Charging automatically
stops.
HOW TO QUICK CHARGE (if so
equipped)
Quick charge uses public charging stations (up
to 50 kW of power) to charge the battery in a
short period of time.
WARNING
.Always use a quick charger that is
compatible with the LEAF. Using an
incompatible quick charger may
cause a fire or malfunction resulting
in serious personal injury or death.
. Before starting the quick charge,
carefully read the instructions pro-
vided on the quick charger and
make sure the quick charge con-
nector is properly connected and
locked. Failure to connector or op-
erate the quick charger correctly
could cause damage to the vehicle
or the charging equipment. NOTE:
Quick charging is possible (even several
times a day) if the battery temperature is
not near the red zone. If the battery
temperature reaches the red zone, in order
to protect the battery, quick charging is not
allowed and the power limitation mode
will be triggered.

4. Align*1with the groove of the charge port
and insert the charge connector.
CAUTION
. Be sure to insert the charge con-
nector straight into the quick charge
port right up to the base. Failure to
do so may result in the Li-ion battery
not charging or could cause damage
to the charging equipment.

.When the possible charge time set for the
quick charger is exceeded
NOTE:
. Charging may automatically stop even
if it is not completed.
. If charging stops mid-charge, you can
restart charging by pressing the start
button on the quick charger again.
. The charge connector is locked to the
charge port during charging and can
not be disconnected. Follow the in-
structions on the quick charge equip-
ment to stop charging. Confirm
charging is stopped by looking at the
indicators on the dash. The charge
connector can be disconnected from
the vehicle when charging is stopped.
. When quick charging, the Li-ion battery
charging rate is slower as the percen-
tage available battery charge available
increases.CAUTION
.As the quick charge connector is
heavier in comparison to the other
charge connectors, allowing it to
drop could cause damage to the
vehicle or charge connector or per-
sonal injury. When removing the
connector, be sure to pull it out
straight and as carefully as possible.

and
touch [Charging Timer].

and
touch [Charging Timer].

.Pay particular attention when using
the normal charge port as the
charge port lid can be closed even
when the normal charge port cap is
open.
. Close the quick charge (if so
equipped) port cap before closing
the charging lid. The quick charge
port cap can be damaged if it is
open when closing the charge port
lid.

.While the battery is being charged, the
Climate Ctrl. Timer cannot be operated until
the Li-ion battery available charge gauge
reached the full mark. When the battery is
not being charged, the Climate Ctrl. Timer
can be operated, even if the Li-ion battery
available charge gauge has not reached the
full mark.
. When the climate control is set on first
priority, the Climate Ctrl. Timer works
regardless of the remaining battery energy.
. If the Climate Ctrl. Timer starts its operation
while the vehicle is being charged, the
charging time will be prolonged.
. Operating the Climate Ctrl. Timer or remote
climate control in an environment with low
temperature may decrease the rate of
battery charge.
. The Climate Ctrl. Timer settings cannot be
modified while it is operating. If timer
settings are modified while the Climate Ctrl.
Timer is operating, these changes will be
reflected the next time the Climate Ctrl.
Timer operates.
. When charging is set as the first priority, the
Climate Ctrl. Timer does not start until 10
segments of the LI-ION BATTERY AVAIL-
ABLE CHARGE GAUGE are illuminated. .
When the climate control is set as the first
priority, the climate control system will be
turned on as scheduled by the Climate Ctrl.
Timer regardless of the remaining battery
energy.
. Even when the climate control is set as the
first priority, the climate control system will
be turned off when the climate control
spends more electric than the charging Li-
ion battery.
. The Li-ion battery may not charge or may
even become discharged if the Climate Ctrl.
Timer or remote climate control is used in
low ambient temperatures.
REMOTE CLIMATE CONTROL
This vehicle incorporates a communication
device that is called a TCU (Telematics Com-
munication Unit). The communication connec-
tion between this unit and NISSAN CARWINGS
Data Center allows for various remote function
services.
Even when away from the vehicle, climate
control can be started by accessing the
NISSAN CARWINGS Data Center website
using a cellular phone or a personal computer.
When operation is started, or at the set start
time, the NISSAN CARWINGS Data Center accesses the vehicle. When the vehicle receives
a command for remote operation, the climate
control immediately turns ON and operates for
the specified period of time. Confirmation of the
ON/OFF of the climate control operation can be
checked by accessing the website or by e-mail.
Establishing the CARWINGS
TMservice is ne-
cessary before using the service. See LEAF
Navigation System Owner’s Manual.