2012 MITSUBISHI OUTLANDER XL clock

[x] Cancel search: clock

Page 665 of 714

MITSUBISHI OUTLANDER XL 2012  Owners Manual 7-64 Vehicle care and maintenance
7
3. While holding down the tab (D), pull out the socket (E). 4. Turn the bulb (F) counterclockwise to remove it.
BK0138000US.book  64 ページ  2011年4

Page 667 of 714

MITSUBISHI OUTLANDER XL 2012  Owners Manual 7-66 Vehicle care and maintenance
7
2. Turn the socket and bulb assembly counterclockwise to
remove it.NOTEThe tail and stop light uses an LED instead of the bulb.
Check with an authorized Mitsubishi

Page 669 of 714

MITSUBISHI OUTLANDER XL 2012  Owners Manual 7-68 Vehicle care and maintenance
7
3. Turn the socket (A) counterclockwise to remove it. 4. Pull the bulb out of the socket.
5. To install the bulb, perform the removal steps in reverse.
BK0138000US.

Page 671 of 714

MITSUBISHI OUTLANDER XL 2012  Owners Manual 7-70 Vehicle care and maintenance
7
4. Remove the socket and bulb assembly (C) together by
turning it counterclockwise, and then remove the bulb by
pulling it out.
5. To install the bulb, perform the

Page 677 of 714

MITSUBISHI OUTLANDER XL 2012  Owners Manual 7-76 Vehicle care and maintenance
7
3. To install the bulb, perform the removal steps in reverse.NOTEBefore replacing the bulb, put the dome light (rear)/cargo
room light switch into the “OFF” po

Page 707 of 714

MITSUBISHI OUTLANDER XL 2012  Owners Manual Alphabetical index
2Power brakes 3-129
Service brake 3-128
Warning lights 3-210
Break-in recommendations 3-2
Bulb capacity 7-49
C
California Perchlorate Materials Requirements 1-9
Capacities 9-11
Card
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48