2012 MITSUBISHI OUTLANDER wheel

[x] Cancel search: wheel

Page 580 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual For emergencies
6-7
6 Jack and tools
N00836600340
StorageThe jack and tools are stowed on the right side of the luggage
compartment.
Tools
1- Jack
2- Tools
1- Tool case
2- Wheel nut wrench
3- Bar
BK01

Page 584 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual For emergencies
6-11
6
NOTEThe chocks shown in the illustration do not come with
your vehicle. It is recommended that you purchase chocks
or blocks and keep them in the vehicle for use if needed.
If

Page 585 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual 6-12 For emergencies
6
To remove the spare tire
N00849700260
1. Open the tailgate and use the bar to remove the cover (A)
over the tire hanger mounting bolt.
Refer to “Flap-fold tailgate: To open”

Page 586 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual For emergencies
6-13
6
2. With the wheel nut wrench, loosen the tire hanger mount-
ing bolt by turning it counterclockwise.
3. Raise the lower gate until it clicks and locks.
Refer to “Flap-fold tai

Page 587 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual 6-14 For emergencies
6
To install
N00860500027
1. Place the tire on the center of the tire hanger, with the
wheel surface facing upwards.2. Lift up the tire hanger (A) and hook it on the hook (B).
CAU

Page 588 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual For emergencies
6-15
6
3. Open the lower gate.
Refer to “Flap-fold tailgate: To open” on page 3-60.
4. With the wheel nut wrench, firmly tighten the tire hanger
mounting bolt by turning it clockwi

Page 589 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual 6-16 For emergencies
6
2. Place the jack under one of the jacking points (A) shown
in the illustration. Use the jacking point closest to the tire
you wish to change.
NOTEPut the spare wheel under the

Page 590 of 714

MITSUBISHI OUTLANDER 2012 3.G Owners Manual For emergencies
6-17
6
3. Rotate the jack by hand until the flange portion (B) fits in
the groove (C) at the top of the jack.4. Insert the bar (D) into the wheel nut wrench (E). Then put
the end of th