7AUDIO SYSTEM
1. Press the LOAD button F briefly.
2. The autochanger will show “WAIT” on the display and start
making itself ready for disc loading.
3. When the autochanger is ready for disc loading, the LOAD
indicator will illuminate and the display will show “LOAD DISC
No. (1-6)”.
4. When a disc is inserted into the CD slot, the disc will begin to
play.
NOTE: Please refer to Comfort Controls in your Owner’s Manual
for more detailed information on how to use your audio
system.
NOTE: You can select desired tracks from
the “Playlist”, “Artists”, “Album” or
“Songs” menus stored in your iPod or
desired folder in your USB memory
device. Turn the FOLDER knob D to
the desired location then press it in to
select your folder.
USB and iPod Input (if -equipped)
Loading a CD
Audio Remote
Control Switch (if equipped)VOLUME UP
DOWNSEEK
Change
station or
track
MODE
Change
the audio
source
1. Park your vehicle in a safe place and turn the ignition to the
lock position.
2. Connect the cable
(cable is not included with the vehicle)
to the USB memory device
or the Dock connector to
the iPod
.
3. Open the cover
in the glove compartment. Connect the
cable
to the USB input terminal .
4. Turn the ignition switch to the “ACC” position. Press A to
turn on the audio system.
5. Press the CD button B several times to switch to the USB
mode. The input mode changes as follows:
CD
USB Bluetooth® (if equipped)
6. Depending on your USB device, it may take longer for
playback to start.
7. Once the device is selected, playback starts.
AF
CB
D
To enter frequencies
into the memory
(AM/FM/SAT)
1. Press A to turn on
the audio system.
2. Press B to select
CD.
3. Press C to select
the desired band
(AM/FM/SAT).
4. Turn D to the desired frequency you wish to keep in the memory.
5. Press one of the Memory select buttons E (1-6) until it beeps.
Your station is now stored in that location.
E
