2012 MITSUBISHI iMiEV light

Vehicle care and maintenance
7-51
7
NOTE
Do not use cleaners, conditioners, and protectants contain-
ing silicones or wax.
Such products, when applied to the instrument panels or
other parts, may cause reflections on the windshield and
obscure vision.
Also, if such products get on the switches of the electrical
accessories, it may lead to failure of these accessories.Upholstery
N00945500144
1. To maintain the value of your new vehicle, maintain the
upholstery carefully and keep the interior clean.
Use a vacuum cleaner and brush to clean the seats. If
stained, vinyl and synthetic leather should be cleaned with
an appropriate cleaner. Cloth fabrics can be cleaned with
either upholstery cleaner or a mild soap and water solu-
tion.
2. Clean the carpeting with a vacuum cleaner and remove
any stains with carpet cleaner. Oil and grease can be
removed by lightly dabbing with a clean white cloth and
spot remover. NOTE
If fuzzing is difficult to remove from the seat upholstery,
draw a suitable defuzzing brush over the surface in one
direction.Genuine leather
(if so equipped)
N00945600275
1. To clean, lightly wipe the leather with a soft cloth soaked
in a mild soap and water solution.2. To rinse, dip the cloth in fresh water, wring it out well, and
wipe off all the soap.
3. To preserve and protect, use a leather protecting agent on
the genuine leather surface.
NOTE
If genuine leather is wet with water, wipe it with a dry,
soft cloth. If left damp, mildew may grow.

The genuine leather surface can be damaged if brushed
with a nylon or synthetic fiber brush.

Organic solvents such as benzine, kerosene, alcohol, gaso-
line, acid or alkaline solvents can discolor the genuine
leather surface and should not be used.

The genuine leather surface may harden and shrink if it is
exposed to the direct sunlight for long hours. When your
vehicle is parked, place it in the shade as much as possi-
ble.
BK0140800US.book 51 ページ ２０１１年９月２９日　木曜日　午後３時２８分

7-52 Vehicle care and maintenance
7Cleaning the outside of your vehicle
N00945700061
To protect your vehicle’s finish, wash it often and thoroughly.
If desired, you may wax your vehicle using a nonabrasive auto-
mobile wax. Foreign material
N00945800046
Industrial pollution, road tar, bird droppings, tree sap, insect
remains, sea water and other foreign matters can damage the
finish on your vehicle.
Generally, the longer any foreign material stays on the finish,
the worse the damage. Wash your vehicle as soon as possible
whenever the finish gets soiled.Wa s h i n g
N00945900627
Chemicals contained in the dirt and dust picked up from air,
rain, snow or road surfaces can damage the paint and body of
your vehicle if left on.
Frequent washing and waxing is the best way to protect your
vehicle from this damage.
Do not wash the vehicle in direct sunlight. Park the vehicle in
the shade and spray it with water to remove dust. Next, using
plenty of clean water and a car washing mitt or sponge, wash
the vehicle from top to bottom.
Use a mild car washing soap if necessary. Rinse thoroughly
and wipe dry with a chamois or soft cloth. After washing the
vehicle, carefully clean the joints and flanges of the doors,
hood, etc., where dirt is likely to remain.
WA R N I N G
!
Do not wash the vehicle while charging the main
drive lithium-ion battery.
Doing so could cause a fire or an electric shock.
Before washing the vehicle, make sure that the
charging lid and the inner lid are completely closed.
If the lid is open, the charging unit is exposed to
water, resulting in a fire or an electric shock.
Do not pour water inside the electric motor unit
room. Doing so could cause a fire or an electric
shock.
CAUTION
!
When washing the vehicle, turn the electric motor
switch to the “LOCK” position.
Do not use a high pressure washing machine to clean
the underneath of the vehicle.
Doing so might cause the electric motor unit prob-
lem or malfunction.
When washing the underside of your vehicle or the
wheels, wear a pair of gloves to protect your hands.
Never spray or splash water on the electrical parts
in under the hood. This may damage them. Be care-
ful also when washing the underbody. Do not spray
water up under the hood.
BK0140800US.book 52 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Vehicle care and maintenance
7-53
7
During cold weather Salt and other chemicals spread on winter roads in some geo-
graphical areas can have a detrimental effect on the vehicle
underbody. You should flush the underbody with a high pres-
sure hose every time you wash the outside of your vehicle.
Take special care to remove mud or other debris which could
trap and hold salt and moisture.After washing your vehicle, wipe off all waterdrops from the
rubber parts around the doors to prevent the doors from freez-
ing.
NOTE
When the door is frozen, opening it by force may tear off
or crack the rubber gasket installed around the door. Pour
warm water to melt the ice. Be sure to thoroughly wipe off
the water after opening the door. To prevent freezing of
the weatherstripping on the doors, hood, etc., treat with
silicone lubricant.Waxing
N00946000247
Wax your vehicle once or twice a year, or when water does not
bead up on the paint.
Use a soft cloth to put a small amount of wax on the painted
surfaces. After the wax has dried, polish with a dry soft cloth.
Do not wax your vehicle in direct sunlight.
You should wax when the painted surfaces are cool.

Avoid automatic car washers that use rotating
brushes. These brushes may scratch the paint sur-
face and make it dull.
Scratches are more noticeable on darker colored
vehicles.
Some hot water washing equipment uses high pres-
sure and heat to clean your vehicle. This heated
water may damage your vehicle’s resin parts. It can
flood the interior of the vehicle. Therefore, be sure
of the following:
• Keep the washing nozzle at least 28 inches (70 cm)
away from the vehicle body.
• When washing around the door glass, hold the
nozzle at a distance of more than 28 inches (70 cm)
and at right angles to the glass surface.

Make sure to do the following when using an auto-
matic car wash, with help from either this manual or
the car wash operator, to avoid damaging your vehi-
cle:
• Fold the outside mirrors.
• Remove the antenna.
• Tape the wiper arm assembly.CAUTION
!
CAUTION
!
Waxes containing high abrasive compounds should
not be used. These waxes remove rust and stain
effectively from the paintwork, but are harmful to
the finish on the paint and the plate, because they
also remove clearcoat.
They are also harmful to other glossy surfaces such
as the grille, trim, moldings, etc.
Do not use gasoline, kerosene, benzine or paint thin-
ners to remove road tar or other dirt from the vehi-
cle surface.
BK0140800US.book 53 ページ ２０１１年９月２９日　木曜日　午後３時２８分

7-54 Vehicle care and maintenance
7
Polishing
N00946100059
If painted surfaces have been severely damaged and lost their
original luster and color tone, polish the surface lightly with a
fine polishing compound. Avoid limiting your polishing to the
damaged surface only; polish a somewhat wider area, moving
the polishing cloth in one direction. After polishing, flush the
compound from the surface and apply a coat of wax to regain a
beautiful luster.
Damaged paint
N00946200089
Small cracks and scratches in the paint coat should be touched
up as soon as possible with touch-up paint to prevent corrosion.
Check body areas facing the road or the tires carefully for dam-
age to the paint caused by flying stones, etc. The paint code
number for your vehicle can be found on the vehicle informa-
tion code plate. Refer to “Vehicle information code plate” on
page 9-2.

Do not put wax on the areas having black matte
coating because it can cause uneven discoloration,
patches, blurs, etc. If these get wax on them, wipe
the wax off right away with a soft cloth and warm
water.
CAUTION
!
BK0140800US.book 54 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Vehicle care and maintenance
7-55
7
Cleaning plastic parts
N00946300211
Use a sponge or chamois to clean these parts.
If a vehicle wax sticks to a gray or black rough surface of the
bumper, molding or lights, the surface may appear white in
color. In this case, wipe it off using lukewarm water and a soft
cloth or chamois. Chrome parts
N00946400065
To prevent spots and corrosion of chrome parts, wash with
water, dry thoroughly, and apply a nonabrasive automotive
wax. If the chrome is severely damaged or pitted, use a com-
mercially available chrome polish.
Aluminum wheels (if so equipped)
N00946500196
1. Remove dirt using a wet sponge.
2. Use a mild detergent on any dirt that cannot be removed
easily with water.
Rinse off the detergent after washing the wheel.
3. Dry the wheel thoroughly using a chamois leather or a soft
cloth.Window glass
N00946600067
The window glass can usually be cleaned using only a sponge
and water. Glass cleaner can be used to remove wax, oil,
grease, dead insects, etc. After washing the glass, wipe it dry
with a clean, dry, soft cloth.
CAUTION
!
Do not use a scrubbing brush or other rough scrub-
ber as these may damage the plastic surface.
Do not use wax containing compounds (polishing
powder) which may damage the plastic surface.
Do not let the plastic parts get soiled with gasoline,
oil, brake fluids, greases, paint thinner, and sulfuric
acid (battery electrolyte). These fluids, etc., may
crack, stain or discolor the plastic parts.
If any of these get on the plastic parts, wipe them up
with a soft cloth or chamois and a mild solution of
soap and water. Then rinse them immediately with
water.
CAUTION
!
Do not use a brush or other hard implement on the
wheels.
Doing so could scratch the wheels.
Do not use any cleaner that contains an abrasive
substance or is acidic or alkaline. Doing so could
cause the coating on the wheels to peel or become
discolored or stained.
Do not directly apply hot water using a steam
cleaner or by any other means.
Contact with seawater or road salt used for de-icing
can cause corrosion. Rinse off such substances as
soon as possible.
BK0140800US.book 55 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Alphabetical index
1
A
Accessory (installation) 1-7
Acoustic vehicle alerting system (AVAS) 3-38
Active stability control 3-46
ASC indicator 3-48
ASC OFF indicator 3-48
ASC OFF switch 3-47
Skid control function 3-47
Traction control function 3-46
Air conditioning 5-6
Important air conditioning operating tips 5-17
Air purifier 5-18
Aluminum wheels 7-55
Antenna 5-40
Anti-lock braking system 3-41
Warning light 3-42
,3-43
ASC 3-46
ASC indicator 3-48
ASC OFF indicator 3-48
ASC OFF switch 3-47
Assist grip 3-131
Audio
AM/FM electronically tuned radio with CD player 5-18
Error codes 5-37
Handling of compact discs 5-38
Steering wheel audio remote control switch 5-34
B
Back up lights
Bulb capacity 7-36
Replacement 7-42
Ball joint, steering linkage seals and drive shaft boots 7-27
Battery
Disconnection and connection 7-16
During cold weather 7-15
Main drive lithium-ion battery 1-4
12V starter battery charging system warning light 3-74
Bluetooth
® 2.0 interface 3-91
Brake
Anti-lock braking system 3-41
Braking 4-8
Fluid 7-12,9-10
Hose 7-27
Parking brake 3-25
Parking brake lever stroke 7-25
Pedal 3-39
Pedal free play 7-25
Power brakes 3-39
Service brake 3-39
Warning light 3-73
Brake assist system 3-40
Break-in recommendations 3-2
Bulb capacity 7-36
BK0140800US.book 1 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Alphabetical index
2
C
California Perchlorate Materials Requirements 1-9
Capacities 9-10
Card holder 3-123
,3-129
Cargo loads 4-13
Certification label 9-5
Charging
Quick charging 1-33
Regular charging 1-20
,1-32
Charging indicator 3-72
Charging Timer 1-48
Charging troubleshooting guide 1-38
Chassis number 9-3
Child restraint 2-23
Child safety locks for rear door 3-15
Cleaning
Inside of your vehicle 7-50
Outside of your vehicle 7-52
Clock 5-41
Cold
Cautions and actions to deal with intense cold 1-12
Combination headlights and dimmer switch 3-76
Consumer information 8-2
Coolant 7-7
,9-10
Cruising range 1-5
Cruising range indicator 3-61
,3-67
Cup holder 3-130
D
Dash lights brightness indicator 3-61
,3-66
Daytime running lights
Bulb capacity 7-36
Replacement 7-40
Defogger (rear window) 3-89
Dimensions 9-6
Dimmer (high/low beam change) 3-81
Dinghy towing 4-14
Disc brake pads 7-27
Dome light (Front)/Reading lights
Bulb capacity 7-37
Switch 3-125
Dome light (Rear)
Bulb capacity 7-37
Switch 3-127
Door-ajar warning light and buzzer 3-74
Doors
Lock 3-12
Power door locks 3-14
Driver’s seat belt reminder/warning light 2-17
Driving during cold weather 4-7
Driving, alcohol and drugs 4-3
E
Economical driving 4-2
Electric motor
Number 9-4
BK0140800US.book 2 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Alphabetical index
3
Specifications 9-8
Electric motor switch 3-30
Electric motor unit warning light 3-75
Electric power steering system (EPS) 3-44
Electric rear window defogger switch 3-89
Electronic immobilizer (Anti-theft starting system) 3-3
Energy level gauge 3-69
Energy usage indicator 3-60
EV charging cable 1-28
F
Floor mat 4-3
Fluid
Brake fluid 7-12
,9-10
Coolant 7-7
,9-10
Hot water heater fluid 7-7
,9-10
Washer fluid 7-11
,9-10
Fluid capacities and lubricants 9-10
Front fog lights
Bulb capacity 7-36
Indicator 3-72
Replacement 7-40
Switch 3-83
Front seats 2-3
Front side-marker lights
Bulb capacity 7-36
Replacement 7-38
Front turn signal lights
Bulb capacity 7-36Replacement 7-40
Fuses 7-29
Fusible links 7-28
G
Gauges 3-58
General maintenance 7-27
General vehicle data 9-6
Genuine parts 1-9
Glove compartment 3-129
H
Hazard warning flasher switch 3-83
Hazard warning lights 3-72
Head restraints 2-10
Headlights
Bulb capacity 7-36
Dimmer 3-81
Headlight flasher 3-81
Reminder buzzer 3-80
Switch 3-76
Heat
Cautions and actions to deal with intense heat 1-10
High beam indicator 3-72
High-mounted stop light
Bulb capacity 7-36
Replacement 7-45
High-Voltage components 1-41
Hood 7-4
BK0140800US.book 3 ページ ２０１１年９月２９日　木曜日　午後３時２８分