Vehicle care and maintenance
7-3
7
Have you purchased the Mitsubishi Motors Diamond Care Pro-
tection Plan? The Plan supplements your new vehicle warran-
ties. See a certified i-MiEV dealer for details.
WA R N I N G
!When servicing the vehicle, make sure that the elec-
tric motor switch is in the “LOCK” position and the
charging cable is disconnected. Failure to do so
could result in an electric shock.When checking or servicing under the hood or the
coolant reserve tank, be sure the electric motor unit
is stopped and it has had a chance to cool down. If you need to work under the hood with the electric
motor unit on, be careful that your clothing, hair,
etc. does not get caught in the fan or other moving
parts.The fan can turn on automatically even if the elec-
tric motor unit is not running. Turn the electric
motor switch to the “LOCK” position to be safe
while you are working under the hood.Do not smoke or allow open flames around the 12V
starter battery.Be extremely careful when working around the 12V
starter battery. It contains poisonous and corrosive
sulfuric acid. Handling your vehicle’s parts and materials in the
wrong way can injure you. Ask a certified i-MiEV
dealer if you have questions.
CAUTION
!The components inside the electric motor unit room
may be very hot to the touch.
Make sure all components have sufficiently cooled
before beginning an inspection.
These components are affixed with a label indicating
precautions for handling. Follow the instructions on
the label.When replacing the 12V starter battery, remove the
positive (+) and negative (-) terminals after turning
the electric motor switch to the “LOCK” position
and waiting at least 2 minutes. If the 12V starter
battery terminal is removed just after the electric
motor switch is turned to the “LOCK” position, this
may cause damage to electric components.
If the electric motor unit warning light illuminates,
do not replace the 12V starter battery. Contact a
certified i-MiEV dealer.
BK0140800US.book 3 ページ 2011年9月29日 木曜日 午後3時28分
Vehicle care and maintenance
7-15
7
During cold weather
N00901600057
The 12V starter battery is weaker in cold temperatures. This
has to do with its chemical and physical properties and is why a
very cold 12V starter battery, especially one with a low charge,
will have a hard time starting your vehicle.
It is recommended that you have your 12V starter battery and
charging system checked by a certified i-MiEV dealer before
the start of cold weather. If necessary, have it charged. This
will guarantee more reliable starting, and longer 12V starter
battery life.
Electrolyte (battery acid) is made of corrosive
diluted sulfuric acid. If it spills on nearby parts, it
can crack, stain, or discolor them. And if gets on
your skin or in your eyes, it can cause burns or
blindness. Please observe the following handling
instructions:
• If electrolyte gets on plastic parts or other nearby
parts, wipe it off with a soft cloth or chamois
soaked in a solution of water and neutral detergent
then immediately rinse the affected parts with
plenty of water.
• If electrolyte gets on your hands or clothes, rinse
thoroughly with water. If electrolyte gets in your
eyes, flush them with water immediately and get
immediate medical attention.WA R N I N G
!
BK0140800US.book 15 ページ 2011年9月29日 木曜日 午後3時28分
Vehicle care and maintenance
7-17
7
NOTEBefore cleaning the 12V starter battery, tighten all the
filler port caps to keep dirt and moisture out.
Check each 12V starter battery terminal for corrosion. If
necessary, clean the terminals with a solution of baking
soda and water. Grease the posts and clamps after clean-
ing or tightening them.
Check to see that the 12V starter battery is securely
installed and cannot be moved. Also check each terminal
for tightness.
If you will not be driving your vehicle for a long period of
time, remove the 12V starter battery and store it in a place
where the 12V starter battery fluid will not freeze. Mem-
ory data for settings made by the user may be erased when
the 12V starter battery is removed. If this happens, reset
the settings again using the relevant procedures. The 12V
starter battery only should be stored with a full charge.
WA R N I N G
!Open doors and windows in any closed space where
you may be charging or working with the 12V
starter battery. Always wear protective clothing and goggles when
working with the 12V starter battery, or have a
skilled automobile technician do it. If you are quick-charging your 12V starter battery,
first disconnect the 12V starter battery cables. In order to prevent a short circuit, be sure to discon-
nect the negative (-) terminal first, and reconnect it
last.If the electrolyte level is very low, have the 12V
starter battery checked at a certified i-MiEV dealer.12V starter battery terminals and related accesso-
ries contain lead and lead compounds. Wash hands
after handling.
CAUTION
!When replacing the 12V starter battery, remove the
connected positive (+) and negative (-) terminals
after turning the electric motor switch to the
“LOCK” position and waiting at least 1 minute. If
the 12V starter battery terminal is removed just
after the electric motor switch is turned to the
“LOCK” position, this may cause damage to compo-
nents of the electric motor unit.
BK0140800US.book 17 ページ 2011年9月29日 木曜日 午後3時28分
7-52 Vehicle care and maintenance
7Cleaning the outside of your vehicle
N00945700061
To protect your vehicle’s finish, wash it often and thoroughly.
If desired, you may wax your vehicle using a nonabrasive auto-
mobile wax. Foreign material
N00945800046
Industrial pollution, road tar, bird droppings, tree sap, insect
remains, sea water and other foreign matters can damage the
finish on your vehicle.
Generally, the longer any foreign material stays on the finish,
the worse the damage. Wash your vehicle as soon as possible
whenever the finish gets soiled.Wa s h i n g
N00945900627
Chemicals contained in the dirt and dust picked up from air,
rain, snow or road surfaces can damage the paint and body of
your vehicle if left on.
Frequent washing and waxing is the best way to protect your
vehicle from this damage.
Do not wash the vehicle in direct sunlight. Park the vehicle in
the shade and spray it with water to remove dust. Next, using
plenty of clean water and a car washing mitt or sponge, wash
the vehicle from top to bottom.
Use a mild car washing soap if necessary. Rinse thoroughly
and wipe dry with a chamois or soft cloth. After washing the
vehicle, carefully clean the joints and flanges of the doors,
hood, etc., where dirt is likely to remain.
WA R N I N G
!Do not wash the vehicle while charging the main
drive lithium-ion battery.
Doing so could cause a fire or an electric shock.Before washing the vehicle, make sure that the
charging lid and the inner lid are completely closed.
If the lid is open, the charging unit is exposed to
water, resulting in a fire or an electric shock.Do not pour water inside the electric motor unit
room. Doing so could cause a fire or an electric
shock.
CAUTION
!When washing the vehicle, turn the electric motor
switch to the “LOCK” position.Do not use a high pressure washing machine to clean
the underneath of the vehicle.
Doing so might cause the electric motor unit prob-
lem or malfunction.When washing the underside of your vehicle or the
wheels, wear a pair of gloves to protect your hands.Never spray or splash water on the electrical parts
in under the hood. This may damage them. Be care-
ful also when washing the underbody. Do not spray
water up under the hood.
BK0140800US.book 52 ページ 2011年9月29日 木曜日 午後3時28分
9
Specifications
Vehicle labeling . . . . . . . . . . . . . . . . . . . . . . . . . . .9- 2
Vehicle dimensions . . . . . . . . . . . . . . . . . . . . . . . .9- 6
Vehicle weights . . . . . . . . . . . . . . . . . . . . . . . . . . .9- 6
Charging system specifications . . . . . . . . . . . . . . .9- 7
Electric motor specifications . . . . . . . . . . . . . . . . .9- 8
12V starter battery . . . . . . . . . . . . . . . . . . . . . . . . .9- 8
Tires and wheels. . . . . . . . . . . . . . . . . . . . . . . . . . .9- 9
Refill capacities . . . . . . . . . . . . . . . . . . . . . . . . . . .9- 10
BK0140800US.book 1 ページ 2011年9月29日 木曜日 午後3時28分
Specifications
9-7
9 Charging system specifications
N01148500014
*: When using a genuine charging cable with control boxRegular charging system
Rated input voltage AC 240V (single phase) AC 120V (single phase)Rated input frequency 50 Hz/60 HzMaximum rated current 15 A 8 A*Maximum power consumption 3.3 kW 1.0 kW*Applicable standardsUL2594: Electric Vehicle Supply Equipment
UL62: Flexible Cords and Cable
UL2251: Plugs, Receptacles and Couplers for Electric Vehicle
SAE J1772: (R) SAE Electric Vehicle and Plug in Hybrid Electric
Vehicle Conductive Charge Coupler
CSA C22.2 No.107.1-01: General use power supplies
CSA C22.2 No.42-10: General use receptacles, attachment plugs,
and similar wiring devices
CSA C22.2 No.49-10: Flexible Cords and Cables
CSA C22.2 No.182.2-M1987: Industrial Locking Type, Special
Use Attachment Plugs, Receptacles and ConnectorsLeakage current sensitivity in
cable control box20 mA
Quick charging system
Applicable standards CHAdeMOMaximum input current 125 A
Common charging system
Enclosure typeCharge connector: Type 3s
Control box (CCID): Type 3
BK0140800US.book 7 ページ 2011年9月29日 木曜日 午後3時28分
Alphabetical index
1
A
Accessory (installation) 1-7
Acoustic vehicle alerting system (AVAS) 3-38
Active stability control 3-46
ASC indicator 3-48
ASC OFF indicator 3-48
ASC OFF switch 3-47
Skid control function 3-47
Traction control function 3-46
Air conditioning 5-6
Important air conditioning operating tips 5-17
Air purifier 5-18
Aluminum wheels 7-55
Antenna 5-40
Anti-lock braking system 3-41
Warning light 3-42
,3-43
ASC 3-46
ASC indicator 3-48
ASC OFF indicator 3-48
ASC OFF switch 3-47
Assist grip 3-131
Audio
AM/FM electronically tuned radio with CD player 5-18
Error codes 5-37
Handling of compact discs 5-38
Steering wheel audio remote control switch 5-34
B
Back up lights
Bulb capacity 7-36
Replacement 7-42
Ball joint, steering linkage seals and drive shaft boots 7-27
Battery
Disconnection and connection 7-16
During cold weather 7-15
Main drive lithium-ion battery 1-4
12V starter battery charging system warning light 3-74
Bluetooth
® 2.0 interface 3-91
Brake
Anti-lock braking system 3-41
Braking 4-8
Fluid 7-12,9-10
Hose 7-27
Parking brake 3-25
Parking brake lever stroke 7-25
Pedal 3-39
Pedal free play 7-25
Power brakes 3-39
Service brake 3-39
Warning light 3-73
Brake assist system 3-40
Break-in recommendations 3-2
Bulb capacity 7-36
BK0140800US.book 1 ページ 2011年9月29日 木曜日 午後3時28分
Alphabetical index
2
C
California Perchlorate Materials Requirements 1-9
Capacities 9-10
Card holder 3-123
,3-129
Cargo loads 4-13
Certification label 9-5
Charging
Quick charging 1-33
Regular charging 1-20
,1-32
Charging indicator 3-72
Charging Timer 1-48
Charging troubleshooting guide 1-38
Chassis number 9-3
Child restraint 2-23
Child safety locks for rear door 3-15
Cleaning
Inside of your vehicle 7-50
Outside of your vehicle 7-52
Clock 5-41
Cold
Cautions and actions to deal with intense cold 1-12
Combination headlights and dimmer switch 3-76
Consumer information 8-2
Coolant 7-7
,9-10
Cruising range 1-5
Cruising range indicator 3-61
,3-67
Cup holder 3-130
D
Dash lights brightness indicator 3-61
,3-66
Daytime running lights
Bulb capacity 7-36
Replacement 7-40
Defogger (rear window) 3-89
Dimensions 9-6
Dimmer (high/low beam change) 3-81
Dinghy towing 4-14
Disc brake pads 7-27
Dome light (Front)/Reading lights
Bulb capacity 7-37
Switch 3-125
Dome light (Rear)
Bulb capacity 7-37
Switch 3-127
Door-ajar warning light and buzzer 3-74
Doors
Lock 3-12
Power door locks 3-14
Driver’s seat belt reminder/warning light 2-17
Driving during cold weather 4-7
Driving, alcohol and drugs 4-3
E
Economical driving 4-2
Electric motor
Number 9-4
BK0140800US.book 2 ページ 2011年9月29日 木曜日 午後3時28分