2012 MITSUBISHI ECLIPSE key battery

[x] Cancel search: key battery

Page 22 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual Quick index
7
If this problem occurs...
N00200900678
Problem
Do this
Ref. Page
Cannot turn the key.
From “LOCK” to “ACC”Turn the key while jogging the steering wheel in either direction.From

Page 105 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual 3-10 Features and controls
3
NOTEThe indicator light (5) comes on each time a switch is
pressed.
The keyless entry system does not work if the key is in the
ignition. 
The remote control transmitte

Page 107 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual 3-12 Features and controls
3
4. Install a new battery with the + side (A) down.
5. Close the remote control transmitter firmly.
6. Place the remote control transmitter in the remote control
transmitte

Page 114 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual Features and controls
3-19
3
3. Push out on the rear hatch to open it.ECLIPSE SPYDERThe inside trunk lid key cylinder provides a way to open the
trunk lid in the case of a discharged battery.
1. Make

Page 119 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual 3-24 Features and controls
3
Alarm stage
N00510400060
The alarm will be activated if any of the following occur while
the vehicle is parked and the system is armed.
1. One of the doors and the rear ha

Page 121 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual 3-26 Features and controls
3Power windows
N00510800338
In an ECLIPSE SPYDER, operating a power window switch
causes the door window and quarter window to move together.
However, within about 4 inches

Page 125 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual 3-30 Features and controls
3
NOTEWhen leaving the vehicle unattended, be sure to close the
sunroof and remove the ignition key.
Do not try to operate the sunroof if it is frozen closed
(after snowfa

Page 157 of 494

MITSUBISHI ECLIPSE 2012 4.G Owners Manual 3-62 Features and controls
3
For vehicles with an automatic transaxle, when removing the
key, first set the selector lever to the “P” (PARK) position, and
then turn the key to the “LOCK” posit
Page:   1-8 9-16 17-24 next >