2012 MERCEDES-BENZ S-CLASS SEDAN brake

[x] Cancel search: brake

Page 342 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual XBriefly pull the cruise control lever towards
you  ?, or briefly press up  : or down  ;.
DISTRONIC PLUS is selected.XPress the cruise control lever up  : or
down  ; repeatedly until the desired speed

Page 343 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual If these conditions are fulfilled, your vehicle
is accelerated. Acceleration will be
interrupted if changing lanes takes too long
or if the distance between your vehicle and
the vehicle in front becom

Page 345 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual iFor design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
If DISTRONIC PLUS detects a vehicle in front,
the speedometer dial lights up betw

Page 346 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual When you deactivate DISTRONIC PLUS, the
DISTRONIC PLUS Off  message is shown in
the multifunction display for approximately
five seconds.
i The last speed stored remains stored until
you switch off th

Page 347 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual The ability of DISTRONIC PLUS to detect
vehicles when cornering is limited. Your
vehicle may brake unexpectedly or late.
Vehicles traveling on a different line
DISTRONIC PLUS may not detect vehicles
t

Page 348 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R when pulling away, especially on steep
slopes
R when maneuvering on steep slopes
R when waiting in tr

Page 352 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual The ABC Active Body Control 
COMFORT  message appears in the
multifunction display.
4MATIC (permanent four-wheel drive)
4MATIC ensures that all four wheels are
permanently driven. Together with ESP ®

Page 353 of 536

MERCEDES-BENZ S-CLASS SEDAN 2012  Owners Manual Range of the sensors
General notes
The sensors must be free of dirt, ice and
slush. Otherwise, they may not function
correctly. Clean the sensors regularly, taking
care not to scratch or damage them
(