Program
mingtheintegrat edgarage
door opener onthe rear -view mirror Program
ming G
WARNING Only
press thetransm itterbutton onthe
integrated garagedooropener ifthere areno
persons orobject spresent withinthesweep
of the garage door.People couldotherwise be
injured bythe movement ofthe door. Int
egrated garagedooropener onthe rear-view
mirror
Garage doorremote controlA isnot part of
this integrat edgarage dooropener. i
To
achieve thebest result, insertnew
batteries ingarage doorremote control
A before programming.
X Before programming forthe first time, clear
the memory ofthe integrat edgarage door
opener (Ypage 308).
X Turn theSmartK eytoposition 2in the
ignition lock.
X Press andhold oneoftransm itter
buttons ;to? onthe integrat edgarage
door opener.
Indicator lamp:starts toflash yellow
after ashort period. i
Indicator
lamp:flashes yellow
immediately afterthetransm itterbutton
has been stored forthe first time. Ifthe
transm itterbutton hasalready been
programmed, indicatorlamp:does not
flash yellow until10seconds haveelapsed. X
Relea sethe transm itterbutton.
X Point transm itterbutton Bofgarage door
remote controlA towards thetransm itter
buttons onthe rear-view mirrorata
distance of2to 8inches (5to 20 cm). i
The
distance requiredbetween garage
door remote controlA and theintegrated
garage dooropener depends onthe system
of the garage doordrive. Youmight require
several attempt s.You should testevery
position foratleast 25seconds before
trying another position.
X Press andhold transm itterbutton Bon
garage doorremote controlA until
indicator lamp:lights upgreen.
Programming iscomplete ifindicator
lamp :lights uporflashes green.
X Relea setransm itterbutton ;,=or? on
the integrat edgarage dooropener andthe
transm itterbutton ongarage doorremote
cont rolB.
If indicator lamp:lights upred:
X Repea tthe programming procedureforthe
transmit terbutton. Whendoingso,vary the
distance between thegarage doorremote
cont roland therear-view mirror. i
If
the indicator lampflashes greenafter
successful programming, thegarage door
system isoperating onarolling code. After
programming, youmust synchron izethe
garage dooropener integratedinthe rear-
view mirror withthereceiver ofthe garage
door system.
Synchronizing therolling code
Your vehicle mustbewithin rangeofthe
garage orgate opener drive.Makesurethat
neither yourvehicle norany persons/ objects
are present withinthesweep ofthe door or
gate.
Observe thesafety noteswhen performin g
the rolling codesynchron ization. 306
Featur
esStowing and features
