2012 MERCEDES-BENZ G-Class air conditioning

1, 2, 3 ...
115 V socket ...................................... 197
12 V socket
........................................ 196
4ETS (Electronic Traction System) Function/notes ................................ 56
4MATIC (permanent four-wheel
drive) .................................................. 141A
ABS (Anti-lock Braking System) Display message ............................ 166
Function/notes

................................ 54
Warning lamp ................................. 181
Active service system
see Service interval display
Additives
Engine oil ....................................... 275
Adjusting the seat ............................... 76
Air bags Front air bag (driver, front
passenger) ....................................... 35
Important safety notes .................... 34
PASSENGER AIR BAG
OFF- indicator lamp .......................... 37
Safety guidelines ............................. 33
Window curtain air bag ....................37
Air-conditioning system
see Climate control
Air pressure
see Tire pressure
Air vents ............................................. 111
Important safety notes .................. 110
Rear ............................................... 111
Setting ........................................... 110
Setting the center air vents ...........111
Setting the side air vents ............... 111
Alarm system
see ATA
Anti-lock Braking System
see ABS
Anti-Theft Alarm system
see ATA
Approach/departure angle ..............138
Ashtray ............................................... 195ATA (Anti-Theft Alarm system)
Activating/deactivating

...................57
Function ........................................... 57
Switching off the alarm .................... 57
Authorized Mercedes-Benz Center
see Qualified specialist workshop
AUTO lights
Display message ............................ 168
Automatic car wash .......................... 217
Automatic transmission Driving tips .................................... 121
Emergency running mode ..............124
Important safety notes .................. 119
Kickdown ....................................... 121
Malfunction .................................... 124
Pulling away ................................... 116
Releasing the parking lock
manually ........................................ 124
Selector lever ................................ 120
Automatic transmission
emergency mode ............................... 124 B
Backup lamp Display message
............................ 170
BAS (Brake Assist System)

.................54
Battery Charging ........................................ 231
Checking (SmartKey) ....................... 62
Display message ............................ 172
Important safety guidelines
(SmartKey) ....................................... 62
Important safety notes .................. 230
Jump-starting ................................. 233
Replacing (SmartKey) ...................... 62
Belt
see Seat belts
Brake fluid
Display message ............................ 166
Notes ............................................. 275
Brake fluid level ................................ 215
Brake lamps (display message) .......168
Brakes ABS .................................................. 54
BAS .................................................. 54
Brake fluid (notes) .........................275
Display messages ..........................1664
Index

S
Safety Children in the vehicle .....................47
Child restraint systems ....................47
Overview of occupant safety
systems ...........................................
32
Safety systems
see Driving safety systems


Seat backrest
Folding back .................................. 191
Folding forwards ............................ 191
Seat belts
Adjusting the height ......................... 45
Belt force limiters ............................ 47
Cleaning ......................................... 222
Correct usage .................................. 42
Emergency Tensioning Devices ........ 47
Fastening ................................... 43, 44
Fastening, front ............................... 44
Fastening in the rear, center ............44
Important safety guidelines .............41
Releasing ......................................... 46
Safety guidelines ............................. 33
Special seat belt retractor ............... 49
Warning lamp ................................. 178
Warning lamp (function) ................... 46
Seat heating
Indicator lamp (malfunction) ............ 81
Seats
Adjusting the 4-way lumbar
support ............................................ 79
Adjusting the head restraint ............ 77
Cleaning the cover ......................... 221
Correct driver's seat position ........... 74
Important safety notes .................... 75
Multicontour seat ............................ 79
Storing settings (memory
function) .......................................... 85
Switching seat heating on/off ......... 80
Switching seat ventilation on/off ....81
Seat ventilation
Indicator lamp (malfunction) ............ 81
Sensors (cleaning instructions) .......220
Service indicator see Service interval display Service interval display
....................215
Displaying a
service message (on-
board computer) ............................ 216
Service products
Brake fluid ..................................... 275
Capacities ...................................... 273
Coolant (engine) ............................ 276
Engine oil ....................................... 275
Fuel ................................................ 273
Important safety notes .................. 272
Notes ............................................. 272
Refrigerant (air-conditioning
system) .......................................... 275
Washer fluid ................................... 277
Settings
Calling up a stored setting ............... 86
Factory (on-board computer) ......... 158
On-board computer ....................... 158
Setting the unit (on-board
computer)
Speedometer ................................. 159
Shift ranges ....................................... 121
Side marker lamp (display
message) ............................................ 169
Side windows Convenience closing feature ............ 69
Convenience opening feature .......... 69
Important safety information ........... 68
Opening/closing .............................. 68
Troubleshooting ............................... 69
Ski rack .............................................. 193
Sliding sunroof Important safety notes .................... 70
Opening/closing .............................. 70
Operating manually ..........................71
SmartKey
Changing the battery ....................... 62
Changing the programming ............. 61
Checking the battery ....................... 62
Convenience closing feature ............ 69
Convenience opening feature .......... 69
Important safety notes .................... 60
Loss ................................................. 64
Malfunction ...................................... 64
Starting the engine ........................ 116
Snow chains ...................................... 24512
Index

Activating/deactivating air-
recirculation mode
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated. G
WARNING
Fogged windows impair visibility,
endangering you and others. If the windows
begin to fog on the inside, switching off the
air recirculation mode immediately should
clear interior window fogging. If interior
window fogging persists, make sure the air
conditioning is activated, or press button
z or ¥.
X Turn the SmartKey to position 2 in the
ignition lock.
X To switch on: press the g button.
The indicator

lamp in the g button lights
up.
i Air-recirculation mode is activated
automatically at high outside
temperatures. When

air-recirculation mode
is activated automatically, the indicator
lamp in the g button is not lit.
Outside air is added after about 30
minutes.
X To switch off: press the g button.
The indicator

lamp in the g button goes
out.
i Air-recirculation mode switches off
automatically:
R after approximately five minutes if
outside temperatures

are less than about
41 ‡ (5 †)
R after approximately five minutes if
cooling with air dehumidification is
deactivated
R after approximately 30 minutes if outside
temperatures are over about
41 ‡ (5 †) Activating/deactivating the residual
heat function
It is

possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes after
the engine has been switched off. The heating
time depends on the coolant temperature and
on the interior temperature that has been set.
i The blower will run at a low speed
regardless of the airflow setting.
i If you activate the residual heat function
at high temperatures, only the ventilation
will be activated.
X Turn the SmartKey to position 0 in the
ignition lock or remove it.
X To activate: press the Á button.
The indicator

lamp in the Á button lights
up.
X To switch off: press the Á button.
The indicator

lamp in the Á button goes
out.
i Residual heat is deactivated
automatically:
R after about 30 minutes
R when the ignition is switched on
R if the battery voltage drops
R if the coolant temperature is too low Setting the air vents
Important safety notes
G
WARNING
When operating the climate control, the air
that enters the passenger compartment
through the air vents can be very hot or very
cold (depending

on the set temperature). This
could cause burns or frostbite to unprotected
skin in the immediate area of the air vents.
Always keep sufficient distance between
unprotected parts of the body and the air
vents. If necessary, use the air distribution 110
Setting the air vents
Climate control

For this reason, in the event of heavy rain or
in conditions in which hydroplaning can
occur, you must drive in the following
manner:
R
lower your speed.
R avoid ruts.
R brake carefully.
Driving on flooded roads !
Do not drive through flooded areas.
Check the
depth of any water before driving
through it. Drive slowly through standing
water. Otherwise, water may enter the
vehicle interior or the engine compartment.
This can damage the electronic
components in the engine or the automatic
transmission. Water can also be drawn in
by the engine's air suction nozzles and this
can cause engine damage.
If you have to drive on stretches of road on
which water has collected, please bear in
mind that:
R the maximum permissible still water depth
is 50 cm.
R you should drive no faster than at walking
pace.
Off-road fording :
Fording depth, 20 in (50 cm)
The fording depth must not exceed 20 in
(50 cm)

when the vehicle is loaded and ready
to drive. !
The water depth must not exceed 20 in
(50 cm). Note that the possible fording
depth is less in flowing water.
i You may only drive through freshwater.
R Observe the

safety notes (Y page 134) and
the general notes (Y page 135) on off-road
driving.
R Establish how deep the water is and the
characteristics of the body of water before
fording.
R Switch off the auxiliary heating and the air-
conditioning system.
R Shift the transfer case to
LOW (Y page 145).
R Engage the differential locks, if necessary
(Y page 148).
R Restrict the shift range to 1 or 2
(Y page 121).
R Avoid high engine speeds.
R Enter and exit the water at a flat place and
at a steady walking pace.
! Under no circumstances should you
accelerate before entering the water. The
bow wave could cause water to enter and
damage the engine and other assemblies.
R Drive slowly and at an even speed through
the water.
R Do not stop and do not switch off the
engine.
! Do not open any of the vehicle's doors
while fording. Otherwise, water could get
into the vehicle interior and damage the
vehicle's electronics and interior
equipment.
R Water offers a high degree of resistance,
and the ground is slippery and in some
cases unstable. Therefore, it is difficult and
dangerous to pull away in the water.
R Ensure that a bow wave does not form as
you drive.
R Clean any mud from the tire tread after
fording.
R Apply the brakes to dry them after fording. Driving tips
133
Driving and parking Z

Increased vehicle weight due to
optional equipment
This is the combined weight of all standard
and optional equipment available for the
vehicle, regardless of whether it is actually
installed on the vehicle or not. Wheel rim
This is
the part of the wheel on which the tire
is mounted. GAWR (Gross Axle Weight Rating)
The GAWR

is the maximum gross axle weight
rating. The actual load on an axle must never
exceed the gross axle weight rating. The
gross axle weight rating can be found on the
vehicle identification plate on the B-pillar on
the driver's side. Speed index
The speed index is part of the tire
identification. It

specifies the speed range for
which the tire is approved. GTW (Gross Trailer Weight)
The GTW is the sum of the weight of a trailer
and the weight of the load, luggage,
accessories etc. on the trailer. GVW (Gross Vehicle Weight)
The gross vehicle weight includes the weight
of the vehicle including fuel, tools, the spare
wheel, accessories installed, occupants,
luggage and the drawbar noseweight if
applicable. The

gross vehicle weight must not
exceed the gross vehicle weight rating GVWR
as specified on the vehicle identification plate
on the B-pillar on the driver's side. GVWR (Gross Vehicle Weight Rating)
The GVWR is the maximum permitted gross
weight of

the fully laden vehicle (weight of the
vehicle including all accessories, occupants,
fuel, luggage and the drawbar noseweight if
applicable). The gross vehicle weight rating is
specified on the vehicle identification plate on
the B-pillar on the driver's side. Maximum
weight of the laden vehicle
The maximum weight is the sum of the curb
weight of the vehicle, the weight of the
accessories, the maximum load and the
weight of

the optional equipment installed at
the factory. Kilopascal (kPa)
Metric unit for tire pressure. 6.9 kPa is the
equivalent of 1 psi

. Another unit for tire
pressure is bar. 100 kilopascal (kPa) is the
equivalent of 1 bar. Load index
In addition

to the load bearing index, the load
index may also be imprinted on the sidewall
of the tire. This specifies the load bearing
capacity more precisely. Curb weight
The weight of a vehicle with standard
equipment, including the maximum capacity
of fuel, oil and coolant and also includes the
air-conditioning system and optional
equipment if these are installed on the
vehicle, but does not include passengers or
luggage. Definition of terms for tires and loading
263Wheels and tires Z

Engine oil
Please bear the following in mind The engine oils are matched to the
performance of Mercedes-Benz engines and
service intervals. For this reason, only use
engine
oils
and oil filters that are approved for
vehicles with a service system.
For a list of approved engine oils and oil filters,
consult an authorized Mercedes-Benz Center
or go to the Internet site
http://bevo.mercedes-benz.com (USA
only).
! Never use engine oil or an oil filter of a
specification other than is necessary to
fulfill the prescribed service intervals. Do
not change the engine oil or oil filter in
order to achieve longer replacement
intervals than those prescribed. You could
otherwise cause engine damage or damage
to the exhaust gas aftertreatment.
Follow the instructions in the service
interval display regarding the oil change.
Otherwise, you may damage the engine and
the exhaust gas aftertreatment.
The table shows which engine oils have been
approved for your vehicle. Model Engine
model MB
Approval
G 550 273 229.5
G 55 AMG 113 229.5
i
MB approval is indicated on the oil
containers.
Additives !
Do not

use any additives in the engine oil.
This could damage the engine.
Engine oil viscosity Viscosity describes the flow characteristics
of
a

fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity
means that it is thin.
Select an engine oil with an SAE (viscosity)
classification suitable for the prevailing
outside temperatures. The following table
shows the correct SAE classification to be
used.
The

low-temperature characteristics of
engine oils can deteriorate significantly, e.g.
as a result of aging, soot and fuel deposits. It
is therefore strongly recommended that you
carry out regular oil changes using an
approved engine oil with the appropriate SAE
classification. Refrigerant of the air-conditioning
system
The air-conditioning system is filled with
R134a (HFC) refrigerant and a special PAG
lubricant.
! Never use refrigerant R 12 (CFC) or
mineral lubricants. Otherwise, you could
damage the air-conditioning system. Brake fluid
G
WARNING
The brake fluid constantly absorbs moisture
from the air; this lowers its boiling point.
If the

boiling point of the brake fluid is too low,
vapor pockets may form in the brake system
when the brakes are applied hard (e.g. when
driving downhill). This would impair braking
efficiency. Service products and capacities
275
Technical data
Z