2012 MERCEDES-BENZ G-Class warning

[x] Cancel search: warning

Page 193 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual For safety reasons, the rear seat bench must
only be adjusted when the vehicle is
stationary.
Never drive a vehicle with the tailgate open.
Deadly carbon monoxide (CO) gases may
enter vehicle interior

Page 194 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual being thrown forwards from the cargo
compartment.
Securing cargo
Important safety notes G
WARNING
Distribute  the load on the cargo tie down rings
evenly.
Otherwise, vehicle occupants could be
injured

Page 195 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual Installing/removing the cargo
compartment cover
X
 To remove: make sure that cargo
compartment cover  ; is rolled up.
X Slide catches  : 
on  the left-hand and right-
hand sides of cargo compartment
c

Page 196 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual ! 
Make sure that the cup holder on the
center console is folded down before you
move the front-passenger seat forwards.
Cup holder on the armrest X
Insert cup holder : as shown with the
arrow into th

Page 197 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual Ashtray
Ashtray in the cockpit X
To open:  press cover ? and then release
it.
Ashtray : folds out.
X To remove insert: make sure that the
vehicle is secured against rolling away by
applying the parkin

Page 199 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual X
Lift up the cover of the socket. 115 V socket
G
WARNING
The 115V AC socket operates at high voltage.
Use the 115V AC socket in the vehicle with
the same caution and prudence that you
exercise when u

Page 201 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual G
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
R the indicator lamp in the SOS button does
not light up during the system self-
diagnosis.
R the ind

Page 202 of 284

MERCEDES-BENZ G-Class 2012 W463 Owners Manual established, then the mbrace system could
not initiate an emergency call (e.g. the
relevant cellular phone network is not
available).
The message 
Call Failed  appears in the
multifunction display for