2012 MERCEDES-BENZ CL-Class oil pressure

[x] Cancel search: oil pressure

Page 6 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual 1, 2, 3 ...
12 V socket see Sockets                                              
4ETS
see ETS/4ETS (Electronic
Traction System)                                       
4MATIC (permanent four-wheel
dri

Page 24 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual MB info call button ........................398
Remote vehicle locking  ..................401
Roadside Assistance button  ..........397
Search & Send  ............................... 400
Self-test  ..

Page 335 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual Menus and submenus
Menu overview
The number of menus shown depends on the optional equipment in the vehicle.
Function:Trip  menu ( Y page 334);Navi  menu (navigation instructions) ( Y page 335)=Audio

Page 345 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual When ATTENTION ASSIST (Y page 316) is
activated, the  À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Active Blind
Spot Assist
You can use the  Blind Sp

Page 367 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual ! The oil level is too low. Avoid long journeys with too little engine oil. There is a risk of
engine damage.
The display messages and the corresponding symbol that indicate that the oil level is too

Page 413 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual Specifications for Service Products can be
called up by visiting  http://
www.mbusa.com  (USA only). More
information about tested and approved
engine oils and oil filters is available from
any author

Page 466 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual Kilopascal (kPa)
Metric unit for tire pressure. 6.9 kPa is the
equivalent of 1 psi. Another unit for tire
pressure is bar. There are 100 kilopascals
(kPa) to 1 bar.
Load index
In addition to the load

Page 468 of 488

MERCEDES-BENZ CL-Class 2012 C216 Owners Manual ! On vehicles equipped with a tire pressure
monitor, electronic components are
located in the wheel.
Tire-mounting tools should not be used
near the valve. This could damage the
electronic components.
Page:   1-8 9-16 next >