Basic Warranty This warranty covers repairs and
adjustments needed to correct
defects in materials or workman -
ship of any part supplied by Lexus,
subject to the exceptions indicated
under “What Is Not Covered” on
pages 19–20.
Coverage is for 48 months or
50,000 miles, whichever occurs
first, with the exception of wheel
alignment and wheel balancing,
which are covered for 12 months
or 12,000 miles, whichever
occurs first.
Powertrain Warranty This warranty covers repairs needed
to correct defects in materials or
workmanship of any component listed
here and supplied by Lexus, subject to
the exceptions indicated under “What
Is Not Covered” on pages 19–20.
Coverage is for 72 months or
70,000 miles, whichever occurs first.
Engine
Cylinder block and head and all
internal parts, timing belt and cover,
flywheel, oil pan, water pump, fuel
pump, engine mounts, engine control
computer, seals and gaskets. Transmission and Transaxle
Case and all internal parts, torque
converter, clutch cover, mounts,
engine control computer, seals
and gaskets.
Front-Wheel-Drive System
Drive shaft, axle, hub, bearings,
seals and gaskets.
Rear-Wheel-Drive System
Differential carrier assembly, drive
shaft, axle carrier, axle case, axle
bearing, axle shaft, seals and gaskets.
Restraint Systems Warranty This warranty covers repairs needed
to correct defects in materials or
workmanship of any seatbelt or air bag
system supplied by Lexus, subject to
the exceptions indicated under “What
Is Not Covered” on pages 19–20.
Coverage is for 72 months or
70,000 miles, whichever occurs first.
For vehicles sold and registered in
Kansas, the warranty for seatbelts
and related components is 10 years,
regardless of mileage.WHAT IS COVERED
AND HOW LONG
Your Warranties in Detail18 Ne W v eh I c L e L IMI ted W A rr AN t Y
WARRANTY
e xplanation of Maintenance i te MS
MAINTENANCE
Scheduled Maintenance Log 71Exhaust Pipes and Mountings
Visually inspect the exhaust pipes,
muffler and hangers for cracks,
deterioration and damage. Start
the engine and listen carefully for
any exhaust leakage. Tighten connec -
tions and replace parts as necessary.
Fuel Lines and Connections, Fuel
Tank Band and Fuel Tank Vapor
Vent System Hoses
Visually inspect for corrosion,
damage, cracks, and loose or leaking
connections. Tighten connections
and replace parts as necessary.
Fuel Tank Cap Gasket
Visually inspect for cracks, deterio -
ra tion and damage and replace
if necessary.
Nuts and Bolts on Chassis
Check that tightness of the seat-
mounting bolts and front/rear
suspension-member retaining bolts
matches torque measurements
specified in the Repair Manual .
Rack-and-Pinion Assembly
Inspect the rack-and-pinion assembly
for signs of leakage, damage and
loose electrical connections. Tighten
connections and if you discover any
leakage or damage, have it repaired
immediately by a qualified technician. Road Test
While driving the vehicle, check for
proper operation of engine, transmis -
sion, brakes and steering. Also check
the parking brake, and check for
abnormal noise or vibration from
any part of the vehicle.
Spark Plugs
Replace at specified interval. Install
new plugs of the same type as origi -
nally equipped (see your Owner’s
Manual ). A qualified technician
should perform this operation.
t o ensure optimum engine perfor -
mance, replace only with d enso
f K20 h R11 plugs or equivalent.
Steering Linkage and Boots
With the vehicle stopped, check for
excessive freeplay in the steering
wheel. Inspect the linkage for bend -
ing and damage and the dust boots
for deterioration, cracks and damage.
Replace any damaged parts. A
qualified technician should perform
these operations.
