Page 216 of 420
214
3-5. Other interior features
Power outlet
The power outlet can be used for 12 V accessories that run on less than 10 A.
Open the glove box. (P. 210)
Open the lid.STEP1
STEP2
■The power outlet can be used when
The ignition switch is in the “ACC” or “ON” position.
NOTICE
■To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter th e power outlet may cause a short circuit.
■To prevent blown fuses
Do not use an accessory that uses more than 12 V 10 A.
■To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not running.
Page 224 of 420

222
3-5. Other interior features
Safety Connect LED light IndicatorsWhen the ignition switch is turned to the “ON” position, the red indicator
light comes on for 2 seconds then tu rns off. Afterward, the green indica-
tor light comes on, indicating that the service is active.
The following indicator light patterns indicate specific system usage con-
ditions:
● Green indicator light on = Active service
● Green indicator light flashing = Safety Connect call in process
● Red indicator light (except at vehicle start-up) = System malfunction
(contact your Lexus dealer)
● No indicator light (off) = Saf ety Connect service not active
Safety Connect services
■ Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the
system is designed to automatically call the response center. The
responding agent receives the vehicl e’s location and attempts to speak
with the vehicle occupants to asse ss the level of emergency. If the
occupants are unable to communicate, the agent automatically treats
the call as an emergency, contacts the nearest emergency services
provider to describe the situation, and requests that assistance be sent
to the location.
Page 251 of 420

249
4-3. Do-it-yourself maintenance
4
Maintenance and care
CAUTION
The engine compartment contains many mechanisms and fluids that may move sud-
denly, become hot, or become electrically energized. To avoid death or serious injury,
observe the following precautions:
■When working on the engine compartment
●Keep hands, clothing, and tools away from the moving fan and engine drive belt.
●Be careful not to touch the engine, exhaust manifold, etc. right after driving as
they may be hot. Oil and other fluids may also be hot.
●Do not leave anything that may burn easily, such as paper or rags, in the engine
compartment.
●Do not smoke, cause sparks or expose an open flame to fuel. Fuel fumes are flam-
mable.
■When working near the electric cooling fan
Be sure the ignition switch is in the “LOCK” position.
With the ignition on, the electric cooling fan may automatically start to run if the air
conditioning is on. ( P. 2 6 1 )
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting
in the eyes.
NOTICE
■If you remove the air cleaner filters
Driving with the air cleaner filters remo ved may cause excessive engine wear due
to dirt in the air. Also a backfire could cause a fire in the engine compartment.
Page 254 of 420

252
4-3. Do-it-yourself maintenance
CAUTION
■Preventing personal injury
●Turn the ignition switch to the “LOCK” position and wait for a while before open-
ing the hood so as to avoid getting caught in the moving parts of the engine. Fail-
ure to do so may result in serious injury or death.
■When closing the hood
NOTICE
■When closing the hood
●Do not apply excessive weight or force when closing the hood as doing so may
result in damage.
●Be sure that the supporting rod is firmly secured with the clip positioned on the
inside of the hood. Closing the hood with out securing the supporting rod to the
clip may result in damage to the hood , supporting rod or components in the
engine compartment.
●Do not touch the hood grille or compo-
nents in the engine compartment immedi-
ately after the engine has been driven as
doing so may result in serious injuries such
as burns.
Be careful not to get hands or other body
parts caught when closing the hood as doing
so may result in serious injury.
Page 268 of 420

266
4-3. Do-it-yourself maintenance
■Before recharging
When recharging, the battery produces hydrogen gas which is flammable and
explosive. Therefore, observe the following precautions before recharging:
●If recharging with the battery installed on the vehicle, be sure to disconnect the
ground cable.
●Make sure the power switch on the charger is off when connecting and discon-
necting the charger cables to the battery.
■If the vehicle is not used for an extended period of time
Removing the specified fuse helps to supp ress parasitic current (the draw on the
battery when the vehicle is shut off).
Turn the ignition switch to the “LOCK” position.
Open the fuse box lid in the engine compartment. ( P. 2 8 7 )
Before commencing driving again, make sure to return the fuse to its original posi-
tion.
STEP1
STEP2
While referring to “Fuse layout and amper-
age ratings” ( P. 290) or the back of the
fuse box lid for the location, use the pull-out
tool to remove the “D/C CUT” fuse
and put it into .
Make sure that the fuse is firmly inserted.STEP3
Page 269 of 420
267
4-3. Do-it-yourself maintenance
4
Maintenance and care
■Removing the negative (-) battery terminalTurn the ignition switch to the “LOC K” position and check that the gear
indicator is not displayed. ( P. 2 6 9 )
Open the rear hatch and remove the cover.
●When reconnecting the terminal, make sure that the lever is lowered into the
lock position.
●Do not disconnect the term inal while the power seats, power windows or other
electrical devices are being operated.
●When the battery terminal is disconnect ed, the “Lap Timer” data and clock in
the meter will be reset.
STEP1
STEP2
Lift the lever.
Disconnect the terminal.STEP3
Lock position
STEP4
Page 271 of 420

269
4-3. Do-it-yourself maintenance
4
Maintenance and care
CAUTION
■Emergency measures regarding electrolyte
●If electrolyte gets in your eyes
Flush your eyes with clean water for at least 15 minutes and get immediate medi-
cal attention. If possible, continue to apply water with a sponge or cloth while
traveling to the nearest medical facility.
●If electrolyte gets on your skin
Wash the affected area thoroughly. If you feel pain or burning, get medical atten-
tion immediately.
●If electrolyte gets on your clothes
It can soak through clothing on to your skin. Immediately take off the clothing and
follow the procedure above if necessary.
●If you accidentally swallow electrolyte
Drink a large quantity of water or milk. Fo llow with milk of magnesia, beaten raw
egg or vegetable oil. Get emergency medical attention immediately.
■When replacing the battery
Use a battery designed for the LFA. Failure to do so may cause gas (hydrogen) to
enter the passenger compartment, causing a fire or explosion.
For replacement of the battery, contact your Lexus dealer.
NOTICE
■Before disconnecting the battery terminal
Turn the ignition switch to the “LOCK” position and check that the gear indicator
turns off before disconnecting the battery terminal.
If the terminal is disconnected while the gear indicator is still displayed, the ASG
(Automated Sequential Gearbox) computer may be negatively affected, possibly
causing the engine not to start. If the term inal is accidentally disconnected while the
indicator is on, contact your Lexus dealer.
■When recharging the battery
Never recharge the battery while the engine is running. Also, be sure all accesso-
ries are turned off.
Page 273 of 420

271
4-3. Do-it-yourself maintenance
4
Maintenance and care
Initializing the tire pressure warning systemThe tire pressure warning system must be initialized when the tire infla-
tion pressure is changed (such as when changing traveling speed).
When the tire pressure warning system is initialized, the current tire infla-
tion pressure is set as the benchmark pressure.
■ How to initialize the tire pressure warning system
Park the vehicle in safe place and turn the ignition switch off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. ( P. 366)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
Turn the ignition switch to the “ON” position.
Press and hold the tire pressure
warning reset switch until the tire
pressure warning light flashes
slowly 3 times.
Wait for a few minutes with th e ignition switch in the “ON” posi-
tion and then turn the ignition switch off.
STEP1
STEP2
STEP3
STEP4
STEP5