2012 Lexus LFA instrument cluster

146
2-2. Instrument cluster
■Displaying measurement results
Measurement results can be displayed when the “Lap Timer” function
is “OFF”. Results can also be disp layed when the “Lap Timer” function
is turned “ON” but not recording measurements.
Select “Past Times” and press right
on the control pad.
Lap time list, “Fastest Lap”, and
“Total” will be displayed.
Move through the lap time list by
pressing up and down on the con-
trol pad.
The lap time list displays the 20
most recent lap times.

147
2-2. Instrument cluster
2
When driving
“Brightness” (brightness control)The brightness of the meter, instrument panel lights and down light (while
tail lights are on) can be adjusted. Select “Brightness” and press right
on the control pad.
Adjust the brightness by pressing
up and down on the control pad.
STEP1
STEP2

148
2-2. Instrument cluster
“Settings”Settings for the meter display can be changed. (Settings cannot be
changed while the vehicle is in motion.) Select “Settings” and press right
on the control pad.
Select the desired setting and
press right on the control pad.
“Needle” (
P. 1 4 9 )
“Rev Peak” (
P. 150)
“Clock” (
P. 151)
“Shortcut” (
P. 153)
“Units” (
P. 1 5 4 )
“Temp” (
P. 1 5 4 )
“Language” (
P. 155)
STEP1
STEP2

149
2-2. Instrument cluster
2
When driving
■“Needle”
Each time right on the control pad
is pressed, the color of the
tachometer needle will change as
follows:

150
2-2. Instrument cluster
■“Rev Peak”
When the engine speed reaches
or exceeds 6000 rpm, an afterim-
age of the tachometer needle will
be displayed at the highest engine
speed for approximately 0.5 sec-
onds.
Set up procedure Press the right side of the control
pad to turn this function “ON” or
“OFF”
The afterimage color of the
tachometer needle changes as fol-
lows:
Tachometer
needle colorAfterimage color
Blue Red Red Blue
White Blue

151
2-2. Instrument cluster
2
When driving
■“Clock”
The displayed time can be adjusted and shown in 12-hour (12H) or 24-
hour (24H) mode.
Select “Clock” and press right on
the control pad.
Selecting 12H or 24H mode Press up or down on the control
pad to switch between 12H and
24H mode.
When 12H mode is selected, “AM”
or “PM” will be displayed.
Pressing right on the control pad
moves the cursor to the hour
adjustment menu.

152
2-2. Instrument cluster
Clock adjustmentHour adjustment
Minute adjustmentPress right on the control
pad to move the cursor to
the hour adjustment menu.
Press up or down on the
control pad to adjust the
hour.
Press right on the control
pad to move the cursor to
the minute adjustment
menu.
Press up or down on the
control pad to adjust the
minute.
Pressing right on the control
pad moves the cursor to the
12H/24H mode adjustment
menu.
STEP1
STEP2
STEP3
STEP4

153
2-2. Instrument cluster
2
When driving
■“Shortcut”
Enables a quick jump to a preset scr een when left on the control pad is
pressed in the normal display.
Select “Shortcut” and press right
on the control pad.
Select the desired item and press
left on the control pad.
The selected item will be set as a
shortcut.
STEP1
STEP2