2012 Lexus LFA instrument cluster

138
2-2. Instrument cluster
■“Oil Maintenance” (engine oil maintenance)
This system calculates engine oil replacement timing and reminds the
driver when it is time to replace th e oil. Resetting operation should be
performed at your Lexus dealer when you have them change the
engine oil. (This procedure cannot be performed while the vehicle is in
motion.)
Select “Oil Maintenance” and
press right on the control pad.
Press and hold right on the control
pad for 5 seconds.
STEP1
STEP2

139
2-2. Instrument cluster
2
When driving
“Complete” will be displayed when
the reset procedure has been
completed.
The system will start measuring the
distance to the next engine oil
replacement timing.
STEP3

140
2-2. Instrument cluster
■“Tire Pressure” (tire inflation pressure)
Select “Tire Pressure” and press
right on the control pad.
The tire inflation pressure for each
tire is displayed.
If bars instead of a numeric value
are displayed, the tire pressure
warning system is not receiving tire
inflation pressure data from a
transmitter. Follow the same proce-
dure again after waiting a few min-
utes.
If the bars are still displayed, there
may be a malfunction with the tire
pressure warning system. Have the
vehicle inspected by your Lexus
dealer.
STEP1
STEP2

141
2-2. Instrument cluster
2
When driving
If one or more tires are insufficiently inflatedIf a tire is insufficiently inflated, an
amber frame will be shown.
The display does not specify the
location of the insufficiently inflated
tire. Adjust all the tires to the speci-
fied inflation pressure.
(  P. 2 7 8 366)
If a tire is noticeably deflated, it may
be punctured. Temporarily repair
the tire using the emergency tire
puncture repair kit. ( P. 3 3 2 )

142
2-2. Instrument cluster
“Lap Timer”Measures lap time and displays previous lap times.
■ Lap time display
The following times can be dis-
played.
Stopwatch
The current measurement time is
shown.
Lap time list
During “Lap Times” display:
The 4 most recent lap times are
shown.
During “Past Times” display:
The 20 most recent lap times are
shown.
Fastest lap
Displays the fastest lap time
recorded since the last reset.
Total time
Displays the total lap time since the
last reset.

143
2-2. Instrument cluster
2
When driving
■Operation
Press up and down on the control pad.
Start (“ Start”)/stop (“ Stop”)
measurement
Press: Mark off one lap
(“ Lap”)
Press and hold: Reset
(“ Reset”)
Resetting erases all measurement
results.
■Measurement method
Select “Lap Timer” and press right
on the control pad.
STEP1

144
2-2. Instrument cluster
Select “Lap Timer” and press right
on the control pad.
The “Lap Timer” function will be
turned “ON” and the trip informa-
tion/odometer will be changed to
stopwatch mode.
Select “Lap Times” and press right
on the control pad.
Lap time list, “Fastest Lap”, and
“Total” will be displayed. “ Start”
and “ Reset” will be shown on the
stopwatch display.
STEP2
STEP3

145
2-2. Instrument cluster
2
When driving
Press up on the control pad
(“ Start”) to begin measurement.●To measure lap times:
Press down on the control pad
(“ Lap”) during measurement
to mark off a lap. The lap time
will be added to the lap time list.
(The most recent lap will be dis-
played at the top of the lap time
list.)
The fastest lap time will also be
displayed as “Fastest Lap”.
● To stop measurement:
Press up on the control pad
(“ Stop”) during measurement.
When “ Stop” is selected, the
stopwatch time is not recorded
as a lap time.
When “ Start” is selected,
measurement resumes from the
stopwatch time shown.
STEP4