2012 Lexus LFA reset

118
2-2. Instrument cluster
Trip informationThe information on the trip infor-
mation display can be changed
when in the normal display by
pressing up or down on the control
pad.
■ Trip meter
■ Current fuel consumption
■ Average fuel consumption
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters “A” and “B” can be used to record
and display different distances indepen-
dently.
The function can be reset by pressing up or
down on the control pad for longer than
one second when the trip meter “A” or “B” is
displayed.
Displays the current rate of fuel consump-
tion.
Displays the average fuel consumption
since the function was reset.
The function can be reset by pressing up or
down on the control pad for longer than
one second when the average fuel con-
sumption is displayed.

119
2-2. Instrument cluster
2
When driving
■Average vehicle speed
■ Driving range
Displays the average vehicle speed since
the engine was started or the function was
reset.
The function can be reset by pressing up or
down on the control pad for longer than
one second when the average vehicle
speed is displayed.
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption. As a result, the
actual distance that can be driven may dif-
fer from that displayed.
When only a small amou nt of fuel is added
to the tank, the display may not be updated.
■Va r i a b l e r e d z o n e
■Engine coolant and engine oil temperature displays
In congested traffic, the engine coolant and engine oil displays may show a higher
than usual temperature. This is not a ma lfunction. If temperatures are abnormal,
these displays will flash.
To help protect the engine, the red zone of
the tachometer starts at different engine
speeds ranging from 4400 rpm to 9000
rpm depending on the engine coolant tem-
perature.

125
2-2. Instrument cluster
2
When driving
■Control pad
Press up, down, left and right on
the control pad to select and
change menu settings.
Pressing left changes the display as
follows:
Press: Returns to the previous
screen.
Press and hold: Returns to the nor-
mal display. (P. 116)
Brightness (
P. 1 4 7 ) Allows driver to adju
st the brightness of
the meter and interior illumination.
Settings
(  P. 1 4 8 ) Needle
Allows driver to change the needle
color for the tachometer.
Rev Peak Displays an afterimage of the tachome-
ter needle at th
e maximum engine
speed.
Clock Allows driver to adjust the displayed
time and choose between 12-hour (12H)
and 24-hour (24H) mode.
Shortcut Allows driver to jump to a preset display.
Units Changes units used to indicate distance,
speed and fuel consumption.
Te m p Changes the display temperature
between Fahrenheit and Celsius.
Language Changes the language displayed.
Wa r n i n g ( P. 322) Automatically displayed when a mal-
function occurs in one of the vehicle's
systems. (“Menu” is displayed when
there is no warning occurring.)
Menu itemFunction

134
2-2. Instrument cluster
Current fuel consumption
Displays the current rate of fuel
consumption.
Average fuel consumption
Displays the average fuel con-
sumption since the function was
reset.
This function can be reset from
the normal display. (P. 118)
Average vehicle speed
Displays the average vehicle
speed since the function was
reset.
This function can be reset from
the normal display. ( P. 1 1 9 )
Driving range
Displays the estimated maxi-
mum distance that can be
driven with the remaining fuel.
This distance is computed based
on your average fuel consump-
tion. As a result, the actual dis-
tance that can be driven may
differ from that displayed.
When only a small amount of
fuel is added to the tank, the dis-
play may not be updated.
STEP2

138
2-2. Instrument cluster
■“Oil Maintenance” (engine oil maintenance)
This system calculates engine oil replacement timing and reminds the
driver when it is time to replace th e oil. Resetting operation should be
performed at your Lexus dealer when you have them change the
engine oil. (This procedure cannot be performed while the vehicle is in
motion.)
Select “Oil Maintenance” and
press right on the control pad.
Press and hold right on the control
pad for 5 seconds.
STEP1
STEP2

139
2-2. Instrument cluster
2
When driving
“Complete” will be displayed when
the reset procedure has been
completed.
The system will start measuring the
distance to the next engine oil
replacement timing.
STEP3

142
2-2. Instrument cluster
“Lap Timer”Measures lap time and displays previous lap times.
■ Lap time display
The following times can be dis-
played.
Stopwatch
The current measurement time is
shown.
Lap time list
During “Lap Times” display:
The 4 most recent lap times are
shown.
During “Past Times” display:
The 20 most recent lap times are
shown.
Fastest lap
Displays the fastest lap time
recorded since the last reset.
Total time
Displays the total lap time since the
last reset.

143
2-2. Instrument cluster
2
When driving
■Operation
Press up and down on the control pad.
Start (“ Start”)/stop (“ Stop”)
measurement
Press: Mark off one lap
(“ Lap”)
Press and hold: Reset
(“ Reset”)
Resetting erases all measurement
results.
■Measurement method
Select “Lap Timer” and press right
on the control pad.
STEP1