12
Engine (Ignition) Switch
■Starting the engine
Make sure the parking brake is set and the shift
lever is in P.
Depress the brake pedal.The “ENGINE START STOP” switch indi-
cator light turns green.
Press the “ENGINE START STOP” switch.
■ Stopping the engine
Set the parking brake and shift the shift lever to P.
Press the “ENGINE START STOP” switch.
■Changing “ENGINE START STOP” switch modes
To change the “ENGINE START STOP” switch mode without turning on the engine, press
the “ENGINE START STOP” switch without depressing the brake pedal. The mode can be
changed in the following order:
With the electronic key on your person, the engine can be started by simply pressing the
“ENGINE START STOP” switch while depressing the brake pedal.
(The mechanical key cannot be used to start the engine.)
ACCESSORY mode IGNITION ON mode
(Indicator light: amber)
OFF
(Indicator light: off)
What to do if ...
69
List of Warning/Indicator Lights
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
(U.S.A.)
(Canada)Brake system warning light
Stop the vehicle immediately.
Charging system warning light
Have the vehicle inspected immediately.
(U.S.A.)
(Canada)Malfunction
indicator lamp
Electric power steering
system warning light
Pre-collision system
warning light*1
SRS warning light
(Blinking and
then continu-
ously on)Tire pressure warning light
(U.S.A.)
(Canada)ABS warning light
(Comes on)
Slip indicator
Follow the correction procedures.
Open door warning light
(On the cen-ter panel)
Front passenger’s seat belt
reminder light
Low fuel level warning light
(Illuminates without
blinking)Tire pressure warning light*2
(On the
instrument
cluster)Driver’s seat belt
reminder light
Master warning light
For further information, re fer to the Owner's Manual.
