2012 Lexus HS250h Camera

REAR VIEW MONITOR SYSTEM
291
NOTICE
DIf the back of the vehicle is hit, the
position and mounting angle of the
camera may change. Be sure to
have the camera’s position and
mounting angle checked at your
Lexus dealer.
DAs the camera has a water proof
construction, do not detach, disas-
semble or modify it. This may
cause incorrect operation.
DIf the temperature changes rapidly,
such as when hot water is poured
on the vehicle in cold weather, the
system may not operate normally.
DDo not strongly rub the camera
lens. If the camera lens is
scratched, it can not transmit a
clear image.
DDo not allow organic solvent, car
wax, window cleaner or glass coat
to adhere to the camera. If this
happens, wipe it off as soon as
possible.
DIf the tire size is changed, the area
displayed on the screen may
change.
DWhen washing the vehicle, do not
apply intensive bursts of water to
the camera or camera area. Doing
so may result in the camera mal-
functioning.
INFORMATION
If the camera lens becomes dirty, it
cannot transmit a clear image. If wa-
ter droplets, snow, or mud adhere to
the lens, rinse with water and wipe
with a soft cloth. If the lens is ex-
tremely dirty, wash it with a mild
cleanser and rinse.
DArea displayed on screen
Image is displayed approximately level
on screen.
U8004LS
" Corners of bumper
11 08.03HS250h_NAVI_U
75051U
9

REAR VIEW MONITOR SYSTEM
292
U8002LS
NOTICE
DThe area detected by the camera is
limited. The camera does not de-
tect objects which are close to ei-
ther corner of the bumper or under
the bumper.
DThe area displayed on the screen
may vary according to vehicle ori-
entation or road conditions.
DThe rear view monitor system cam-
era
U8003AASLY
The rear view monitor system camera is lo-
cated on the trunk as shown in the illustra-
tion.
In the following cases, it may become diffi-
cult to see the images on the screen, even
when the system is functioning.
DIn the dark (for example, at night)
DWhen the temperature near the lens is
high or low
DWhen water droplets are adhering to
the camera, or when humidity is high
(for example, when it rains)
DWhen foreign matter (for example,
snow or mud) is adhering to the camera
DWhen the camera has scratches or dirt
on it
DWhen the sun or the beam of head-
lights is shining directly into the camera
lens
NOTICE
The camera uses a special lens. The
distance of the image that appears on
the screen differs from the actual dis-
tance.
11 08.03HS250h_NAVI_U
75051U

REAR VIEW MONITOR SYSTEM
293
U8003LS
If a bright light (for example, sunlight re-
flected off the vehicle body) is picked up by
the camera, the smear effect
∗peculiar to
the camera may occur.
∗: Smear effect—A phenomenon that oc-
curs when a bright light (for example, sun-
light reflected off the vehicle body) is
picked up by the camera; when trans-
mitted by the camera, the light source ap-
pears to have a vertical streak above and
below it.
When the camera is used under fluores-
cent lights, sodium lights, or mercury lights
etc., the lights and the illuminated areas
may appear to flicker.
11 08.03HS250h_NAVI_U
75051U
9

WIDE VIEW FRONT MONITOR SYSTEM
296
The wide view front monitor uses a super−
wide angle lens to display on screen the
areas to the left and right of the vehicle and
the blind spots to the front of the vehicle.
This system helps the driver check for ap-
proaching cars, bicycles and pedestrians
when at intersections with poor visibility.
CAUTION
DAlways make sure to check all
around the vehicle with your own
eyes when driving.
DDue to the property of the front
camera lens, the position of and
distance to people or objects dis-
played differs from actual position
and distance.
DNever depend on the front monitor
only. Use caution just as you would
when driving any other vehicle.
DNever drive while looking only at
the screen as the image on the
screen is different from actual con-
ditions. If you drive while looking
only at the screen, you may hit a
person or an object, resulting in an
accident. When driving, be sure to
check the vehicle’s surroundings
with your own eyes and the ve-
hicle’s mirrors.
DWhen the outside temperature is
low, the displayed image may be-
come faint or dark. Moving images
will be distorted or not entirely vis-
ible, so be sure to check the ve-
hicle’s surroundings with your
own eyes and the vehicle’s mirrors
while driving.
DThe displayed image may be darker
and moving images may be slightly
distorted when the system is cold.
DDo not use the front monitor in the following cases:
DOn icy or slick road surfaces,or
in snow
DWhen using tire chains or emer-
gency tires
DWhen the hood or the front pas-
senger door is not completely
closed
DOn roads that are not flat or di-
rect, such as slopes or curves
11 08.03HS250h_NAVI_U
75051U
Wide view front monitor
system —

WIDE VIEW FRONT MONITOR SYSTEM
297
NOTICE
DIf the front of the vehicle is hit, the
camera’s position and mounting
angle may change. Contact your
Lexus dealer.
DRapid temperature changes, such
as when hot water is poured on the
vehicle in cold weather, may cause
the system to function abnormally.
DWhen replacing the tires, please
consult your Lexus dealer. If you
replace the tires, the area dis-
played on the screen may change.
DIf the camera lens is dirty, it cannot
transmit a clear image. Rinse with
water and wipe with a soft cloth. If
extremely dirty, wash with a mild
cleanser and rinse.
INFORMATION
DThe area displayed on the screen
may vary according to vehicle sta-
tus or road conditions.
D Due to the property of the front
camera lens, the perceived dis-
tance from images that appear on
the screen differs from the actual
distance.
D In the following cases, it may be-
come difficult to see the images on
the screen, but this is not a mal-
function:
D In the dark (for example, at night)
D When the temperature near the
lens is high or low
D When there are water droplets
on the camera lens, or when hu-
midity is high (for example,
when it rains)
D When foreign matter such as
mud is stuck to the front camera
D When the sun or the beam of
headlights is shining directly
into the camera lens
D The following symptoms may oc-
cur, but do not indicate a malfunc-
tion:
D The camera may fog up when hu-
midity is high (for example,
when it rains).
D When driving at night, ambient
lights such as the lights of the
vehicles ahead and building
lighting may be reflected into the
image.
D The center or four corners of the
image may decrease in definition.
D As the procedure is the same, fol-
low the instructions for navigation
screen adjustment to adjust the
wide view front monitor. (See page
36.)
11 08.03HS250h_NAVI_U
75051U
10

WIDE VIEW FRONT MONITOR SYSTEM
298
camera>
U9007LS
1Masking
This section is masked to prevent the
driver from moving the vehicle while
only watching the wide view front
monitor screen. The driver must visu-
ally confirm this area directly.
2Camera’s field of view
3Objects visible to the camera
4Objects not visible to the camera
5Parts of the vehicle (bumper, grille,
etc.)
The area displayed on the screen may
vary according to vehicle orientation or
road conditions.
11 08.03HS250h_NAVI_U
75051U
— Area displayed on the
screen

WIDE VIEW FRONT MONITOR SYSTEM
299
D
The wide view front monitor system
camera
U9005AASLY
The wide view front monitor system cam-
era is located on the front grille as shown
in the illustration.
NOTICE
Observe the following precautions to
ensure that the wide view front moni-
tor functions properly:
DDo not hit the camera or subject it
to strong impacts as this may
cause its position and mounting
angle to change.
DAs the camera is water proof, do
not detach, disassemble or modify
it. Doing so may cause incorrect
operation.
DDo not scrub the camera lens
roughly or clean it with a hard
brush or abrasive cleaner. Doing
so may damage the lens and ad-
versely affect the image.
DAs the camera cover is resin, do
not allow organic solvent, car wax,
window cleaner or glass coating
agent to adhere to it. If this hap-
pens, wipe clean as soon as pos-
sible.
DDo not expose the front camera to
sudden temperature changes
such as by pouring hot water on
the vehicle in cold weather.
DIf the front camera is hit, its posi-
tion and mounting angle may
change. Be sure to have the front
camera checked by your Lexus
dealer.
DBe careful when driving on rough
roads as the surface of the camera
may be damaged by flying stones
or other debris.
INFORMATION
If the camera lens becomes dirty, it
cannot transmit a clear image. If wa-
ter droplets, snow, or mud adhere to
the lens, rinse with water and wipe
with a soft cloth. If the lens is ex-
tremely dirty, wash it with a mild
cleanser and rinse.
11 08.03HS250h_NAVI_U
75051U
10

WIDE VIEW FRONT MONITOR SYSTEM
300
U9004LS
If a bright light (for example, sunlight re-
flected off the vehicle body) is picked up by
the front camera, the smear effect
∗pecu-
liar to the camera may occur.
∗: Smear effect is a phenomenon that oc-
curs when a bright light (for example, sun-
light reflected off the vehicle body) is
picked up by the camera; when trans-
mitted by the camera, the light source ap-
pears to have a vertical streak above and
below it.
When the camera is used under fluores-
cent lights, sodium lights, or mercury lights
etc., the lights and the illuminated areas
may appear to flicker.
U9001AASLY
To display the front view, push the
“VIEW” button with the “POWER”
switch in ON mode and vehicle speed at
7 mph (12 km/h) or less.
DCancelation of the wide view front
monitor
In the following situations, the front monitor
will be canceled:
DWhen the shift position is shifted to “R”
or “P”.
DAny of the mode buttons around the
display, such as “MENU”button on the
Remote Touch is pushed.
DWhen the “VIEW” button is pushed
DWhen vehicle speed exceeds approxi-
mately 7 mph ( 12 km/h)
11 08.03HS250h_NAVI_U
75051U
—
Activating the wide view
front monitor