2012 Lexus HS250h navigation

18
U0002AASLY
U0001LS
U0004LS
U0013LC
1Push the “MENU” button on the
Remote Touch.
2Select “Destination” and push
the “ENTER” button on the Re-
mote Touch.
3There are 11 different methods to
search destinations.
See “Destination search” on page 68.
4Select “Go to ” and push the
“ENTER” button on the Remote
Touch.
The navigation system performs a search
for the route.
11 08.03HS250h_NAVI_U
75051U
—Operation flow: guiding the route

20
U0002AASLY
U0002LS
U0016LCa
1Push the “MENU” button on the
Remote Touch.
2Select “Destination” and push
the “ENTER” button on the Re-
mote Touch.
3Select “Go Home” and push the
“ENTER” button on the Remote
Touch.
“Go Home”can be used if your home has
been registered. (To register “Home”, see
“ (a) Registering home” on page 117.)
4Select “Go to ” and push the
“ENTER” button on the Remote
Touch.
The navigation system performs a search
for the route.
11 08.03HS250h_NAVI_U
75051U
—Setting home as the destination

22
hMap i
Displaying mapsPage
Viewing the map screen12
Displaying the current vehicle position39
Viewing the current position vicinity map40
Changing the scale48
Changing the map orientation50
Displaying Point of Interest108
Displaying the estimated travel/arrival time to the destination99
Selecting the dual map screen46
Viewing foot print map49
Deleting map screen buttons330
Searching destinationPage
Searching the destination
(by home, Point of Interest, phone #, etc.)68
Changing the selected search area68
Operating the map location of the selected destination89
hRoute guidance i
Before starting route guidancePage
Setting the destination89
Viewing alternative routes89
Starting route guidance89
Before starting or during route guidancePage
Viewing the route89
Adding destinations100
Changing the route102
Displaying the estimated travel/arrival time to the destination99
11 08.03HS250h_NAVI_U
75051U
Navigation system function index

24
To display the “Start” screen, push the“MENU”button on the Remote Touch.
1“Destination”
You can use one of 10 different methods to
search your destination. 25, 67 ........
2“Info./Phone”
Select this button to operate the hands −
free system and display fuel economy in-
formation, etc. 28, 135 ...............
3“Setup”
Select this button to adjust settings of the
navigation, audio and hands −free sys-
tems, etc. 27, 311
...................
4“Climate”
Select this button to operate the air condi-
tioning system. 275
..................
5“Audio”
Select this button to operate the audio sys-
tem. 185 ...........................
11 08.03HS250h_NAVI_U
75051U
Quickreference (“Start” screen)

SECTION1
NAVIGATION SYSTEM: BASIC FUNCTIONS
29
NAVIGATION SYSTEM:
BASIC FUNCTIONS
Basic information before operation
DInitial screen 30 ...........................................
D How to use the Remote Touch 31 ............................
D Inputting letters and numbers/List screen operation 33 ..........
D Screen adjustment 36 ......................................
D Display operation 38 .......................................
D Help icon 39 ..............................................
D Map screen operation 39
..................................
Current position display 39 ...............................
Screen scroll operation 40 ................................
Switching the screens 46 .................................
Map scale 48 ...........................................
Foot print map 49 .......................................
Orientation of the map 50 .................................
Standard map icons 50 ...................................
D Voice command system 51
................................
Natural speech information 53 .............................
Command list 55 ........................................
11 08.03HS250h_NAVI_U
75051U
1

NAVIGATION SYSTEM: BASIC FUNCTIONS
30
U1001LS
When the “POWER” switch is in ACCES-
SORY or ON mode, the initial screen will
be displayed and the system will begin
operating.
CAUTION
When the vehicle is stopped with the
hybrid system operating, always ap-
ply the parking brake for safety.
After a few seconds, the “CAUTION”
screen will be displayed.
U1002LC
After about 5 seconds, the “CAUTION”
screen automatically switches to the map
screen. When selecting“Show Map”or
pushing the “MAP/VOICE” button on the
Remote Touch, the map screen is dis-
played.
11 08.03HS250h_NAVI_U
75051U
Initial screen

NAVIGATION SYSTEM: BASIC FUNCTIONS
31
D
Maintenance information
This system informs about when to replace
certain parts or components and shows
dealer information (if registered) on the
screen.
When the vehicle reaches a previously set
driving distance or date specified for a
scheduled maintenance check, the “Infor-
mation” screen will be displayed when the
navigation system is in operation.
U1057LC
To disable this screen, select “Do Not
Display This Message Again”. This
screen goes off if the screen is not op-
erated for several seconds.
To prevent this information screen from be-
ing displayed again, select “Do Not
Display This Message Again” .
To register “Maintenance information”, see
“—Maintenance” on page 380. This navigation system can be operated by
the Remote Touch when the “POWER”
switch is in ACCESSORY or ON mode.
U1007AASLY
A pointer is shown on the screen. Use the
Remote Touch knob to move the pointer
and select the buttons on the screen.
U1008AASLY
To select a button on the screen, place the
pointer on top of the button and then push
the
“ENTER” button on the Remote
Touch. Once a button has been selected,
the screen will change.
When the pointer moves close to a button,
it will be automatically pulled onto that but-
ton. The strength of this pull can be ad-
justed. (See page 316.)
The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
11 08.03HS250h_NAVI_U
75051U
How to use the Remote
Touch
1

NAVIGATION SYSTEM: BASIC FUNCTIONS
32
Pointer shape can be changed. (See page
316.)
: Change to an arrow.
: Change to a left hand.
: Change to a right hand.
:Display of the pointer can be
turned off. (Even if display of the pointer is
turned off, the pointer will appear on the
map screen as “+”.)
Push the “ ” button on the Remote Touch
to zoom in on the map screen and “ ”to
zoom out. These buttons can also be used
to scroll up and down on list screens.
Push the “MENU”button on the Remote
Touch to set a destination or adjust set-
tings for the audio system, air conditioning
system, etc.
You can return to the map screen by push-
ing the “MAP/VOICE” button on the Re-
mote Touch.
CAUTION
DDo not allow fingers, fingernails or
hair to become caught in the
Remote Touch as this may cause
an injury.
DBe careful when touching the
Remote Touch in extreme tempera-
tures as it may become very hot or
cold due to the temperature inside
the vehicle.
NOTICE
DDo not allow the Remote Touch to
come into contact with food, liq-
uid, stickers or lit cigarettes as do-
ing so may cause it to change col-
or, emit a strange odor or stop
functioning.
DDo not subject the Remote Touch
to excessive pressure or strong
impact as the knob may bend or
break off.
DDo not allow coins, contact lenses
or other such items to become
caught in the Remote Touch as this
may cause it to stop functioning.
DItems of clothing may rip if they be-
come caught on the Remote Touch
knob.
DIf your hand or any object is on the
Remote Touch knob when the
“POWER” switch is turned to AC-
CESSORY mode, the Remote
Touch knob may not operate prop-
erly.
INFORMATION
Under extremely cold conditions, the
Remote Touch knob may react slow-
ly.
11 08.03HS250h_NAVI_U
75051U