2012 JEEP LIBERTY eco

[x] Cancel search: eco

Page 255 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual make your selection, press and release the SELECT
button. Refer to “Rear Park Assist System” in “Under-
standing The Features Of Your Vehicle” for system func-
tion and operating information.

Page 256 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual MEDIA CENTER 230 (REQ) — AM/FM STEREO
RADIO AND 6–DISC CD/DVD CHANGER
(MP3/WMA AUX JACK)
NOTE:The radio sales code is located on the lower right
side of the radio faceplate.
Operating Instructions

Page 257 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual SEEK Buttons
Press and release the SEEK buttons to search for the next
listenable station in AM/FM mode. Press the right switch
to seek up and the left switch to seek down. The radio
will remain tuned

Page 258 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual If your vehicle is not equipped with or this feature is not
available on your vehicle, a “Not Equipped With
Uconnect Phone” message will display on the radio
screen.
TIME Button
Press the TIME but

Page 259 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual TUNE Control
Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the frequency.
Setting the Tone, Balance, and Fade
Push the rotary TUNE/SCROLL control knob

Page 264 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual and press and release that button. If a button is not
selected within five seconds after pressing the SET but-
ton, the station will continue to play but will not be
stored into pushbutton memory.
You

Page 265 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual CAUTION!
The radio may shut down during extremely hot
conditions. When this occurs, the radio will indicate
“Disc Hot” and shut off until a safe temperature is
reached. This shutdown is necessary

Page 266 of 558

JEEP LIBERTY 2012 KK / 2.G Owners Manual The disc can be ejected with the radio and ignition OFF.
SEEK Button (CD MODE)
Press the right SEEK button for the next selection on the
CD. Press the left SEEK button to return to the beginning
of th