2012 JAGUAR XF brake sensor

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Warning lamps Warning lamps Displayed on the instrument panelDisplayed on the instrument panel
Electric parking brake Electric parking brake See page 3, item See page 3, item 19
Auto headlamps and wipers Auto headlamps and wipers See page 3, items See page 3, items 1 and 7and 7and
Starting and driving
6
Releasing
With the ignition on, apply the foot brake and press • down on the parking brake lever.
If the vehicle is stationary with the parking brake • applied and either Drive or Reverse selected, pressing the accelerator will automatically release the parking brake.
Note:Do NOT use the recess in the electric parking brake as a storage area.
Cruise control and forward alert See page 3, items See page 3, items 5 and 29and 29and
Starting and driving
7
Braking system fault or brake fluid low
Braking system fault or brake fluid low. USA only
Dynamic stability control. Flashes when DSC is operating
DSC switched off, Trac DSC on
Automatic speed limiter active
Seat belt reminder
Low tire pressure
Anti-lock braking system fault.
Anti-lock braking system fault. USA only
Engine malfunction
Applying
With the vehicle stationary, lift up the parking brake • lever and then release it. The red warning indicator in the instrument panel will illuminate.
Operating note
The brake must be manually applied when parking.
Cruise control override
Cruise control disengages when brakes are applied or when speed is below 18mph (30 km/h).
Auto high beam
1. When AUTO is selected on the lighting control the side lamps and headlamps will turn on automatically when ambient light fades. With the control in the low beam position, high beam will activate automatically when ambient light falls below a pre set level. Vehicle speed must be above 25 mph (40 km/h).
Exit delay
2, 3, 4. The headlamps can be set to temporarily light your way when you exit the car at night. Rotate the control for exit delay periods of 30 seconds, 60 seconds or 120 seconds.
1
432
MAX
MIN
MAX
MIN
6
5
7
Auto wipers
Automatic wipers are activated by a rain sensor. When the wiper control is moved up to the first position the wipers will operate automatically as required. Sensitivity can be adjusted.
5. First stop for auto position.
6. Rain sensor maximum sensitivity.
7. Rain sensor minimum sensitivity.
Setting cruise control speed
Use to set cruise speed or increase/decrease 1. speed while cruise control is operating.
Resumes the set speed after a cancellation.2.
Cancels current setting but retains in memory.3.
automatically slow down and then maintain your set gap until the road ahead clears. At that point your vehicle will accelerate to the set cruise control speed.
ACC gap setting
4. Press to increase or decrease the set gap to the vehicle ahead. An amber warning icon will illuminate in the instrument panel. The message centre will display the current set gap. There are four gap settings to choose from.
Forward alert
An additional feature of ACC, forward alert provides limited detection of objects in the road ahead. When necessary it will give an audible warning plus the visual warning FORWARDALERT in the message centre. The driver must take appropriate action.
5. Press to activate the Forward Alert function.
The Forward Alert icon will illuminate in the instrument panel.
Sensitivity of detection can be adjusted. With ACC disengaged, use the GAP SETTING control 4 to adjust the setting.
Adaptive cruise control (ACC)
ACC can be programmed to maintain a set gap to the vehicle ahead. If the vehicle ahead is travelling slower than your set cruise control speed, your vehicle will
Driver intervention
ACC IS NOT a collision warning or avoidance system. Additionally the system WILLNOT detect:
Stationary or slow moving vehicles below • 6 mph (10 km/h).
Pedestrians or objects in the roadway.•
Oncoming vehicles in the same lane.•
Automatic car wash
Before entering an automatic car wash, turn the wipers off to deactivate the rain sensor. Otherwise, the wipers will operate during the washing process and may be damaged.
4
32
1
5
Air bag fault
Rear fog lamp on
Forward alert active
Adaptive cruise control active
Automatic speed limiter (ASL) Automatic speed limiter (ASL) See page 3, item See page 3, item 18
ASL allows any speed between 30 km/h and 240 km/h (18 to 150 mph) to be set as a maximum speed. This is useful to ensure any given speed limit is not exceeded.
Setting a speed
The setting procedure can be made while the vehicle is stationary.
Press the 1.ASL button. An ASL warning lamp illuminates in the instrument panel.
Use the cruise control + and - 2.controls to set a speed. The message centre will display the set speed. Adjustment can be made at any time to suit variable speed limits.
If ASL is cancelled due to kick down acceleration or by pressing the cruise control CANCEL, the message centre will display a ‘LIMITERCANCELLED’ message.
Press the RESUME control to reinstate the ASL set speed.
ASL
Driver intervention
When negotiating a steep downhill gradient, vehicle speed may exceed the set speed. The message centre will display a warning.

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
JaguarDrive control JaguarDrive control See page 3, items See page 3, items 17, 20 17, 20 and 21 and 21 and Parking aids Parking aids
Glovebox valet mode
Door mirrors and blind spot monitoring Door mirrors and blind spot monitoring
Driving aidsDriving aids
Winter mode, Dynamic mode and Dynamic Stability Control (DSC) allow the driver to more finely tune the vehicle driving characteristics to suit prevailing conditions.
Winter mode.1. Use in slippery road conditions. Selects 2nd gear for driving away, moderates engine response and modifies gear change strategy to ensure maximum possible traction is achieved.
Dynamic mode.2. Optimises vehicle systems to deliver a high performance driving experience. If Sport mode is now used with paddle gear selection, there is no automatic gear change, even if the rev limit is reached. Dynamic mode remains selected for six hours after the engine is switched off
DSC.3. The default condition at engine start is DSC on and is designed to control vehicle stability.
2
13
TracDSC is an alternative setting that optimises the DSC settings for maximum traction in difficult conditions. TracDSC enables a more involving and focused driving experience. To select TracDSC, press and release the button. Touch again to return to DSC. To turn DSC off, press for more than 10 seconds.
Message centre
The message centre displays the JaguarDrive Selector position, P, R, N, D or S, the manual mode gear selections 1 to 6 (or 1 to 8) and the JaguarDrive Control mode selection.
When TracDSC is selected, the DSC warning lamp will illuminate and the message centre will briefly display TRAC DSC.
When DSC OFF is selected, the DSC warning lamp will illuminate and the message centre will display DSC OFF until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability control, for examples of JaguarDrive settings.
Blind spot monitoring
Each mirror displays amber icons to warn of overtaking vehicles in adjacent lanes. The monitored area extends approximately 20 ft (6 meters) behind your rear wheels and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above 10mph (16km/h) while in a forward gear. An amber dot illuminates when speed is below the threshold.
Mirror dip when reversing
This feature can be used to improve lower side views while reversing. It can be enabled or disabled via the touch screen. From the Home screen, select Vehicle, then Veh.settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the set dip position will be automatically selected. The mirrors will return to their normal position when another gear is selected.
8 9
When Reverse is selected, the rear and front parking aids and rear view camera will activate.
The touch screen will display a vehicle graphic and indicate the approximate distance to any object detected. An audible alert will increase in frequency as the object is approached.
When moving forward into a space, activate the front sensors with the parking aid switch in the overhead panel. Alternatively, select R then Drive.
Audible alert volume can be adjusted via the touch screen. From the Home screen, select Set-up, then System, then Volume presets. Use the + or - softkeys alongside Parking aid to adjust volume.
Cancelling the parking aid screen
Touch the screen to return to the previous view.
Rear view camera
Activates when Reverse is selected. Guidance lines to aid reversing appear on the touch screen. The camera display has priority over the parking aid display. To view the parking aid display instead, or cancel the display at any time, touch the display.
The camera is deactivated when Drive is selected and vehicle speed exceeds 10 mph (16 km/h).
Note:Sensors may activate when water, snow or ice are detected on the surface of the sensors. Ensure that the sensors are cleaned regularly.
To open the glovebox, press the facia mounted switch.
Valet mode
The glovebox and luggage compartment can be security locked to deny access to a parking attendant. Before handing over your Jaguar Smart Key, remove the emergency key blade and keep it in a safe place.
To set your Personal Identification Number (PIN) :
• On the touch screen select Home menu.
• Now select Valet.
• Enter a your four digit PIN (personally chosen) and touch OK. Valet on is displayed as a confirmation.
To deselect valet mode
Access the Valet screen and enter your PIN. Now press OK. Valet off is displayed and the glovebox and luggage compartment are now accessible.
Insert the emergency key blade back into the Jaguar Smart Key.
JJM189640121.indd 8-9JJM189640121.indd 8-9JJM189640121.indd 8-921/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:4121/03/2011 13:48:41