2012 INFINITI G37 sensor

Black plate (465,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]GUID-9C7293A2-4691-4D4B-AD12-31CC5DD1C780
STI0696
Sedan Use the following steps to mount the
license plate:
Before mounting the license plate, confirm
that the following parts are enclosed in the
plastic bag.
. License plate bracket
. J-nut 6 2
. Screw 6 2
. Screw grommet 6 2
Only use the recommended mounting
position, otherwise the Intelligent Cruise
Control (ICC) sensor obstruction (if so
equipped) may result.
SEDAN GUID-5895C78E-057F-4431-9277-C9151DE76A20
1. Park the vehicle on flat, level ground.
2. Locate the center position
* A
as
illustrated. Position the license plate
bracket at a distance of approximately
0.35 in (9 mm)
* B
from the bottom of
the bumper. Hold the license plate
bracket in place.
3. Mark the center of the hole
* C
with a
felt-tip pen.
4. Carefully drill two pilot holes using a
0.39 in (10 mm) drill bit at the marked
locations. (Be sure that the drill only
goes through the bumper fascia.)
Technical and consumer information
9-15INSTALLING FRONT LICENSE PLATE