2012 INFINITI G37 ECU

Black plate (90,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-12 Instruments and controls GUID-4DFBC906-87A9-4F02-A005-17EFB9C1B112
All-Wheel Drive (AWD) warning light (AWD
models)* Intelligent Cruise Control (ICC) system
warning light (orange)* Exterior light indicator
Anti-lock Braking System (ABS) warning
light Intelligent Key warning light Front fog light indicator light
Low tire pressure warning light Front passenger air bag status light
Automatic transmission check warning light Master warning light High beam indicator light
Brake warning light Preview Function warning light (orange)* Malfunction Indicator Light (MIL)
Seat belt warning light Security indicator light
Charge warning light Supplemental air bag warning light Turn signal/hazard indicator lights
Engine oil pressure warning light Vehicle Dynamic Control (VDC) warning light Vehicle Dynamic Control (VDC) off indicator
light
4 Wheel Active Steer (4WAS) warning light* Automatic transmission position indicator
light* *: if so equipped
CHECKING BULBS GUID-EA46E715-CDC1-4316-A1CC-964FA500463C
With all doors closed, apply the parking
brake and push the ignition switch to the
ON position without starting the engine.
The following lights will come on (if so
equipped):
, or , , , , ,
The following lights come on briefly and
then go off (if so equipped):
, or , , , , ,
If any light does not come on, it may
indicate a burned-out bulb or an open circuit in the electrical system. Have the
system checked by an INFINITI retailer.
Some indicators and warnings are also
displayed on the dot matrix crystal display
between the speedometer and tachometer.
(See “ Dot matrix liquid crystal display ”
(P.2-20).) WARNING LIGHTS GUID-7D034C77-E122-4514-8406-A8ED72A0DDF7
All-Wheel Drive (AWD) warning
light (AWD models) (if so equipped) GUID-6272AC4F-020E-4475-8EA4-DEB8ABD3D971
The warning light comes on when the
ignition switch is pushed to ON. It turns off
soon after the engine is started.
If the AWD system malfunctions, or the
diameter of the front and the rear wheels
are different, the warning light will either
remain illuminated or blink. (See “ All-
Wheel Drive (AWD) ” (P.5-45).)WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS

Black plate (95,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]Seat belt warning light and
chime GUID-D581458D-4D08-42CB-98CF-6FDB12BEDBBB
The light and chime remind you to fasten
seat belts. The light illuminates whenever
the ignition switch is pushed to the ON
position, and will remain illuminated until
the driver ’ s seat belt is fastened. At the
same time, the chime will sound for about
6 seconds unless the driver ’ s seat belt is
securely fastened.
The seat belt warning light for the front
passenger will illuminate if the seat belt is
not fastened when the front passenger ’ s
seat is occupied. For approximately 5
seconds after the ignition switch is in the
ON position, the system does not activate
the warning light for the front passenger.
See “ Seat belts ” (P.1-14) for precautions
on seat belt usage.
Supplemental air bag warning
light GUID-C698CB3F-4874-4667-8C3F-C4879E0088E6
After pushing the ignition switch to the ON
position, the supplemental air bag warning
light will illuminate. The supplemental air
bag warning light will turn off after about 7
seconds if the supplemental front air bag
and supplemental side air bag, curtain
side-impact air bag systems and/or pre- tensioner seat belt are operational.
If any of the following conditions occur, the
supplemental front air bag, supplemental
side air bag, supplemental curtain side-
impact air bag and pretensioner seat belt
needs servicing and your vehicle must be
taken to your nearest INFINITI retailer.
. The supplemental air bag warning light
remains on after approximately 7 sec-
onds.
. The supplemental air bag warning light
flashes intermittently.
. The supplemental air bag warning light
does not come on at all.
Unless checked and repaired, the Supple-
mental Restraint Systems and/or the pre-
tensioner seat belt may not function
properly.
For additional information, see “ Supple-
mental restraint system ” (P.1-41).
WARNING If the supplemental air bag warning light is
on, it could mean that the supplemental
front air bag, supplemental side air bag,
curtain side-impact air bag systems and/or
pretensioner seat belt will not operate in an accident. To help avoid injury to yourself or
others, have your vehicle checked by a
retailer as soon as possible.
Vehicle Dynamic Control (VDC)
warning light GUID-4B2E20A8-B5B5-4DB7-8E18-2B75CB592A50
The light will blink when the VDC system or
the traction control system is operating,
thus alerting the driver that the vehicle is
nearing its traction limits. The road surface
may be slippery.
When the vehicle dynamic control warning
light illuminates, the vehicle dynamic
control system is turned on, this light
alerts the driver that the vehicle dynamic
control system ’ s fail-safe mode is operat-
ing. For example, the vehicle dynamic
control system may not be functioning
properly. Have the system checked by an
INFINITI retailer. If a malfunction occurs in
the system, the vehicle dynamic control
system function will be canceled but the
vehicle is still driveable. Have the system
checked by an INFINITI retailer. For addi-
tional information, see “ Vehicle Dynamic
Control (VDC) system ” (P.5-55) of this
manual.
Instruments and controls
2-17

Black plate (97,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. Malfunction indicator light blinking —
An engine misfire has been detected
which may damage the emission con-
trol system.
To reduce or avoid emission control
system damage:
1) Do not drive at speeds above 45
MPH (72 km/h).
2) Avoid hard acceleration or decelera-
tion.
3) Avoid steep uphill grades.
4) If possible, reduce the amount of
cargo being hauled or towed.
The malfunction indicator light may
stop blinking and remain on.
Have the vehicle inspected by an
INFINITI retailer. You do not need to
have your vehicle towed to the retailer.
CAUTIONContinued vehicle operation without having
the emission control system checked and
repaired as necessary could lead to poor
driveability, reduced fuel economy, and
possible damage to the emission control
system. Security indicator light GUID-99C24DC6-544D-45AC-90DB-96CA87927F70
The light blinks when the ignition switch is
in the ACC, OFF or LOCK position. This
function indicates the security system
equipped on the vehicle is operational.
If the security system is malfunctioning,
this light will remain on while the ignition
switch is in the ON position. For additional
information, see “ Security systems ” (P.2-
28).
Turn signal/hazard indicator
lights GUID-43A6DFE4-0C5C-4670-8FA3-F545A4863F5C
The light flashes when the turn signal
switch lever or hazard switch is turned on.
Vehicle Dynamic Control (VDC)
off indicator light GUID-A3E5746E-A6AD-4CFD-BF58-F2861559DFFC
The light comes on when the vehicle
dynamic control off switch is pushed to
OFF. This indicates that the vehicle dynamic
control system and traction control system
are not operating. AUDIBLE REMINDERS GUID-41C4B23E-C45A-494B-A7CD-10E6C3CED223
Key reminder chime GUID-CF2F9D77-25F2-40E6-8D1D-517CC8383919
A chime will sound if the driver side door is
opened while the ignition switch is pushed
to the ACC position or pushed to the OFF or
LOCK position with the Intelligent Key left
in the Intelligent Key port. Make sure the
ignition switch is pushed to the OFF
position, and take the Intelligent Key with
you when leaving the vehicle.
Light reminder chime GUID-EB436840-830A-402A-A3BA-8D5BCF0162C6
A chime will sound when the driver side
door is opened with the light switch in the
or position and the ignition switch
in the ACC, OFF or LOCK position.
Turn the light switch off when you leave the
vehicle.
Parking brake reminder chime GUID-44BA1A13-88DD-4711-BED2-C34A1A0970D0
The parking brake reminder chime will
sound if the vehicle is driven at more than
4 MPH (7 km/h) with the parking brake
applied. Stop the vehicle and release the
parking brake.
Instruments and controls
2-19

Black plate (101,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]8. Engine start operation indicator
(Manual Transmission models) GUID-6F348F29-B160-4632-B05C-A45F6D5E7AD7
This indicator means that the engine will
start by pushing the ignition switch with
the clutch pedal depressed.
9. Parking brake release warning GUID-7289EFE7-F400-4C19-9597-F8AA159911CA
This warning appears when the vehicle
speed is above 4 MPH (7 km/h) and the
parking brake is applied.
10. Low fuel warning GUID-2FE47C40-46BC-4EC8-AC52-E90EBB5F8B0F
This warning appears when the fuel level in
the tank is getting low. Refuel as soon as it
is convenient, preferably before the fuel
gauge reaches the empty (E) position.
There is a small reserve of fuel remaining
in the tank when the fuel gauge reaches
the empty (E) position.
11. Low washer fluid warning GUID-54C94524-E0BC-4326-8A11-B2CD705757A6
This warning appears when the washer
tank fluid is at a low level. Add washer fluid
as necessary. (See “ Window washer fluid ”
(P.8-16).)
12. Door/trunk open warning (igni-
tion switch is in the ON position) GUID-50585695-BAF8-48B7-8A81-CEA312693DE1
This warning appears if any of the doors and/or the trunk lid are open or not closed
securely. The vehicle icon indicates which
door or the trunk lid is open on the display.
13. Loose fuel cap warning GUID-479E9C15-B26C-477B-8AA7-ED29D6CD76ED
This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. (See “ Fuel-filler
door ” (P.3-23).)
14. Check tire pressure warning GUID-174D3E5C-C80F-432A-944F-EE13C51D1486
This warning appears when the low tire
pressure warning light in the meter illumi-
nates to indicate the low tire pressure. If
this warning appears, stop the vehicle and
adjust the tire pressure to the recom-
mended COLD tire pressure shown on the
Tire and Loading Information label. (See
“ Low tire pressure warning light ” (P.2-15)
and “ Tire Pressure Monitoring System
(TPMS) ” (P.5-4).)
15. “ Time to rest ” indicator GUID-9639DC97-247E-4499-BA1B-AFF133E94400
This indicator appears when the set “ time
to rest ” indicator activates. You can set the
time for up to 6 hours. (See “ Trip
computer ” (P.2-26).) 16. Low outside temperature warn-
ing GUID-E9986E7D-DDA6-4BCF-8D8E-D8F9C645C41B
This warning appears if the outside tem-
perature is below 37 8 F (3 8 C). The warning
can be set not to be displayed. (See “ Trip
computer ” (P.2-26).)
17. Cruise indicator GUID-8437A118-88BE-4895-A266-56D415AE4EC7
Cruise main switch indicator: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The indicator is displayed when the cruise
control main switch is pushed. When the
main switch is pushed again, the indicator
disappears. When the cruise control main
switch indicator is displayed, the cruise
control system is operational.
Cruise set switch indicator: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The indicator is displayed while the vehicle
speed is controlled by the cruise control
system. If the indicator blinks while the
engine is running, it may indicate that the
cruise control system is not functioning
properly. Have the system checked by an
INFINITI retailer.
See “ Cruise control ” (P.5-21) for details.
Instruments and controls
2-23

Black plate (106,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-28 Instruments and controls. BACK
Select this submenu to return to the top
page of the setting mode.
. LANGUAGE
Select this submenu to choose English
or French for display.
. UNIT
Select this submenu to choose the unit
from MPG or l/100 km.
7. Warning check GUID-482A5E02-822A-440D-A025-9008CF97C341
SKIP: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the switch
* A
to move to the
warning check mode.
Push the
switch
* B
to select other
menus.
DETAIL: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This item is available only when a warning
is displayed.
Select this menu to see the details of
warnings. GUID-DFF4C042-E077-4731-87B8-3AE0A5EBC365
SIC2132
Your vehicle has two types of security
systems, as follows:
. Vehicle security system
. INFINITI Vehicle Immobilizer System
The security condition will be shown by the
security indicator light. VEHICLE SECURITY SYSTEM GUID-171432EC-AF0D-4FCE-9944-7525D5E43E15
The vehicle security system provides visual
and audio alarm signals if someone opens
the doors, hood, or trunk lid when the
system is armed. It is not, however, a
motion detection type system that acti-
vates when a vehicle is moved or when a
vibration occurs.
The system helps deter vehicle theft but
cannot prevent it, nor can it prevent the
theft of interior or exterior vehicle compo-
nents in all situations. Always secure your
vehicle even if parking for a brief period.
Never leave your Intelligent Key(s) in the
vehicle, and always lock it when unat-
tended. Be aware of your surroundings,
and park in secure, well-lit areas whenever
possible.
Many devices offering additional protec-
tion, such as component locks, identifica-
tion markers, and tracking systems, are
available at auto supply stores and speci-
alty shops. Your INFINITI retailer may also
offer such equipment. Check with your
insurance company to see if you may be
eligible for discounts for various theft
protection features.SECURITY SYSTEMS

Black plate (107,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SIC2045
How to arm the vehicle security
system GUID-284AD2C3-F1E7-4BEE-9749-AD5EE84FDA8A
1. Close all windows.
The system can be armed even if the
windows are open.
2. Push the ignition switch to the OFF
position.
3. Remove the Intelligent Key from the
vehicle.
4. Close all doors, hood and trunk. Lock
all doors. The doors can be locked with
the Intelligent Key, door handle request
switch, power door lock switch or
mechanical key. 5. Confirm that the security indicator light
comes on. The security indicator light
stays on for about 30 seconds. The
vehicle security system is now pre-
armed. After about 30 seconds the
vehicle security system automatically
shifts into the armed phase. The
security light begins to flash once every
approximately 3 seconds. If, during this
30-second pre-arm time period, the
door is unlocked, or the ignition switch
is pushed to ACC or ON, the system will
not arm.
Even when the driver and/or passengers
are in the vehicle, the system will activate
with all doors, hood, and trunk lid locked
with the ignition switch in the LOCK
position. When pushing the ignition switch
to the ACC or ON position, the system will
be released.
Vehicle security system activation GUID-957137B0-269E-4187-8DB6-D258DE6DE960
The vehicle security system will give the
following alarm:
. The headlights blink and the horn
sounds intermittently.
. The alarm automatically turns off after
approximately 1 minute. However, the
alarm reactivates if the vehicle is tampered with again.
The alarm is activated by:
. Unlocking the door or opening the trunk
lid without using the button on the
Intelligent Key, the door handle request
switch or the mechanical key. (Even if
the door is opened by releasing the
door inside lock knob, the alarm will
activate.)
. Opening the hood.
How to stop an activated alarm GUID-8B3CB6FD-B499-42C1-8E7D-2ABD15A79496
The alarm will stop by unlocking a door by
pushing the unlock button on the Intelli-
gent Key, the door handle request switch
or using the mechanical key. The alarm will
not stop if the ignition switch is pushed to
the ACC or ON position.
If the system does not operate as de-
scribed above, have it checked by an
INFINITI retailer.
Instruments and controls
2-29

Black plate (108,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-30 Instruments and controlsINFINITI VEHICLE IMMOBILIZER
SYSTEM GUID-CB62A730-6D41-4D19-9D5A-68BEE6A43E01
The INFINITI Vehicle Immobilizer System
will not allow the engine to start without
the use of the registered Intelligent Key.
Never leave these keys in the vehicle.
Statement related to section 15 of FCC
rules for INFINITI Vehicle Immobilizer
System (CONT ASSY - CARD SLOT)
FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.
NOTE:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user ’ s authority
to operate the equipment. For Canada:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions: (1) this
device may not cause interference, and
(2) this device must accept any interfer-
ence, including interference that may
cause undesired operation of the device.
SIC2045
Security indicator light GUID-8038519A-3397-41F4-B7BF-EDCD0A1F79A5
The security indicator light is located on
the meter panel. It indicates the status of
the INFINITI Vehicle Immobilizer System.
The light blinks after the ignition switch
was in the LOCK position. This function
indicates the security systems equipped on
the vehicle are operational.
If the INFINITI Vehicle Immobilizer System
is malfunctioning, this light will remain on
while the ignition switch is in the ON
position.

Black plate (137,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]GUID-3B0103FD-8C82-48ED-ABBE-0FF7FE9A8F16
The light illuminates when the trunk lid is
opened. When the trunk lid is closed, the
light will turn off.
The light will also turn off after 15 minutes
when the light remains illuminated after
the ignition switch has been pushed to the
OFF or LOCK position to prevent the
battery from becoming discharged. GUID-0BF67760-C562-4D9A-8217-C1A104712017
HomeLink ®
Universal Transceiver provides
a convenient way to consolidate the func-
tions of up to three individual hand-held
transmitters into one built-in device.
HomeLink ®
Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
. Is powered by your vehicle ’ s battery. No
separate batteries are required. If the
vehicle ’ s battery is discharged or is
disconnected, HomeLink ®
will retain all
programming.
Once HomeLink ®
Universal Transceiver is
programmed, retain the original transmit-
ter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink ®
Universal Transceiver buttons
should be erased for security purposes.
For additional information, see “ Program-
ming HomeLink ®
” (P.2-60).
WARNING . Do not use HomeLink ®
Universal Trans-
ceiver with any garage door opener that
lacks safety stop and reverse features as required by federal safety standards.
(These standards became effective for
opener models manufactured after April
1, 1982.) A garage door opener which
cannot detect an object in the path of a
closing garage door and then automati-
cally stop and reverse, does not meet
current federal safety standards. Using a
garage door opener without these fea-
tures increases the risk of serious injury
or death.
. During programming procedure, your
garage door or security gate may open
or close. Make sure that people and
objects are clear of the garage door,
gate, etc. that you are programming.
. Your vehicle ’ s engine should be turned
off while programming HomeLink ®
Uni-
versal Transceiver.
Instruments and controls
2-59TRUNK LIGHT HomeLink ®
UNIVERSAL TRANSCEIVER (if so
equipped)