2012 INFINITI G37 display

Black plate (312,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-134 Monitor, climate, audio, phone and voice recognition systemsHelp Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Command Action
Command List Navigation Commands Displays the navigation command list.
Phone Commands Displays the phone command list.
Audio Commands Displays the audio command list.
Information Commands Displays the information command list.
Help Commands Displays the help command list.
User Guide Displays the User Guide.
Speaker Adaptation The system can memorize the voices of up to three persons.

Black plate (314,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-136 Monitor, climate, audio, phone and voice recognition systems SAA2547
Displaying user guide GUID-8B849E3A-7F40-4D53-85B4-956D5E2A3827
You can confirm how to use voice com-
mands by accessing a simplified User
Guide, which contains basic instructions
and tutorials for several voice commands.
1. Push the INFO button on the instrument
panel.
2. Select the “ Others ” key using the
INFINITI controller and push the ENTER
button.
3. Highlight the “ Voice Recognition ” key
using the INFINITI controller and push
the ENTER button. 4. Highlight the “ User Guide ” key using
the INFINITI controller and push the
ENTER button.
5. Highlight an item using the INFINITI
controller and push the ENTER button.
Available items: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. Getting Started
Describe the basics of how to operate
the INFINITI Voice Recognition system.
. Let ’ s Practice
Mode that allows practicing by follow-
ing the instructions of the system voice.
. Using the Address Book
Refer to Navigation System Owner ’ s
Manual.
. Finding a Street Address (if so
equipped)
Refer to Navigation System Owner ’ s
Manual.
. Placing Calls
Tutorial for making a phone call by
voice command operation.
. Help on Speaking
Displays useful tips for how to correctly
speak commands in order for them to
be properly recognized by the system. . Voice Recognition Settings
Describes the available voice recogni-
tion settings.
. Adapting the System to Your Voice
Tutorial adapting the system to your
voice.
USING THE SYSTEM GUID-C13CAE54-2BBA-4454-BB04-530C8C54E5EF
Initialization GUID-40243585-B2BA-44F7-9B45-D16E82309B2E
When the ignition switch is pushed to the
ON position, INFINITI Voice Recognition is
initialized, which may take up to one
minute. When completed, the system is
ready to accept voice commands. If the
TALK
switch is pushed before the
initialization completes the display will
show the message: “ System not ready ”
or a beep sounds.
Before starting GUID-BE6859C4-94FE-417C-8C1F-B3C9BF12EB55
To get the best performance from INFINITI
Voice Recognition, observe the following.
. Keep the interior of the vehicle as quiet
as possible. Close the windows to
eliminate the surrounding noises (traf-
fic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands cor-
rectly.

Black plate (315,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. When the air conditioner is in the AUTO
mode, the fan speed decreases auto-
matically for easy recognition.
. Wait until a tone sounds before speak-
ing a command.
. Speak in a natural voice without paus-
ing between words.
SAA1588
Giving voice command GUID-EDFB4139-8145-4310-BE1F-F3CCE4E79473
1. Push and release the TALK switch
located on the steering wheel. SAA2548
2. A list of commands appears on the
screen, and the system announces,
“ Please say a command ” .
3. After the tone sounds and the icon on
the screen changes from
to ,
speak a command.
Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. Voice commands cannot be accepted
when the icon is
.
. The list displayed can be scrolled by
tilting the menu control switch on the
steering wheel.
. If the command is not recognized, the
system announces, “ Please say again ” .
Monitor, climate, audio, phone and voice recognition systems
4-137

Black plate (317,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SAA2549
Speaker adaptation function (for
Alternate Command Mode) GUID-DBDF0349-2C2D-40F9-A5F6-3217F79D5D3E
The voice recognition system has a func-
tion to learn the user ’ s voice for better
voice recognition performance. The system
can memorize the voices of up to three
persons.
Having the system learn the user ’ s voice: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the SETTING button on the instru-
ment panel and select the “ Others ”
key.
2. Select the “ Voice Recognition ” key.
3. Select the “ Speaker Adaptation ” key. SAA2550
4. Select the user whose voice is memor-
ized by the system.
5. Select the “ Start Speaker Adaptation
Learning ” key. SAA2551
6. Select a category to be learned by the
system from the following list. .
Phone Commands .
Navigation Commands .
Information Commands .
Audio Commands .
Help Commands
The voice commands in the category
are displayed.
7. Select a voice command and then push
the ENTER button.
The voice recognition system starts.
Monitor, climate, audio, phone and voice recognition systems
4-139

Black plate (318,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-140 Monitor, climate, audio, phone and voice recognition systems SAA2552
8. The system requests that you repeat a
command after a tone.
9. After the tone sounds and the icon on
the screen changes from
to ,
speak the command that the system
requested.
10. When the system has recognized the
voice command, the voice of the user is
learned.
Push the
switch or BACK button to
return to the previous screen.
If the system has learned the command
correctly, the voice command status on the
right side of the command turns from “ None ” to “ Stored ” .
SAA2553
Speaker Adaptation function settings: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Edit User Name
Edit the user name using the keypad
displayed on the screen.
Delete Voice Data
Resets the user ’ s voice that the voice
recognition system has learned.
Continuous Learning
When this item is turned to ON, you can
have the system learn the voice commands
in succession, without selecting com-
mands one by one.

Black plate (320,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-142 Monitor, climate, audio, phone and voice recognition systemsTROUBLESHOOTING GUIDE GUID-35425524-373A-4C9E-9E81-95955D5BB57B
The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in
this guide for the appropriate error.
Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message Solution
Displays “ COMMAND NOT RECOGNIZED ” or the
system fails to interpret the command correctly. 1. Ensure that the command format is valid, see “ Command List ” (P.4-121).
2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level.
3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost on.
NOTE:
If it is too noisy to use the phone, it is likely that voice commands will not be recognized.
4. If optional words of the command have been omitted, then the command should be tried with these in place.
The system consistently selects the wrong voicetag in
the phonebook. 1. Ensure that the voicetag requested matches what was originally stored. (See “ Bluetooth ®
Hands-Free Phone
System (models with navigation system) ” (P.4-90).)
2. Replace one of the voicetags being confused with a different voicetag.

Black plate (325,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]minute and then remain continuously
illuminated. This sequence will continue
upon subsequent vehicle start-ups as long
as the malfunction exists. When the mal-
function indicator is illuminated, the sys-
tem may not be able to detect or signal low
tire pressure as intended. TPMS malfunc-
tions may occur for a variety of reasons,
including the installation of replacement or
alternate tires or wheels on the vehicle that
prevent the TPMS from functioning prop-
erly. Always check the TPMS malfunction
telltale after replacing one or more tires or
wheels on your vehicle to ensure that the
replacement or alternate tires and wheels
allow the TPMS to continue to function
properly.
Additional information GUID-80EA0255-F871-460E-BDF5-E3C4E75931D0
. The TPMS does not monitor the tire
pressure of the spare tire.
. The TPMS will activate only when the
vehicle is driven at speeds above 16
MPH (25 km/h). Also, this system may
not detect a sudden drop in tire
pressure (for example a flat tire while
driving).
. The low tire pressure warning light does
not automatically turn off when the tire
pressure is adjusted. After the tire is inflated to the recommended pressure,
the vehicle must be driven at speeds
above 16 MPH (25 km/h) to activate the
TPMS and turn off the low tire pressure
warning light. Use a tire pressure gauge
to check the tire pressure.
. The CHECK TIRE PRESSURE warning
appears on the dot matrix liquid crystal
display when the low tire pressure
warning light is illuminated and low
tire pressure is detected. The CHECK
TIRE PRESSURE warning turns off when
the low tire pressure warning light
turns off.
The CHECK TIRE PRESSURE warning
does not appear if the low tire pressure
warning light illuminates to indicate a
TPMS malfunction.
. Tire pressure rises and falls depending
on the heat caused by the vehicle ’ s
operation and the outside temperature.
Low outside temperature can lower the
temperature of the air inside the tire
which can cause a lower tire inflation
pressure. This may cause the low tire
pressure warning light to illuminate. If
the warning light illuminates in low
ambient temperature, check the tire
pressure for all four tires. For additional information, see “ Low tire
pressure warning light ” (P.2-15) and “ Tire
Pressure Monitoring System (TPMS) ” (P.6-
2).
WARNING . If the low tire pressure warning light
illuminates while driving, avoid sudden
steering maneuvers or abrupt braking,
reduce vehicle speed, pull off the road to
a safe location and stop the vehicle as
soon as possible. Driving with under-
inflated tires may permanently damage
the tires and increase the likelihood of
tire failure. Serious vehicle damage
could occur and may lead to an accident
and could result in serious personal
injury. Check the tire pressure for all
four tires. Adjust the tire pressure to the
recommended COLD tire pressure shown
on the Tire and Loading Information
label to turn the low tire pressure
warning light OFF. If the light still
illuminates while driving after adjusting
the tire pressure, a tire may be flat. If
you have a flat tire, replace it with a
spare tire as soon as possible. (See “ Flat
tire ” (P.6-2) for changing a flat tire.)
Starting and driving
5-5

Black plate (329,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]in drivetrain damage or unexpected
vehicle movement which could result in
serious vehicle damage or personal
injury.
. Do not attempt to test an AWD equipped
vehicle on a 2-wheel dynamometer,
(such as the dynamometers used by
some states for emissions testing), or
similar equipment even if the other two
wheels are raised off the ground. Make
sure you inform test facility personnel
that your vehicle is equipped with AWD
before it is placed on a dynamometer.
Using the wrong test equipment may
result in drivetrain damage or unex-
pected vehicle movement which could
result in serious vehicle damage or
personal injury.
. When a wheel is off the ground due to an
unlevel surface, do not spin the wheel
excessively. GUID-A0F35CA1-ADE1-478F-ABDB-FB4DD4BF0426
WARNING Do not operate the push-button ignition
switch while driving the vehicle except in an
emergency. (The engine will stop when the
ignition switch is pushed 3 consecutive
times or the ignition switch is pushed and
held for more than 2 seconds.) If the engine
stops while the vehicle is being driven, this
could lead to a crash and serious injury.
Before operating the push-button ignition
switch, be sure to move the selector lever
to the P (Park) position (for automatic
transmission model) or the shift lever to
the N (Neutral) position (for manual trans-
mission model).
INTELLIGENT KEY SYSTEM GUID-5C22F5F0-8E63-49DB-8E3C-09EA9AB0E315
The Intelligent Key system can operate the
ignition switch without it being taken out
from your pocket or purse. The operating
environment and/or conditions may affect
the Intelligent Key system operation.
Some indicators and warnings for opera-
tion are displayed on the dot matrix liquid
crystal display between the speedometer
and tachometer. (See “ Dot matrix liquid crystal display ” (P.2-20).)
CAUTION . Be sure to carry the Intelligent Key with
you when operating the vehicle.
. Never leave the Intelligent Key inside the
vehicle when you leave the vehicle.
. If the vehicle battery is discharged, the
ignition switch cannot be switched from
the LOCK position. Charge the battery as
soon as possible. (See “ Jump starting ”
(P.6-8).)
Starting and driving
5-9PUSH-BUTTON IGNITION SWITCH