2012 HONDA INSIGHT Technology Reference Guide

V O I C E R E C O G N I T I O N( i f e q u i p p e d )To keep your eyes on the road and hands on the wheel, use voice commands for
hands\bfree calling, navigation, audio, and climate control. For a full list of all system
commands, say“Information” and “Voice Command Help. ”
Key Functions by Voice Command
B L U E T O O T H®H A N D S F R E E L I N K®p. 23
A U D I Op.\f9
C L I M A T Ep .\f9
N A V I G A T I O Np. 20
Voice Command Tips
• Press and release the Talk button, wait for a beep, then give a command.
• All available voice commands are highlighted in blue when you press the Talk button.
• For a list of available commands, press and releasethe Talk button and say
“Help” at any time.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
• The system also uses a touch screen display. You can select options or icons by touching them on the screen. This is limited while the vehicle is moving.
PickUp button\f Answer an incoming call,
or go directly to the Phone screen.
Talk button\f Give navigation, HFL, audio
or climate control commands.
HangUp button\f End a call or decline a
call.
Back button\f Cancel a command and
return to the previous screen.
\f4\f5
Control four different systems with the steering wheel buttons and the ceiling
microphone.
To prevent driver distraction, certain manual and touch screen functions
may be inoperable or grayed out while the vehicle is moving. Voice
commands are always available.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f39 AM Page 9

Press and release the Talk button before you give a command.Press and release the Talk button before you give a command.
Commonly Used Voice Commands
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
Press and release the Talk button before you give a command.
Locate Points of Interest
Saya command like “Display
restaurant” to see restaurant
icons appear on the map.
Say a command like “Display gas
stations” to see gas station icons
appear on the map.
Get Navigation Route
Information
After a destination is entered,
say “How far to the destination?”
to hear the remaining distance.
Say “Display entire route” to see
the routing method the system
mapped for your destination.
Press and release the Talk button before you give a command.
Make Audio Selections
Say a command like “Radio 97.1
FM” to select that station.
Saya command like “DISC play
track 1” to hear that song on a
currently inserted CD.
Adjust the Vehicle’s
Climate Setting
Say a command like “Air
conditioner on” to start the
air conditioning system.
Say a command like “Fan speed
\f” to adjust the fan speed.
\f6\f7
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f39 AM Page 10

Commonly Used Voice Commands (continued)
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
Press and release the Talk button before you give a command.
G e n e r a l C o m m a n d s(Accepted on most screens to change displays)
• Display map
• Display menu
• Display information
• Display audio
• What time is it?
• Next/previous
(to change pages)• Left/right(to change tabs)• Up/down(to scroll lists up to three pages)
F i n d P l a c e C o m m a n d s(Accepted on Map screen)
• Find nearest: \b ATM \b Honda dealer
\b gas station \b airport
\b Mexican \b hospital restaurant \b bank
\b post office
N a v i g a t i o n C o m m a n d s(Accepted on Map screen)
• How long/far to the destination?
• Display destination map
• Display entire route
D i s p l a y C o m m a n d s(Accepted on Map screen)
• Display/Hide: \b ATM
\b gas station
\b restaurant
\b post office
• Display north up/heading up
• Zoom in/out
• Go home
• Display current location
Press and release the Talk button before you give a command.
A u d i o C o m m a n d s(Accepted on most screens)
• Audio on
• Radio # FM/AM
• Radio preset \f/2/3/4/5/6
• DISC/USB/iPod play
• DISC/USB/iPod skip forward/back
• Auxiliary (AUX) play
H e l p C o m m a n d s(Accepted on most screens)
• Help (list of available commands for current screen)
• Voice command help \b from INFO screen (list of all
available navigation and audio
commands)
\f8\f9
C l i m a t e C o n t r o l C o m m a n d s(Accepted on most screens)
• Air conditioner on/off
• Rear defrost on/off
• Climate control recirculate/ fresh air
• Fan speed up/down
• Temperature # degrees (# = 57–87)
• Temperature max hot/cold
P h o n e C o m m a n d s(Accepted on Phone screen)
• Dial
• Speed Dial \f (or 2)
• Redial
• Phonebook
• Phone setup
(Accepted on any screen)
• Dial by number
• Dial by voice tag
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f39 AM Page 11

N A V I G A T I O N( i f e q u i p p e d )Real\btime navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
202\f
Map Screen Legend
Using the Find Nearest CommandEntering a Destination Using Voice Commands
Press and release the Talk button before you give a command.
Find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
Press and release the Talk button before you give a command.
\f. Say “Display menu. ”
Say “Address.”
2. Say “Street,” thensaythe street
name on the next screen. Do
not include the direction (N, S, E,
W) or type (St., Ave., Blvd., etc.).
3. A list of street names appears. Say the number next to the
street you want to select. 4.
Say the entire street address
number, followed by “OK”if
necessary. For example, “123
\f OK.”
5. If the street address is in more than one city, a list of city names
appears. Saythe number next to
the city you want to select.
6. The system displays the “Calculate route to” screen.
Say “Set as destination” to set
the route. \f. From the map screen,
say
“Find nearest ATM.”
2. A list of the nearest ATMs in
your area is displayed by
shortest distance to destination.
3.Say the number next to the
destination you want to select.
4. The system displays the “Calculate route to” screen.
Say “Set as destination” to set
the route.
Direction of destination
Calculated route Distance to go
Time to go
Current vehicle
location
Set a destination using a street address. For other destination options, see your
Navigation Manual.
NOTE\f If menu options are grayed out, they are only available using voice
commands. It is recommended that you enter your destination before driving or
when the vehicle is stopped.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f40 AM Page 12

FM Traffic
Press and release the Talk button before you give a command.
Displaying Traffic Information
\fay“Display traffic” to view highway flow data.
Occasionally, a green line may appear
indicating freeflow traffic.
NOTE:Traffic flow and incident icons are
only displayed on map scales of 5 miles
(8 km) or less.
\beavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data Incident
icon
Incident
icon
Incident
Traffic Icons
Construction
Road closed
Weather
Provides continuously updated information, including traffic speed, incidents, and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
1.\fay “Display traffic list” to view
a list of incidents on your route.
3. \fay “\bvoid,” and the incident
list returns.
\b. \fay “\feroute” to set the new
route.
Traffic ReroutingThe system can automatically provide detours around traffic or incidents
when a destination is set.
2223
2. \fay the number of the incident
you want to avoid. When the
incident appears, say“Traffic
detail.”
BLU\bTOOTH®HANDSFR\b\bLIN\f®( H F L )(models without navigation)
How to Use HFL
Pairing Your Phone
\bFL Talk button: Give HFL
commands or answer incoming calls.
\bFL Back button: \fnd a call, go back
to the previous command, or cancel an
operation.
Place and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is compatible.
Press and release the HFL Talk button before you give a command.
1.Enable Discovery mode on
your compatible phone.
PAIR
0000
2. \fay “Phone setup,” thensay
“Pair.”
3. HFL gives you a fourdigit code that also appears on the
MID. 5. HFL asks you to name the
phone. For example, say
“Mary’s phone.” The phone is
now added.
\b. \fearch for HandsFreeLink
from your phone, and enter
the code when prompted.
Connect to HFL.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 1\f18 PM Page 13

Press and release the HFL Talk button before you give a command.
Making a Call
\f.Press the HFL Talk button.
2. Say “Call” or“Dial” and the
desired phone number. 3.
Press the HFL Talk button, and
say “Call” or“Dial” to continue.
Receiving a Call
CALL
3105551234
2. Press the HFL Talk button to
accept the call.
3. Press the HFL Back button to
end or decline the call.
4. The call is connected and heard through the vehicle’s speakers.
IN USE
\f. A notification is heard andthe incoming phone number
appears on the MID.
INCOMING
CALL
3105551234
2425
Press and release the HFL Talk button before you give a command.
HFL Phonebook
\f. Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used
as speed dials.
2.Say “Store.” 3.
Say the name of the contact,
and then the phone number.
STORE
STORE
3105551234
4. To call a contact once an entry is stored, say“Call Mike.”
CALL
3105551234
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f40 AM Page 14

2627
BLUETOOTH®HANDSFREELINK®( H F L )(models with navigation)
Place and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.comto check if your phone is compatible.
To prevent driver distraction, certain manual and touch screen functions
may be inoperable or grayed out while the vehicle is moving. Voice
commands are always available.
Pr ess and rel ease theTalk button beforeyou giveacommand.
1. Press the PickUp button to
go to the Phone screen.
If a prompt appears asking to
connect to a phone, say“No”
and go to step 2. 5. Make sure your phone is in
Discovery mode, and say“OK.”
6. HFL searches for your phone. Say
the number next to the phone
when it appears on the list.
7. HFL gives you a fourdigit code. Enter it on your phone when
prompted. The phone is now
paired.
If your phone does not appear:
Say
“Find Another Phone” and
search for HandsFreeLink from
your phone. Connectto HFL.
2.Say “Phone setup.”
3.Say “Add a phone.”
4.Say “Search.”
Pairing Your Phone (continued)
PickUp button: Answer an incoming call, or
go directly to the Phone screen.
Talk button: Give HFL commands.
Back button: Cancel a command and return
to the previous screen.
HangUp: End a call or decline a call.
How to Use HFL
Press and release the Talk button before you give a command.
1.Press the PickUp button to
go to the Phone screen. A
prompt appears. Say“Yes.”
2. Make sure your phone is in discovery mode, and say“OK.” If your phone does not appear:
Select
“Find Another Phone” and
search for a HandsFreeLink
device from your phone.
Connect to HFL.Goto step 4.
3. HFL searches for your phone.
Select it when it appears on the
list. Go to step 4. 4. HFL gives you a fourdigit code.
Enter it on your phone when
prompted. The phone is now
paired.
Pairing Your Phone
Use this pairing method when no phone has ever been paired to the system.You
can only pair your Bluetooth\bcompatible phone when the vehicle is stopped. Use this pairing method when a phone has already been paired to the system, or
when you want to pair an additional phone.
12 Insight TRG\fATG_NEW STYLE 8/5/2011 10\f41 AM Page 15

2829
Press and release the Talk button before you give a command.
1.Press the PickUp button to
go to the Phone screen.
2. Say “Dial.”3.Say the entire phone number,
then say“Dial” to call.
4. The call is connected and heard through the vehicle speakers.
Dialing a Number
Receiving a Call
3.Press the Hang\bUp button to
end or decline the call.\f. A notification is heard and the incoming phone number
appears on the navigation
screen.
Press and release the Talk button before you give a command.
2.Say “Phonebook.”
1.Press the PickUp button
to go to the Phone screen. 3.
Scroll through the list to find
the name and number you want
to call. Say“Dial,” orpress the
PickUp button to call.
4. The call is connected and heard through the vehicle speakers.
Using the Phonebook
When your phone is paired, its entire phonebook is automatically imported to
the system.
Enter a \f0\bdigit phone number to call.
Using Speed Dial
When a speed dial entry is stored with a voice tag, you can make a call using
voice commands at any time*. See your Navigation Manual for more information.
2. Press the Pick\bUp button to
accept the call.
Press and release the Talk button before you give a command.
3. The call is connected and heard through the vehicle speakers.
\f.
Press the Pick\bUp button
to go to the Phone screen. If an entry has a stored voice tag,
say
“Dial by voice tag,” followed
by the voice tag name and “Dial”
from any screen.
2. Say “Speed Dial 1” (or“Speed
Dial 2”) and the number next
to the entry. For example,
“One.” Say“Call,” orpress the
Pick\bUp button to call.
*When voice tags are stored, you can press the Talk button and say “Dial by voice tag” from any screen. Follow the system prompts to make a call.
12 Insight TRG\fATG_NEW STYLE 11/4/2011 11\f05 AM Page 1\b