R E A R V I E W C A M E R A
How It Works
• When you shift into Reverse (R), a real\btime image of the area behind yourvehicle is shown in the navigation display, along with helpful parking guide lines.
• The display turns off when you shift out of Reverse.
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver's seat and mirror position into memory for each remote transmitter.
Programming DPMS
Note\b A stored memory position is linked to the corresponding keyless remote (\f or 2).
Each item begins to adjust when you unlock the driver’s door with the remote and enter
the vehicle.
\f. Turn the ignition switch to ON (II).
Shift into Park (P).
2. Adjust your preferred seat and
outside mirror settings. 3.
Press the SET button. You will
hear a beep.
4. Press the memory button
corresponding to the remote
(\f or 2) you are using. You will
hear two beeps.
8\f
Model\f w\bthout nav\bgat\bon Model\f w\bth nav\bgat\bon
P\fess and ho\bd
the power button for
3 secon\fs. Repeatto turn back on. P\fess and ho\bd
CA\bCEL for 3
secon\fs. Repeatto turn back on.
Turning the Guide Lines On or Off
Model\f w\bthout nav\bgat\bon Model\f w\bth nav\bgat\bon
12 Crosstour TRG\fATG_NEW STYLE \b/30/2011 9\f44 AM Page \b
