Malfunction IndicatorsIf an indicator remains on\b there may be a problem; see your dealerOn\bOff Indicators
Condition IndicatorsAction is needed by driver
PASSENGER AIRBAGOFF(above Hazard Warning button)
SIDE AIRBAGOFF
VSA OFF
CRUISE CONTROL on
Fuel economy on* Fog lights
on*
Headlights on
Turn signals/hazards on
CRUISE MAIN on
High beamson
*if equipped
Charging system
Low brake fluid\b Brake system
Low oil pressure ABS(anti lock brake system)
DRL(daytime running lights)
Malfunction lamp(check engine light)
TPMS(tire pressure monitoring system)
VSA®(vehicle stability assist)
SRS(supplemental restraint system)
Parking brake on:
Release
Door/Trunk open:
Close door(s) / trunk
Seat belt reminder:
Fasten seat belt(s) Low fuel:
Refill
Low tire pressure:
Add air
Maintenance Minder
TM:
Make dealer appointment
INSTRUMENT PANEL INDICATORS
Immobilizer
Flashes: improperly coded key;
use correct key
Briefly appear with each engine start. Red and amber indicators are most critical. Blue
and green indicators are used for general information.
45
PASSENGER AIRBAG
OFF
ECO
12 Accord 4D TRG\fATG_NEW STYLE 7/19/2011 3\f29 PM Page 4
2021
Press and release the HFL Talk button before you give a command.
HFL Phonebook
1.Say “Phonebook.”
Store up to 5\f names and their phone numbers\b which can be used
as speed dials.
2.Say “Store.” 3.
Say the name of the contact\b
and then the phone number.
4. To call a contact once an entry is stored\b say“Call Mike.”
Press and release the Navi Talk button before you give a command.
Cellular Phonebook *(models with navigation)
1. Say “Display Information.”
Say “Cellular Phone.”
Import your entire cell phone’s address book to the navigation system.
*not available on all phones
2.
Say “Import Cellular Phonebook.” 3. HFL begins to import your
contacts to the system.4. To call a contact\b say“Search
Imported Phonebook” and select
the name and number.
H O M E L I N K®(if equipped)
The HomeLink Universal Transceiver can be programmed to operate up to three
remote controlled devices around your home\b such as garage doors\b lighting\b or home
security systems.
Press and hold thebutton on the
remote and the HomeLin kbutton at
the same time. Th en, while
continuing to hold the HomeLink
button, press and release thebutton
on the remote every 2seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, pressand
hold the programmed HomeLink
button for 2 seconds.a
Press and hold theprogrammed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink\b see the owner’s manual included
with the device you are trying to program\b call HomeLink at (8\f\f) 355 3515\b or
visit www.homelink.com .
12 Accord 4D TRG\fATG_NEW STYLE 7/19/2011 3\f32 PM Page 12
