2012 FORD ESCAPE parking brake

[x] Cancel search: parking brake

Page 226 of 361

FORD ESCAPE 2012 2.G Owners Manual To return to normal D (Drive) position (with O/D), press the
transmission control switch again.
•The grade assist lamp in the instrument cluster will not be illuminated.
•The transmission will ope

Page 228 of 361

FORD ESCAPE 2012 2.G Owners Manual Parking your vehicle
1. Apply the brake and shift into the neutral position.
2. Fully apply the parking brake, hold the clutch pedal down, then shift
into 1 (First).
3. Turn the ignition off.
WARNING:

Page 232 of 361

FORD ESCAPE 2012 2.G Owners Manual Servicing
•If the image comes on while the vehicle is not in R (Reverse), have
the camera inspected by your authorized dealer.
•If the image is not clear, then check if there is anything covering

Page 239 of 361

FORD ESCAPE 2012 2.G Owners Manual If your vehicle goes off the edge of the pavement
•If your vehicle goes off the edge of the pavement, slow down, but
avoid severe brake application, ease the vehicle back onto the
pavement only afte

Page 240 of 361

FORD ESCAPE 2012 2.G Owners Manual WARNING:If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
WARNING:Do not spin the wheels at ov

Page 252 of 361

FORD ESCAPE 2012 2.G Owners Manual The high-current fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingProtected Circuits
A 80A Midi Electronic power steering module
(EPAS)
B 125A Midi Passenger compartment fuse
panel
1 15A*

Page 257 of 361

FORD ESCAPE 2012 2.G Owners Manual Stopping and securing the vehicle
1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual t

Page 259 of 361

FORD ESCAPE 2012 2.G Owners Manual 6. If not replacing the spare or flat
tire to the underbody storage area,
raise winch up into the installed
position.
7. Use the attached fastener strap
(2) to tie the tether end to the
winch actuator
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >