Page 305 of 332

Use of fuel with Ethanol content higher
than 10% may result in engine malfunc-
tion, starting and operating difficulties,
and materials degradation.These adverse effects
could result in permanent damage to your vehicle.
Clean Air Gasoline
Many gasolines are now being blended to contribute to
cleaner air, especially in those areas where air pollution
levels are high. These new blends provide a cleaner
burning fuel and some are referred to as “reformulated
gasoline.”
The manufacturer supports these efforts toward
cleaner air. You can help by using these blends as they
become available.
MMT In Gasoline
MMT is a manganese containing metallic additive that is
blended into some gasoline to increase octane. Gaso-
line blended with MMT provides no performance ad-
vantage beyond gasoline of the same octane number
without MMT. Gasoline blended with MMT reduces
spark plug life and reduces emission system perfor-
mance in some vehicles. The manufacturer recom-
mends that gasoline without MMT be used in your
vehicle. The MMT content of gasoline may not be
indicated on the gasoline pump; therefore, you should
ask your gasoline retailer whether or not his/her gaso-
line contains MMT. Materials Added To Fuel
Besides using unleaded gasoline with the proper octane
rating, gasolines that contain detergents, corrosion and
stability additives are recommended. Using gasolines
that have these additives will help improve fuel
economy, reduce emissions, and maintain vehicle per-
formance.
Indiscriminate use of fuel system cleaning agents should
be avoided. Many of these materials intended for gum
and varnish removal may contain active solvents or
similar ingredients. These can harm fuel system gasket
and diaphragm materials.
WARNING!
Carbon monoxide (CO) in exhaust gases
is deadly. Follow the precautions below
to prevent carbon monoxide poisoning:
Do not inhale exhaust gases.They contain car-
bon monoxide, a colorless and odorless gas,
which can kill. Never run the engine in a closed
area, such as a garage, and never sit in a parked
vehicle with the engine running for an extended
period. If the vehicle is stopped in an open area
with the engine running for more than a short
period, adjust the ventilation system to force
fresh, outside air into the vehicle.
(Continued)
299
KNOWING
YOURVEHICLE SAFETY
STARTING ANDDRIVING
WARNING LIGHTSAND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
CARETECHNICAL
SPECIFICATIONSCONTENTS
Page 306 of 332
(Continued)
Guard against carbon monoxide with proper
maintenance. Have the exhaust system inspected
every time the vehicle is raised. Have any abnor-
mal conditions repaired promptly. Until re-
paired, drive with all side windows fully open.
Keep the liftgate closed when driving your ve-
hicle to prevent carbon monoxide and other poi-
sonous exhaust gases from entering the vehicle. FUEL REQUIREMENTS — DIESEL ENGINE
Use Premium Quality Diesel fuels with a Cetane rating
of 50 or higher, and meeting the EN590 standard are
highly recommended. See your authorized dealer for
further information regarding fuels available in your
area.
300
KNOWING YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTSAND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
CARETECHNICAL
SPECIFICATIONSCONTENTS
Page 307 of 332
FLUID CAPACITIES
Metric
Fuel (Approximate) 77.6 Liters
Engine Oil with Filter
3.6L Engine 5.6 Liters
2.0L Diesel Engine 5.2 Liters
Cooling System *
3.6L Engine and Single- or Dual-Zone Climate Control System 12.4 Liters
3.6L Engine and Three-Zone Climate Control System 13.7 Liters
2.0L Diesel Engine and Single- or Dual-Zone Climate Control System 9.1 Liters
2.0L Diesel Engine and Three-Zone Climate Control System 9.9 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
301
KNOWING
YOURVEHICLE SAFETY
STARTING ANDDRIVING
WARNING LIGHTSAND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
CARETECHNICAL
SPECIFICATIONSCONTENTS
Page 308 of 332
FLUIDS, LUBRICANTS, AND GENUINE PARTS ENGINEComponent Fluids, Lubricants, and Genuine Parts
Engine Coolant50% mixture of demineralized water and PARAFLU UP* that meets FIAT
Qualification 9.55523 Antifreeze/Coolant or equivalent.
Engine Oil – 3.6L Engine SAE Grade 5W-30 SELENIA K POWER fully synthetic engine oil that meets
FIAT Qualification 9.55535 API SN, ILSAC GF-5 or equivalent.
Engine Oil – 2.0L Diesel Engine SAE Grade 5W-30 SELENIA WR P.E fully synthetic engine oil that meets FIAT
Qualification 9.55535–S1 or equivalent.
Spark Plugs – 3.6L Engine RER8ZWYCB4 (Gap 1.1 mm)
Fuel Selection – 3.6L Engine 91 Octane
Fuel Selection – 2.0L Diesel Engine 50 Cetane or higher (Less than 15 ppm Sulfur).
302
KNOWING YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTSAND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
CARETECHNICAL
SPECIFICATIONSCONTENTS
Page 309 of 332

CHASSISComponent Fluid, Lubricant, or Genuine Part
Automatic Transmission (for
versions/markets, where provided)TUTELA TRANSMISSION FORCE4 Totally synthetic lubricant that meets FIAT
Classification 9.55550- AV4
Manual Transmission (for
versions/markets, where provided) Grade SAE 75W synthetic lubricant that meets Qualification FIAT
9.55550-MZ6 (TUTELA TRANSMISSION GEARFORCE Contractual Technical
Reference No. F002.F10).
Wheel-Side Constant Velocity Joints Molybdenum disulphide grease, for use at high temperatures. FIAT 9.55580
certification. NL.GI. 1-2 consistency (TUTELA ALL STAR Contractual
Technical Reference No. F702.G07)
Differential-Side Constant Velocity
Joints Grease for constant-velocity joints with low friction coefficient. FIAT 9.55580
certification. NL.GI. 0-2 consistency (TUTELA STAR 700 Contractual Technical
Reference No. F701.C07)
Brake/Clutch Master Cylinder Synthetic fluid, FMVSS no. 116, DOT 4, ISO 4925 SAE J-1704. Qualification
FIAT 9.55597 (TUTELA TOP 4 Contractual Technical Reference No. F001.A93)
Power Steering Reservoir Please refer to your Dealership.
Windshield/Rear Window Washer Fluid Mixture of alcohol, water and surfactants CUNA NC 956-II FIAT 9.55522
certification (TUTELA PROFESSIONAL SC35 Contractual Technical Reference
No. F201.D02)
303
KNOWING
YOURVEHICLE SAFETY
STARTING ANDDRIVING
WARNING LIGHTSAND
MESSAGES
IN AN
EMERGENCY
SERVICING AND
CARETECHNICAL
SPECIFICATIONSCONTENTS
Page 310 of 332

ARRANGEMENTS FOR DEALING WITH THE VEHICLE AT THE END OF ITS LIFE
FIAT has been committed for many years to safeguarding the environment through the constant improvement of its
production processes and manufacturing products that are increasingly “eco-compatible”.
To give customers the best possible service in terms of respecting environmental laws and in response to European
Directive 2000/53/EC governing vehicles at the end of their life, FIAT is offering its customers the opportunity of handing
over their vehicle* at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any
expenses as a result of it having a zero or negative market value.
In all European Union countries, until 1st January 2007, only vehicles registered after 1st July 2002 were collected free of
charge, while since 2007 collection has been free of charge irrespective of the year of registration as long as the vehicle
contains its basic components (in particular, the engine and bodywork) and has no additional waste.
To hand your vehicle over at the end of its life without extra cost, go to one of our Dealerships or FIAT-authorized
collection and scrapping centres.
These centres have been carefully chosen to offer high quality service for the collection, treatment and recycling of unused
vehicles with respect to the environment.
You can find further information on these collection and scrapping centres either from a FIAT or FIAT Commercial Vehicle
Dealership or by calling the freephone number 00800 3428 0000 or by going on the FIAT website.
(*) Vehicle for transporting passengers with a maximum of nine seats and a total permitted weight of 3.5 t304
Page 311 of 332
Page 312 of 332