FLUIDS AND CAPACITIES
ComponentFluid, Lubricant, or
Genuine PartCapacities
Engine Coolant 1.4L Turbo MOPAR
®Antifreeze/Engine
Coolant 10
Year/152,000 Mile Formula
OAT (Organic Additive
Technology) or equivalent
meeting the requirements
of Chrysler Material
Standard MS-12106. 4.6 Quarts (4.4 Liters)
Engine Oil with Filter 1.4L
Turbo API Certified SAE 5W-40
Full Synthetic Engine Oil,
meeting the requirements
of Chrysler material
standard MS-10896.4 Quarts (3.8 Liters)
Engine Oil Filter MOPAR
®Engine Oil Filter
or equivalent. —
Fuel Selection 1.4L Turbo 91 Octane Recommended – 87 Octane Acceptable10.5 Gallons (40 Liters)
(Approximate)
Manual Transmission MOPAR
®C635 DDCT/MTX
Transmission Fluid —
Brake Master Cylinder MOPAR
®DOT 3, SAE
J1703 should be used. If
DOT 3, SAE J1703 brake
fluid is not available, then
DOT 4 is acceptable. Use
only recommended brake
fluids or equivalent. —
Spark Plugs SIKR9A7 Gap 0.026 in
(0.65 mm) —
MAINTAINING YOUR VEHICLE
57
MAINTENANCE CHART
Miles:
8,000 16,000 24,000 32,000 40,000 48,000 56,000 64,000 72,000 80,000 88,000 96,000 104,000
Or Months: 6 12 18 24 30 36 42 48 54 60 66 72 78
Or Kilometers:
13,000 26,000 39,000 52,000 65,000 78,000 91,000 104,000 117,000 130,000 143,000 156,000 169,000
Change the engine oil and filter. XXXXXXXXXXXXX
Rotate the tires, rotate at the first sign of irregular
wear, even if it occurs before scheduled maintenance. XXXXXXXXXXXXX
If using your vehicle for any of the following: dusty or
off-road conditions. Inspect the engine air cleaner fil-
ter; replace if necessary. XXX
Inspect the brake linings; replace if necessary. X X X X X X
Inspect the CV joints. X X X X X X
Inspect the exhaust system. X X X X X X
Inspect the front suspension, tie rod ends and boot
seals for cracks or leaks and all parts for damage,
wear, improper looseness or end play; replace if nec-
essary. XXXXXX
Replace the engine air cleaner filter. X X X
Replace cabin filter. X X X X X X
Clean and lube sun roof tracks. X X X X X X
Check and adjust hand brake. X X X
Replace the spark plugs X X X
Inspect and replace PCV valve if necessary. X
Flush and replace the engine coolant at 60 months or
104,000 miles (169,000 km) whichever comes first. X
Flush and replace the engine coolant at 104,000 miles
(169,000 km) or 60 months whichever comes first. X• Refer to the Owner's Manual on the DVD for the complete maintenance schedule.
• On vehicles equipped with 17” summer tires, more frequent tire rotation may be necessary to achieve optimal tread wear, and tire
rotation at each oil change indicator message is recommended.
MAINTAINING YOUR VEHICLE
58