2012 FIAT 500 ABARTH ESP

In addition, you can use other calling features, such as
responding to incoming calls, re-dial, callback, call wait-
ing, reading a message or deleting it.
NOTE:
•If you encounter difficulties with any of the voice
recognition operations, refer to HANDS-FREE COM-
MUNICATION PACKAGE - TROUBLESHOOTING.
•Before you can make and receive phone calls using the
hands-free communication package, you must create a
pairing relationship for your mobile phone.
•For further information refer to SETTING FUNC-
TIONS – PAIRING A MOBILE PHONE.
•To activate the hands-free communication package,
the ignition key must be turned to the ON position.
•If during a phone call you turn the ignition key to
STOP, you can continue your conversation through the
hands-free communication package for another15 minutes. After 15 minutesBLUE&ME™will sound
a warning tone and will transfer the call to the mobile
phone.
Making a Phone Call
You can make a phone call using one of the following
methods:
•Calling a contact in your phonebook
•Dialing a phone number using voice commands
•Dialing a phone number using the mobile phone
keypad
•Calling a phone number using call history (recent
calls)
•Calling the sender of a received SMS message
NOTE:For further information refer to FUNCTIONS
OF SMS MESSAGES READER, paragraph SMS MES-
SAGES MANAGEMENT
32 BLUE&ME™ User’s Manual

Dialing a phone number using voice commands
To dial a phone number using voice interaction, proceed
as follows:
Press the
steering wheel button and say“Dial”.
The system will respond with“Number, please”.
Say the phone number as a sequence of single digits (e.g.,
“0”, “1”, “2”, “3”, “4”, “5”, “6”, “7”, “8”, “9”, “+” (plus),
“#” (pound) or “*” (star).
For example, 248 555 1212 has to be said as: “two, four,
eight, five, five, five, one, two, one, two”.
The system will repeat the complete phone number and
display it.
If the number is complete, say“Dial”or press the
/MAINbutton on the steering wheel to start the call.
If you have not finished speaking the phone number,then say the remaining digits and then say“Dial”or
press the
/MAINbutton on the steering wheel to start
the call.
The system will start the call to the displayed phone
number.
To end the phone call, press thePHONE HANG UP
button on the steering wheel.
You can say the sequence of phone number digits in
“digit groups” which allows you to verify the recognized
number in several small portions. Digit groups are cre-
ated by the pauses you use while pronouncing the
sequence of digits. If you pause after pronouncing sev-
eral digits, a digit group is created. The system will
repeat the recognized digits.
If the spoken digits are correct, you can continue pro-
nouncing the phone number. If the spoken digits are
incorrect, you can delete the digit group by saying
1
BLUE&ME™ User’s Manual 35

•Conduct the conversation using the hands-free com-
munication system.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel, or end the phone call
from your mobile phone keypad.
Calling a phone number using call history (recent
calls)
RECENT CALLSoption is a list of the recent calls made
or received. It can consist of up to ten incoming calls, up
to ten outgoing calls and up to five missed calls.
To dial a phone number using manual interaction, pro-
ceed as follows:
•Press the/MAINbutton on the steering wheel to
open the Main Menu.
•SelectRECENT CALLSand then press thePRESET
UP/OKbutton on the rear of the steering wheel.
•The system will present a list of phone numbers. Use
the Scan up/Scan down buttons to select the required
phone number. Then press thePRESET UP/OKbutton
on the rear of the steering wheel or the
/MAIN
button on the steering wheel to start the call.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Or, using voice interaction:
To call back the last incoming phone number, press the
steering wheel button and say“Call back”.
The system will display information about the last caller
and ask if you would like to call back this contact. To
respond with “yes”, say“Yes”,otherwise say“No”.
1
BLUE&ME™ User’s Manual 37

To redial the last phone number you called, say“Redial”.
The system will display information about the last con-
tact you called and will ask if you would like to redial
this phone number. To redial the last phone number
called, say“Yes”, otherwise say“No”.
NOTE:If there are no incoming calls stored on the
RECENT CALLSlist,BLUE&ME™will say “No re-
ceived calls” and the display will read “No call found”.
Incoming Calls
With the hands-free communication system you can
respond to incoming phone calls using the steering wheel
buttons. When a phone call is received, the system will
display information about the caller ’s identity, if avail-
able.
The incoming phone call can have a customized ring tone
(if this function is available on your mobile phone).
Answering a phone call
•
To answer the phone call, press the/MAINbutton
on the steering wheel.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Rejecting a phone call
•
To reject the phone call, press thePHONE HANG UP
button on the steering wheel.
Ignoring a phone call
•
To ignore the phone call and mute the phone call ring
tone, press the
/ESCbutton. Press the/ESC
again to hear the call or ring tone again.
38 BLUE&ME™ User’s Manual

TROUBLESHOOTING
Hands-Free Communication Package
General - display screen
Problem Probable Cause Possible Solution
Display screen shows:
NO PHONEBOOK
And the system saysTo
copy the phone book to
the system, go to the Set-
tings Menu, and select
USER DATA. To dial a
number, say Dial.For “pull” phones
•When the system asked “The data from
the phonebook will now be copied onto
the system. Continue?”, you responded
with “No”
•You have not downloaded your phone-
book via the SETTINGS menu
•The downloaded phonebook was de-
leted
For “push” phones
•You have not sent contacts to the sys-
tem using the ADD CONTACTS proce-
dure
•The downloaded phonebook was de-
letedFor “pull” phones
•Use the option PHONEBOOK in the
SETTINGS menu to download the
phonebook again
•Enter contact information in the phone-
book on your mobile phone and then
download the phonebook again – see
the section SETTING FUNCTIONS -
MANAGING USER DATA AND
PHONEBOOK For “push” phones
•Use the option ADD CONTACTS in the
SETTINGS menu to send contacts in
the phonebook on your mobile phone
to the system – see the section SET-
TING FUNCTIONS - MANAGING
USER DATA AND PHONEBOOK
1
BLUE&ME™ User’s Manual 83

Problem Probable Cause Possible Solution
•If you don’t press the
button be-
fore pronouncing a voice command, the
system will not activate voice recogni-
tion and therefore will not recognize
your voice commands
•If you don’t press the
/MAINbut-
ton to enter the Main Menu, it will not
be possible to manually access the
BLUE&ME™menu
•If after pressing the
/MAINbutton,
you don’t take action within approxi-
mately eight seconds, the system will
not respond to your key press
The mobile phone
prompts you to enter a
PIN number, but no
phone pairing proce-
dure was running•After you delete the pairing-related user
information on your mobile phone or
on the system, theBluetoothpairing
relationship between your mobile phone
andBLUE&ME™will no longer work•
Select option DELETE USERS on the system
and delete all users; then, pair the phone
again – see the section SETTING FUNCTIONS
- MANAGING USER DATA AND PHONE-
BOOK and also the section SETTING FUNC-
TIONS - PAIRING YOUR MOBILE PHONE
88 BLUE&ME™ User’s Manual

•If FIAT Auto S.p.A. provides or makes available to
you Supplemental Components and no other EULA
terms are provided along with the Supplemental
Components, then the terms of this EULA shall
apply.
•If FIAT Auto S.p.A.’s Software Suppliers, their affili-
ates and/or their designated agent make available
Supplemental Components, and no other EULA
terms are provided, then the terms of this EULA
shall apply, except that the FIAT Auto S.p.A.’s
Software Suppliers or affiliate entity providing the
Supplemental Component(s) shall be the licensor of
the Supplemental Component(s).
•FIAT Auto S.p.A., FIAT Auto S.p.A.’s Software
Suppliers, their affiliates and/or their designated
agent reserve the right to discontinue any Internet-
based services provided to you or made available to
you through the use of the SOFTWARE.
•Links to Third Party Sites. The SOFTWARE may
provide you with the ability to link to third party
sites through the use of the SOFTWARE. The third
party sites are not under the control of FIAT Auto
S.p.A.’s Software Suppliers, their affiliates and/or
their designated agent. Neither FIAT Auto S.p.A.’s
Software Suppliers nor their affiliates nor their
designated agent are responsible for (i) the contents
of any third party sites, any links contained in third
party sites, or any changes or updates to third party
sites, or (ii) webcasting or any other form of trans-
mission received from any third party sites. If the
SOFTWARE provides links to third party sites, those
links are provided to you only as a convenience, and
the inclusion of any link does not imply an endorse-
ment of the third party site by FIAT Auto S.p.A.’s
Software Suppliers, their affiliates and/or their des-
ignated agent.
1
BLUE&ME™ User’s Manual 105

UPGRADES AND RECOVERY MEDIA

If the SOFTWARE is provided by FIAT Auto S.p.A.
separate from the DEVICE on media such as a ROM
chip, CD ROM disk(s) or via web download or other
means, and is labeled “For Upgrade Purposes Only”
you may install one (1) copy of such SOFTWARE onto
the DEVICE as a replacement copy for the existing
SOFTWARE, and use it in accordance with this EULA,
including any additional EULA terms accompanying
the upgrade SOFTWARE.
INTELLECTUAL PROPERTY RIGHTS
All title and intellectual property rights in and to the
SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and
“applets,” incorporated into the SOFTWARE), the accom-
panying printed materials, and any copies of the SOFT-
WARE, are owned by FIAT Auto S.p.A.’s Software Sup-
pliers, their affiliates or suppliers. The SOFTWARE islicensed, not sold. You may not copy the printed materi-
als accompanying the SOFTWARE. All title and intellec-
tual property rights in and to the content which may be
accessed through use of the SOFTWARE is the property
of the respective content owner and may be protected by
applicable copyright or other intellectual property laws
and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this
EULA are reserved by FIAT Auto S.p.A.’s Software
Suppliers, their affiliates and suppliers. Use of any on-
line services which may be accessed through the SOFT-
WARE may be governed by the respective terms of use
relating to such services. If this SOFTWARE contains
documentation that is provided only in electronic form,
you may print one copy of such electronic
documentation.
EXPORT RESTRICTIONS
You acknowledge that the SOFTWARE is subject to U.S.
and European Union export jurisdiction. You agree to
106 BLUE&ME™ User’s Manual