2012 Citroen DS4 headlamp

Practical information
Model with xenon and directional
headlamps
1.Directional dipped/main beam
headlamps
(D1S-35W).2. Direction indicators (PY21W amber).3.Daytime running lamps (P21/5W XL).4.Sidelamps (LEDs).5.Foglamps (H11- 55W).
Model with halogen headlamps
1.Direction indicators (H21 clear).2.Dipped beam headlamps (H7-55W).
3.Main beam headlamps (H1- 55W).4. Daytime running lamps (P21/5W XL).5.Sidelamps (LEDs).6.Foglamps (H11- 55W).


Access to bulbs

Depending on the engine and only on the left
hand side, you must first carry out the following operations for access to the protective covers on the bulbs.) Remove the air deflector by unclipping each of its three attachment points.)
Unclip the bonnet release cable at its two
fixings. ) Move the cable down.
After changing the failed bulb, remember to
put everything back in place (cable and air
de
flector).

Front lamps

Changing dipped beam headlamp
bulbs (only on models with
halogen headlamps)
)Remove the protective cover by pulling on
the tab. )Disconnect the bulb connector. )Spread the springs to release the bulb.)Extract the bulb and change it.
To reassemble, carry out these operations in
r
everse order.
Changing direction indicator
bulbs
When refitting, close the protectivecover carefully to preser ve the sealing
of the headlamp.


Amber coloured bulbs, such as thedirection indicators, must be replacedwith bulbs of identical specificationsand colour.

Rapid flashing of the direction indicator warning lamp (right or left) indicates thefailure of a bulb on that side.
Model with Xenon headlamps)
Remove the protective cover by pulling on
its tongue. ) Disconnect the electrical connector. )
Separate the springs to release the bulb.)
Pull the bulb out and replace it.
To r e a s s e m b l e , c a r ry out these operations in reverse order.Model with halogen headlamps)Turn the bulb holder a quarter of a turn and extract it. )Pull out the bulb and change it.
To reassemble, carry out these operations inreverse order.

Practical information
Changing daytime running lamp bulbs
) Remove the protective cover by pulling on
the tab.) Disconnect the bulb connector. )
Turn the bulb holder a quar ter of a turn and extract it.)
Pull the bulb and change it.
To reassemble, carry out these operations in
reverse order.

Changing main beam headlamp
bulbs (only on models with
halogen headlamps)
)Remove the protective cover by pulling on
the tab. )Disconnect the bulb connector. )Squeeze the springs to release the bulb. )Pull out the bulb and replace it.
To reassemble, carry out these operations in
reverse order.

Changing integrated directionindicator side repeaters
)
Insert a screwdriver towards the centre of
the repeater between the repeater and the
base of the mirror. ) Tilt the screwdriver to extract the repeater and remove it. )
Disconnect the repeater connector.
To reassemble, carry out these operations in
r
everse order.
Contact a CITROËN dealer or a qualified
workshop to obtain replacement repeaters.

Fuse N°RatingFunctions
F1
930 A
Windscreen wipers slow/fast speed.
F20 15 A
Front and rear screenwash
pump.
F2120 A Headlamp wash pump.
F2215 A
Horn.
F2
315 A
Right-hand main beam headlamp.
F2
415 A
Left-hand main beam headlamp.
F275 A
Left-hand dipped headlamp.
F2
85 A Right-hand dipped headlamp.
Fuse table

Energy economy mode System which manages the period of use of cer tain functions to conser ve a sufficient level of charge in the battery.
After the engine has stopped, you can still use functions such as the audio equipment, windscreen
wipers, dipped beam headlamps, courtesy lamps, etc. for a maximum combined period of thirty
minutes.
This period may be greatly reduced if the battery is not fully charged.
A flat battery prevents the engine from
starting (refer to the corresponding paragraph).
If the telephone is being used at the same time on the navigation system, it will be interrupted after 10 minutes.


Switching to economy mode

Once this period has elapsed, a message
appears in the screen indicating that the vehiclehas switched to economy mode and the activefunctions are put on standby.

Exiting economy mode

These functions are reactivated automaticallythe next time the vehicle is driven. )In order to resume the use of these functions immediately, star t the engine and
let it run for a few minutes.
The time available to you will then be double
the period for which the engine is left running. However, this period will always be between
five and thir ty minutes.








Load reduction mode System which manages the use of certainfunctions according to the level of chargeremaining in the battery.
When the vehicle is being driven, the load
reduction function temporarily deactivates cer tain functions, such as the air conditioning,
th
e heated rear screen...
The deactivated functions are reactivated automatically as soon as conditions permit.

339
10
1
2
3a
3b
1
2
3
4
CONFIGURATION
Press SETUP
to display the"Confi guration " menu.
Select " Adjust luminosity" and confi rm
to adjust the screen brightness.
Pr
ess "OK" to save the changes.
The settin
gs for day and night areindependent.
Select " Choose colour" and confi rm torselect the screen colour harmony and
the map presentation mode:
-
day mode,
- n
ight mode,
- automatic day
/night mode,
according to whether the headlamps are on.





















SETTING THE DATE AND TIME

Select "Set date and time
" and confi rm.

Select the settin
g to adjust.

Confi rm by pressing OK, then adjust
the setting and confi rm again to save
the modifi cation.
Select " Display confi guration" andconfi rm.
Press SETUPto display the
" Confi guration" menu.

Select "Display confi guration
" andconfi rm.

Adjust the settings one by one.
Th
en select " OK
" on the screen and confi rm to save the settings.


DISPLAY CONFIGURATION
Select " Synchronize the minutes with GPS" so that setting theminutes is done automatically by satellite reception.

08SCREEN MENU MAP






Personalisation-
configuration
Defi ne the vehicle parameters
Access to the vehicle
Plip action
Driving position setting
Unlocking boot only
Driving assistance
Parking brake automatic
Rear wipe in reverse gear
S
peeds memorised
Vehicle lighting
Directional headlamps
Daytime lights
Interior lighting
Follow-me-home headlamps
Welcome li
ghting


Choice of language

Displa
y confi guration
Choice of unit
s
Date and time adjustment
Display parameters
Brightness

Choice of sounds


Bluetooth connection
Connections management
Search for a device

1
2
3
3
3
2
3
3
3
2
3
3
2
3
3
1
1
2
2
2
2
1
1
1

Exterior
- opening/closing
- antitheft protection
- starting
- battery


Lighting controls 124-128
Headlamp adjustment 130
Guide-me home lighting 127, 128
Welcome lighting 129
Directional lighting systems 131-132
Changing bulbs 258 -262


- front lamps

- front foglamps

- side repeaters Wiper controls
13 3-137
Changing
a wiper blade 275

D
oor mirrors 95-96
Blind spot sensors 218 -220

Doors
112-113


- opening/closing

- emergency control
Child lock 171
Electric windows 115-11 6
Alarm 109-111
Fuel tank 117-11 9
Misfuel prevention 119-120
Accessories
281-282
Roof bars 276

Brakin
g assistance 178-179
Tr ajectory control 179 -180
Tyre under-infl at i o n d ete c t i o n 176 -17 7
Tyre pressures 250, 291 B
oot 114
Te m p o r a ry puncture repair kit 246-250
Changing a wheel 251-257
- tools- removing/refitting


Chan
ging bulbs 263 -265
- rear lamps
- 3rd brake lamp
- number plate lamp
Parking sensors 228 -229
Parking space sensors 226 -227
To w b a r 2 7 9 - 2 8 0
Towing 277-278