2012 Citroen DS4 wheel

41Monitoring
)Press thumb wheel B for access to the main menu and select one of the following
functions:
- "Vehicle parameters",
- "Displa
y adjustment",
- "Choice of sounds". )Turn the thumb wheel B
to move around in
the instrument panel central screen.)Press the thumb wheel Bagain to confirm
the selection.Thi
s menu is used to activate or deactivate certain driving and comfor t systems, classified in different categories:
- "Access to the vehicle" (see "Access" section):


●
"Plip action" (Selective unlocking of the
driver's door),

●
"Unlocking only boot" (Selectiveunlocking of the boot).

- "Driving assistance":


●
"Parking brake automatic" (Automaticelectric parking brake; see "Driving" section),

●
"Rear wipe in reverse gear" (Rear wiper coupled to reverse gear; see "Visibility"section),

●
"Speeds memorised" (Memorising speeds; see "Driving" section).


- "Vehicle li
ghting" (see "Visibility" section):
●
"Directional headlamps" (Main/additional
directional lighting),
●
"Daytime lights" (Daytime runninglamps).


- "Interior lighting" (see "Visibility" section):
●
"Follow-me-home " (Automatic timed
operation of headlamps),
●
"Welcome lighting" (Interior/exterior
welcome lighting).


Vehicle parameters
Main menu
The main menu and its associated functions can only be accessed when
stationary.A message appears in the instrumentpanel central screen, above a certainspeed threshold, indicating that the main menu cannot be displayed.

Monitoring
Power steeringfixed. The power steering has a fault. Drive carefully at reduced speed.
Have it checked by a CITROËN dealer or a qualified
workshop.
Under-inflatedtyrefixed. The pressure in one or more wheels
is too low.Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when
the tyres are cold.
Directional headlampsflashing. The directional headlamps system
has a fault.Have it checked by a CITROËN dealer or a qualified workshop.
Warning lampis onCauseAction/Observations
Foot on the brakepedalfixed. The brake pedal is not pressed. With the 6 -speed electronic gearbox system, press
the brake pedal to star t the engine (lever in position N).
If you wish to release the parking brake withoutpressing the brake pedal, this warning lamp willremain on.
flashing. With the 6-speed electronic gearbox
system, if you hold the vehicle on an
incline using the accelerator for too long, the clutch overheats.Use the brake pedal and
/or the electric parking brake.
Airbags

temporarily. This lamp comes on for a fewseconds when you turn on the
ignition, then goes off. This lamp should
go off when the engine is started.
If it does not go off, contact a CITROËN dealer or a qualified workshop.

fix
ed. One of the airbag or seat belt pretensioner systems has a fault. Have it checked by a CITROËN dealer or a qualified
workshop.

59Monitoring
Lighting dimmer
Permits manual adjustment of the brightness of
the instruments and controls in relation to theexterior brightness. Only operates when the
vehicle lighting is on in night mode.
Activation
) Press button A
to change the brightness of
the instruments and controls.) When the lighting reaches the minimum setting, release the button, then press
again to increase it. or )
When the lighting reaches the maximum setting, release the button, then press
again to reduce it.) When the lighting reaches the level of brightness required, release the button.
This indicator and the li
ghting
value appear in the middle o
f theinstrument panel during adjustment
to show the lighting level compared to
the 16 levels available. You can also modi
fy the level of lighting by
turning the thumb wheel B , located on the leftof the steering wheel: )
upwards; to reduce the level, )
downwards; to increase the level.


Deactivation

When the vehicle lighting is off, or in day mode (daytime running lamps on), pressing the buttonor turning the thumb wheel does not have anyeffect.

61Monitoring
Customising the polyphonic
sounds
This menu allows you to choose a family of polyphonic sounds from the four available.
These sounds are grouped together in a familyand are adapted to suit the situation and context (alert, confirmation, rejection, direction
indicators, lighting left on, key in ignition...).

For the type 2 customisablecolour instrument
)
Press the thumb wheel for access to the main menu.)
Select the "Choice of sounds" line and confirm.
)
Select the desired family of sounds and confirm. )
Save the modifications by confirming "OK".

For safety reasons, the driver mustonly carry out these operation when stationary.

For safety reasons, these operations are only possible when stationary.
For the type 1 customisable colour instrument panel
)
Press the "MENU"button for access to the
main menu. ) Select the "Personalisation-configuration"
menu and confirm.
) Select the "Choice of sounds" line andconfirm.)
Select the desired family of sounds and confirm.)
Save the modifications by confirming "OK".

Type 2 central instrument panel screen
Information displays


- Display of instantaneous information with:
●
the ran
ge,
●
the current fuel consumption,
●

Stop & Start time counter,


- Display of trip "1"
with:
●
the distance travelled,
●
the average fuel consumption,
●
the average speed,
for the first trip.



- Displa
y of trip "2"
with:
●
the distance travelled,
●
the average fuel consumption,
●
the average speed, for the second trip.



●
information on the current audio source,

●
black screen,

●
navi
gation-guidance messages.
)Press the button, located at the end of the
wiper stalkor )turn the thumb wheel, located on the left of
the steering wheel
,
to display the following information in turn:
●
reminder of the speed,
●
instantaneous information
,●
trip "1" ,
●
trip "2",

73Multifunction screens

Tr ip zero reset
)When the required trip is displayed, press
th
e thumb wheel located on the left of the
steering wheel
or the button on the end of
the wiper stalk
for more than two seconds.
Trips "1"
and "2"are independent but their use
is identical.
For example, trip "1"
can be used for daily figures and trip "2"
for monthly figures.

stowed position (down).
They can also be removed.
To remove a head restraint:)release the backrest using control 1,)tilt the backrest 2 slightly forwards, )pull the head restraint upwards to the stop, )then, press the lug A
.
Rear head restraints

Never drive with the head restraints removed; they must be in place and correctly adjusted.









Steering wheel adjustment
)When stationary, pull the control lever toyrelease the adjustment mechanism.)
Adjust the height and reach to suit your
driving position.) Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these operations should only be carried outwhile the vehicle is stationary.

Deactivate the interior volumetric and anti-tilt
monitoring to avoid unwanted triggering of thealarm in certain cases such as:
- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your vehicle,
- changing a wheel,
- havin
g your vehicle towed,
- transpor t by sea.
Locking the vehicle
with exterior
perimeter
monitoring only

Deactivation of the interior volumetric and anti-tiltmonitoring
)
Switch off the ignition. )
Within ten seconds, press the button until
the indicator lamp is on continuously. ) Get out of the vehicle. )
Press the locking button on the remotecontrol immediately.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button flashes once per second.
To be effective, this deactivation must be carried out each time the ignition isswitched off.


Reactivation of the interior volumetric and anti-tilt monitoring
)Press the unlocking button on the remotecontrol to deactivate the exterior perimeter monitoring.)Press the locking button on the remote control to activate all the monitoringfunctions.
The indicator lamp in the button again flashes
once per second.