2012 CITROEN C6 DAG audio

7.37
1
2
2
1
2
1
2
2
2
3
3
4
4
4
3
2
2
2
3
4
4
4
3
3
3
3
4
4
4
4
1
2
2
1
2
2
2
1
1
1
3
3
3
3
3
3
3
3
2
Display short cuts version 8.2
CONFIGURATION
DISPLAY CONFIGURATION

choose colour


adjust brightness


set date and time
select units
SOUND
*

The parameters vary according to vehicle.
voice commands setting
speech synthesis setting

guidance instructions volume

other message volume

select female/male voice


activate/deactivate auxiliary source

VIDEO

VEHICLE DIAGNOSTICS
SELECT LANGUAGE
DEFINE VEHICLE PARAMETERS
*


ACTIVATE VIDEO MODE

VIDEO PARAMETERS
display formats
adjust brightness
set colours
set contrasts



ALERT LOG


STATUS OF FUNCTIONS *


RESET TYRE PRESS. DETEC. SYS. *



BLUETOOTH FUNCTIONS


activation mode
deactivated
activated and visible
activated and not visible


list of paired peripheral equipment


change the name of the audio/telephone


authentication code
phone book synchronisation mode

no synchronisation

view telephone phone book

view SIM card phone book

view all phone books

ACTIVATING/DEACTIVATING THE SEPARATE LH-RH CONTROL
SWITCHING THE AIR CONDITIONING ON/OFF
AIR CONDITIONING
Press the MENU button for more than 2 seconds to access thefollowing fl ow chart.
VOICE COMMANDS LIST

Press the Music button severaltimes in succession to access the following settings.
AUTO VOLUME CORRECTION

Each audio source (Radio, CD, MP3,Jukebox, CD changer) has its own separate settings.
AUDIO/TELEPHONE DIAGNOSTICS
GPS COVERAGE
UNIT BACKUP POWER
UNIT DESCRIPTION
NAVIGATION DEMONSTRATION
SERVICES CONFIGURATION
LOUDNESS CORRECTION TREBLEBASS MUSICAL AMBIENCE
FR - RR BALANCE LH - RH BALANCE

7.38
sound quality between the different audio sources (radio, CD,CD changer...).
Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the musical ambience "None"and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD,CD changer...).
The CD is ejectedautomatically or is notplayed by the player.

The CD is protected by an anti-pirating protectionsystem which is not recognised by the audio equipment.
The CD is inserted upside down, is unplayable, does not contain any audiodata or contains an audio format which the player cannot play.
The CD player sound is poor.
Insert good quality CDs and store them insuitable conditions.
The CD used is scratched or of poor quality.

The audio equipment settings (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selectingan ambience.
The table below groups together the answers to the most frequently asked questions.
QUESTION SOLUTION
RESPONSE

FREQUENTLY ASKED QUESTIONS


- Check that the CD is inserted in the player the right way up.

- Check the condition of the CD: the CD cannot be played if it is too damaged.

- Check the content in the case of a recordedCD: consult the advice in the Audio section.

-The audio equipment's CD player does not play DVDs.

- Due to inadequate quality, certain recordedCDs will not be played by the audio system.

- The CD changer does not play MP3 CDs.

7.39
SOLUTION RESPONSE

The environment (hills, buildings, tunnels, basement car parks...) blockreception, including in RDS mode.

The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).
This phenomenon is normal and does notindicate a failure of the audio equipment.

Have the aerial checked by a CITROËN dealer.
Sound cut-outs of 1 to 2 seconds in radiomode.

During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station.
Deactivate the RDS function if the phenomenon is too frequent and always on the same route.

With the engine off,the audio equipment switches off after a fewminutes of use.

When the engine is switched off, the audio equipment operating timedepends on the battery charge.

The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
The stored stations do not function (nosound, 87.5 Mhz is displayed...)
.
An incorrect waveband is selected.
Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored.

Start the vehicle's engine to increase the battery charge.

The quality of reception of the radio station listened to gradually deteriorates or thestored stations do not function (nosound, 87.5 Mhz is displayed...).

The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
Activate the RDS function to enable the system to check whether there is a more powerfultransmitter in the geographical area.

7.40
QUESTION SOLUTIONRESPONSE
The TRAFFIC INFO box is ticked. However, certain traffi c jams along the route are notindicated in real time.
On starting, it is several minutes before the system begins to receive the traffi c information.Wait until the traffi c information is being receivedcorrectly (displaying of the traffi c information symbols on the map).

In certain countries, only major routes (motorways, ...) are listed for the traffi c information.
The time taken tocalculate a routesometimes seems longer than usual.
This phenomenon is normal. The system isdependent on the traffi c information available.

The performance of the system may slow down temporarily if a CD is being copied onto the Jukebox at the same time as a route is beingcalculated.
Wait until the CD has been copied or stop thecopying before starting the guidance function.
Does the emergency call function work without aSIM card ?

No, European regulations impose the presence of a SIM card in order tomake an emergency call. Insert a valid SIM card in the slot on the system.
My SIM card is not recognised.
The system accepts 3.3V SIM cards, the old 5V and 1.8V SIM cards are not recognised. Contact your telephone operator.
The altitude is notdisplayed. On starting, the initialisation of the GPS may take up to 3 minutes toreceive more than 4 satellites correctly.
Wait until the system has started up completely. Check that there is a GPS coverage of at least 4 satellites (long press on the MENU button, thenselect AUDIO/TELEPHONE DIAGNOSTICS,then GPS COVERAGE).

Depending on the geographical environment (tunnel, ...) or the weather, the conditions of reception of the GPS signal may vary.
This phenomenon is normal. The system isdependent on the conditions of reception of theGPS signal.

7.42
Audio system
CONTENTS
●
01 First steps p 7.43
●
02 General menu p 7.44
●
03 Audio p 7.45
●
04 Hands-free kit p 7.48
●
05 USB Player p 7.49
●
06 Bluetooth functions p 7.51
●
07 Control short-cuts p 7.53
●
08 Confi guration p 7.54
●
09 Screen menu map p 7.55
●
Frequently asked questions p 7.57

Your Audio system is coded in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact a CITROËN dealer for confi guration of y
the system.

For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary.
When the engine is switched off and to prevent discharging of the battery, your Audio system may switch off after a few minutes.

7.43
11
223344
55
6677
1010
111
1212131314141515
88
99
01 FIRST STEPS
1. On/Off and volume adjustment.
2. Selection of the display on the screen from the modes:AUDIO, trip computer (TRIP), air conditioning (CLIM) and hands-free kit (TEL). The TEL button is not active if the hands-free kit option is not fi tted.
3. Selection of the source: radio, CD and CD changer.
4. Displaying of the general menu.
5. Cancellation of the current operation/return to the previous screen.
6. Confi rmation.
7. Automatic search for a lower/higher frequency. Selection of previous/next CD or MP3 track.


8. TA (Traffi c Announcement) function on/off.Long press: access to the PTY(radio Programme TYpes) mode.


9. Displaying of the list of local stations, of the tracks on the CD or of the MP3 directories.


10. CD eject.


11 . Buttons 1 to 6: Selection of a stored radio station. Selection of a CD in the CD changer. Long press: storing of a station.


12. Selection of the FM1, FM2, FMast and AM wavebands.


13. Selection of a lower/higher radio frequency. Selection of the previous/next CD. Selection of the previous/next MP3 directory.
14. Setting the audio options: front/rear balance, left/rightbalance, loudness, sound ambiences.
15. The DARK button changes the screen display for greater driving comfort at night.1st press: lighting of the upper banner only.2nd press: black screen display.3rd press: return to the standard display.

7.44
02GENERAL MENU
AUDIO FUNCTION:radio, CD, options.
TRIP COMPUTER: distance entering,warnings, status of functions.

TELEPHONE:hands-free kit, pairing, management of a communication.

PERSONALISAT ION-CONFIGURATION:vehicle parameters, display, languages.


> COLOUR DISPLAY C
AIR CONDITIONING:on/off and dual zone control(according to equipment).


For a detailed overall view of the menusavailable, refer to the "Display fl ow charts" part of this Audio system section.

7.45
11
22
33
44
22
44
33
11
03AUDIO
Press the SOURCE button several times in succession and select theradio.

Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.

Briefl y press one of the buttons to carry out an automatic search of the radio stations.

Press one of the buttons to carry out a manual search of the radio stations.

Press the LIST REFRESH button todisplay the list of stations receivedlocally (30 stations maximum).
To update this list, press for more than two seconds.



Select ACTIVATE FREQUENCY FOLLOWING (RDS) then press OK. RDS appears on the display.


Select the FM WAVEBANDPREFERENCES function thenpress OK.
Select AUDIO FUNCTIONS then press OK.

Press the MENU button.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)

The external environment (hills, buildings, tunnels, basement car parks) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does notindicate any failure of the audio equipment.
RDS
The RDS, if displayed, enables you to continue listening to the samestation by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assuredthroughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station duringa journey.


RADIO


SELECTING A STATION