2012 Citroen C4 PICASSO RHD ESP

II
51
MULTIFUNCTION SCREENS

SETUP menu




)
Press the "SETUP"
button to
open the confi guration menu.
This allows you to select from
the following functions:


- "System language",

- "Date and time",

- "Display",

- "Vehicle",

- "Units",

- "System".



System language
This menu allows you to select
the language used by the dis-
play: Deutsch, English, Espanol,
Français, Italiano, Nederlands,
Polski, Portugues, Türkçe * .

*
According to country.
Date and time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio and Telematics" section.

Display
This menu allows you to set the
brightness of the screen, the screen
colour scheme and the colour of the
map (day/night or auto mode).

Vehicle
This menu allows you to activate or
deactivate certain driving and comfort
equipment:


- wiper linked with reverse gear
(refer to the "Visibility" section),

- guide-me-home lighting (refer to
the "Visibility" section),

- directional headlamp lighting (refer
to the "Visibility" section),

- interior mood lighting (refer to
the "Visibility" section),

- electric parking brake automatic
functions (automatic application/
release) * ,

- selective door locking,

- daytime running lamps (refer to
the "Visibility" section).

Units
This menu allows you to select the
units: temperature (°C or °F) and
consumption (km/l, l/100 or mpg).

System
This menu allows you to restore the
factory confi guration, display the soft-
ware version and activate scrolling
text.

III
58
COMFORT
MANUAL AIR CONDITIONING
The air conditioning system operates
with the engine running.
A. DRIVER'S CONTROL PANEL


1. Adjustment of the air fan
speed
The air fan adjustment only operates
when the engine is running.
To adjust the air fl ow, press button 1
:
to increase the fl ow of air,
to decrease the fl ow of air. The level of air fl ow is shown by the
progressive lighting of the warning
lamps depicting the fan blades 1
.
By reducing the fl ow to minimum,
you deactivate the air conditioning
system (OFF).
To maintain an acceptable level of
comfort in the passenger compart-
ment, you should not leave this con-
trol too long in the OFF position.


2. Adjustment of air
distribution


)
Press button 2
to make the dis-
play run through the different
types of air distribution.
The air distribution chosen
is shown by the lighting of
the corresponding warning
lamps on the display 2
.


3. Mode of adjustment
of temperature for the
passenger


)
Press button 3
to have indepen-
dent passenger control of cabin
air temperature. The warning
lamp goes off.
While the passenger is adjusting tem-
perature, the warning lamp comes on.


4. Air recirculation

This control is for isolating disagree-
able odours or fumes coming from
outside.


)
Press button 4
to cut off the intake
of outside air and to activate recir-
culation of the air in the passenger
compartment. The warning lamp
comes on.
Avoid the extended use of air re-
circulation (risk of deterioration
of air quality and misting).

)
Press button 4
again to allow the
intake of exterior air. The warning
lamp goes off.



5. Air conditioning

The air fan control (adjusting the fl ow
of air) has to be activated in order for
air conditioning to be obtained.


)
Press button 5
. The warning
lamp comes on.
To be effective,
the air condi-
tioning should be operated only

with the windows closed.
If your vehicle is not equipped with
air conditioning, you will have the
same control panel but without the
A/C
button.

III
61
COMFORT

3. Adjustment of air fan
speed/Activation of the
"REST" function
to increase the air fl ow,
to decrease the air fl ow (this
button also has the REST
function).
The level of air fl ow is indicated on
the display by the progressive fi lling
of the fan blades.
If you place the air fan on position 0
,
the system is deactivated. The air
fan display will be empty, with the in-
dication OFF.
To allow a degree of comfort
in the passenger compart-
ment while the engine is off,
you can operate the ven-
tilation for a few minutes using the
"REST" function.
When you leave the vehicle, any
passengers present can still have
the benefi t of air circulation, even
though the engine is not running.
This function is available when
you switch on the ignition as well
as when you stop the engine.

The air conditioning control screens
come on and the symbol represent-
ing the air fan is displayed while the
function is available. This button does not activate the
air conditioning, only the air fans.
While the REST function is active,
the air fl ow and distribution cannot
be modifi ed.


On switching on the ignition:


- A press on the REST button ac-
tivates the function for a period
of a few minutes. Two blades of
the fan will fi ll to indicate that the
function is active.

- The function can be deactivated
and reactivated during the timed
period.

- At the end of the timed period,
the screen will go off.


4. Adjustment of air
distribution


)
Press button 4
to scroll
through the air distribution
settings on the screen.
Adjustment of air fl ow
To adjust the fl ow of air, press the
button:

"REST" function: activation of
ventilation, engine off
On switching off the engine:


- The function can be activated
during a period of 30 seconds.

- A press on the REST button ac-
tivates the function for period of
several minutes. The duration
and availability of the function
depends on the state of charge
of the battery. Locking the vehi-
cle has no effect on the function.

- A further press before the end of
the period of operation stops the
function defi nitively. The air distribution you have chosen
is confi rmed by the corresponding
indicators in the screen.
There are 7 possible adjustments.

III
68
COMFORT
FRONT SEATS

1. Adjustment of the
seat height and angle,
forwards-backwards
2. Adjustment of backrest
angle and lumbar support
The seats can also be adjusted elec-
trically for a short period:


- on opening one of the front
doors,

- after switching off the ignition.










Heated seats control
ELECTRIC ADJUSTMENTS

Raise or lower the front of
control to raise or lower the
front of the seat base (on
driver’s seat).
Raise or lower the rear of
control to raise or lower the
seat.
Action control forwards or
backwards to slide the seat
forwards/backwards. Push the top of control
forwards or backwards to
adjust the backrest angle.
Raise or lower control to
increase or decrease the
lumbar support.

With the engine running, the front
seats can be heated individually.


)
Use the corresponding adjust-
ment wheel, placed on the inner
side of each front seat, to switch
on and select the level of heating
required:

0
: Off.

1
: Low.

2
: Medium.

3
: High.

III
69
COMFORT











Storing driving positions

System which registers the electrical
settings of the driver's seat and door
mirrors. It enables you to store and
recall two positions using the but-
tons on the side of the driver's seat.
Storing a position

Using buttons M/1/2


)
Switch on the ignition.

)
Adjust your seat and the door
mirrors.

)
Press button M
, then press but-
ton 1
or 2
within four seconds.
An audible signal indicates that
the position has been stored.
Storing a new position cancels the
previous position.
Recalling a stored position

Ignition on or engine running


)
Press button 1
or 2
to recall the
corresponding position.
An audible signal indicates the end
of the adjustment.
You can interrupt the current move-
ment by pressing button M
, 1
or 2
or
by using one of the seat controls.
A stored position cannot be recalled
while driving.
Recalling stored positions is deacti-
vated 45 seconds after switching off
the ignition.

III
76
COMFORT




MIRRORS

Door mirrors

Each mirror is adjustable to provide
the rear view needed for overtaking
or parking. They can also be folded
for parking in confi ned spaces.

Adjustment
With the ignition on:


)
move control A
to the right or to
the left to select the correspond-
ing mirror,

)
move control B
in one of four di-
rections to adjust,

)
return control A
to the central
position. The objects observed are, in reality,
closer than they appear.
Take this into account in order to
correctly judge the distance of ve-
hicles approaching from behind.


Folding


)
From outside: lock the vehicle
using the remote control or the
key.

)
From inside: with the ignition on,
pull the control A
in the central
position rearwards.
If the mirrors are folded using con-
trol A
, they will not unfold when the
vehicle is unlocked. Pull again on
control A
.

Unfolding


)
From outside: unlock the vehicle
using the remote control or the
key.

)
From inside: with the ignition on,
pull the control A
in the central
position rearwards.
The folding and unfolding of the door
mirrors using the remote control can
be deactivated by a CITROËN dealer
or a qualifi ed workshop.
Never fold or unfold the electric
folding mirrors manually.







Automatic tilting in reverse gear
System which provides a view of the
ground during parking manoeuvres
in reverse gear.

Programming


)
With the engine running, engage
reverse gear.

)
Select and adjust the left-hand
and right-hand mirrors in suc-
cession.
The adjustment is stored immedi-
ately.


Switching off


)

Exit reverse gear and wait ten seconds.

or


)
Return control A
to the central
position.
The mirror glass returns to its initial
position.
The mirror glass also returns to its
initial position:


-
if the speed exceeds 6 mph (10 km/h),


- if the engine is switched off.


Switching on


)
With the engine running, engage
reverse gear.

)
Move control A
to the right or to
the left to select the correspond-
ing mirror.
The glass of the mirror selected tilts
downwards, in accordance with its
programming. The demisting/defrosting of the door
mirrors is linked to that of the rear
screen.

IV
80
ACCESS

Deadlocking using the key


)
Turn the key to the right in the
driver's door lock to lock the
vehicle completely and hold it
in this position for more than
two seconds to close the win-
dows automatically in addition to
locking.

)
Turn the key to the right again
within fi ve seconds to deadlock
the vehicle.
Deadlocking renders the exterior and
interior door controls inoperative.
It also deactivates the manual central
control button.
Therefore, never leave anyone in-
side the vehicle when it is dead-
locked. Deadlocking also triggers the timed
illumination of the exterior side spot
lamps and guide-me-home lighting,
if this is activated.

)
First press this button to fold the
key.
If you do not press the button when
folding the key, there is a risk of
damage to the mechanism.








Locating your vehicle

This function allows you to identify
your vehicle from a distance, espe-
cially when the light is poor. Your ve-
hicle must be locked.


)
Press the closed padlock on the
remote control.
This will bring on the courtesy lamps
and exterior side spotlamps, as well
as fl ashing the direction indicators
for a few seconds.


Remote operation of lighting











Anti-theft protection


Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the
ignition is switched on, this code
must be recognised in order for
starting to be possible.
This electronic engine immobiliser
locks the engine management sys-
tem a few minutes after the ignition
is switched off and prevents starting
of the engine by anyone who does
not have the key.
In the event of a fault,
you are informed by il-
lumination of this warn-
ing lamp, an audible
signal and a message in the screen.
In this case, your vehicle will not
start; contact a CITROËN dealer as
soon as possible.
Keep safely the label attached to the
keys given to you on acquisition of
the vehicle.


Folding the key
A press on this button
brings on the temporary
illumination of sidelamps,
dipped beam headlamps,
number plate lamps and
the exterior side spotlamps located
underneath the door mirrors.
A second press before the end of the
timed period cancels the command.
Deadlocking is confi rmed by fi xed
lighting of the direction indicators for
approximately two seconds.
According to version, the door mir-
rors fold at the same time.

V
94
VISIBILITY
EXTERIOR LIGHTING
CONTROLS
Control stalk for the selection and con-
trol of the various front and rear lamps
providing the vehicle's lighting.

Main lighting

The various front and rear lamps of
the vehicle are designed to adapt
the driver's visibility progressively in
relation to the climatic conditions:


- sidelamps, to be seen,

- dipped beam headlamps to see
without dazzling other drivers,

- main beam headlamps to see
clearly when the road is clear.



Additional lighting

Other lamps are fi tted to fulfi l the require-
ments of particular driving conditions:


- a rear foglamp to be seen from a
distance,

- front foglamps for even better
forward vision,

- directional headlamps for improved
visibility when cornering,

- daytime running lamps to be
seen during the day.



Programming

Various automatic lighting control
modes are also available depending
on options:


- guide-me-home lighting,

-
automatic illumination of headlamps,


- directional lighting.



Manual controls

Lamps off.





Automatic illumination of head-
lamps.
Sidelamps.
Dipped headlamps or
main beam headlamps.

B.
Stalk for switching headlamps:
pull the stalk towards you to switch
the lighting between dipped and
main beam headlamps.
In the lamps off and sidelamps
modes, the driver can switch on the
main beam headlamps temporarily
("headlamp fl ash") by maintaining a
pull on the stalk.

Displays

Illumination of the corresponding in-
dicator lamp in the instrument panel
confi rms that the lighting selected
is on. The lighting is controlled directly by
the driver by means of the ring A

and the stalk B
.
A.
Main lighting mode selection
ring: turn it to position the symbol
required facing the mark.