Page 287 of 332
285
01 FIRST STEPS
Fast back / forwards. PTY
On / Off.
Pla
y the start of each track in the current folder.
Press and hold
(audible beep): play the start of each track in all folders.
Pr
evious / next track.
Successive presses: pla
y returns to the start of thecurrent track.
Select previous / next folder (or track).
Ad
just audio settings (BASS, TREBLE, ...).
Manual search u
p and down for a radio station / PTY.
Function settin
g mode (AF, REG, TP, SCV, ...). E
ject one or more CDs.
Press: select folder
(or track).
Search for TP traffi cinformation.
Select previous / next CD.
Pause / stop and restart pla
y.
Page 288 of 332

286
02 STEERING MOUNTED CONTROLS
SPEAK
Press this button to activate voice reco
gnition (" Listening
" is displayed).
Durin
g voice recognition, press this button briefl y to pause voice recognition.
Make a lon
g press on this button to end voice recognition.
Press this button briefl
y to activate voice recognition, even during a call.
Increase / reduce audio volume.
START CALL
Press this button to answer an incomin
g call.
If th
ere is a 2nd
incoming call, press to put
the 1 stcall on hold and speak to the 2tndcaller.
In this case, press brie
fl y to switch from one caller to the other.
To start a three-way conversation, press
SPEAK to change to voice recognitionmode and say " Incorporate the call
".
END
CALL
Press this button to re
ject an incoming call.
During a conversation, press this button to end a call.
Search for a higher / lower radio frequency.
Next /
previous CD track.
CD fast forwards / backwards.
Lon
g press: audio system on / off.
Short press: selection of the source in thefollowing order: FM1 / FM2 / FM3 / MW /
LW / CD.
Page 289 of 332

287
1
1
1
11
03GENERAL OPERATION
Press the "PWR" button.
Th
e last source selected beforeswitching off resumes operation.
The audio equipment functions can be
used when the ignition switch is in the "ON" or "ACC" position.
To switch o
ff, press the "PWR" button
again.
ADJU
STING THE VOLUME
SETTING THE AUDIO MODES
Press the "
SOUND" button several
times; the audio modes change in the following order:
SUB PUNCH / TYPE / FIELD /
BASS / MID / TREBLE / FADER /
BALANCE / OFF.
Turn the "V
OL" dial respectively to the
left to decrease the volume or to theright to increase it. To access the personalised sound
functions quickl
y, press and hold
this button, then turn it to reach the
personalised sound setting of your choice.
Release the button to store thesetting. QUICK ACCESS MODE SWITCHING ON / OFF
The audio settin
g mode is deactivated when the radio is operated or a CD is played or after approximately 10 seconds without anyaction.I
f you press this button for more than2 seconds in the audio setting mode,
the system switches to "Hold" mode.
The audio mode selected will be
retained until you press this button again for more than 2 seconds. "HOLD" MODE
Page 299 of 332
297
05
1
MUSIC MEDIA PLAYERS
This can play audio CDs (CD-DA, CD-Text, CD-R/RW) or MP3 CDs.
EJECTING A DISC
CD PLAYER
SELECTING CD MODE
I
f the player already contains a disc,
press the "CD" button.
"
CD", the track number and the playing
time appear in the screen.
Insert circular compact discs onl
y.
8 cm compact discs must be inserted in the centre of the pla
yer slot.
After inserting a disc, printed face upwards, the player starts
automatically.
Pr
ess this button to remove the
disc from the player. The system
automatically switches to radio mode.
Once ejected, if the compact disc is not removed within fi fteen seconds, it is reloaded into the player.
Page 300 of 332
298
05
11
1
1
1
MUSIC MEDIA PLAYERS
Random playing of a disc
Pr
ess the "RDM" button to startrandom play of the tracks on the disc."RDM" appears in the screen.
To exit this mode, press this button
again.
AUDIO CD
Press and hold button " " or " " to carry out a fast backwards or forwards search respectively.
Pla
y begins when the button is
released.
Fast search
Press button " " or " " to select theprevious or next track respectively.
Selectin
g a track
Press the "RPT" button to repeat
the play of the current track. "RPT"appears in the screen.
To exit this mode, press this button
again.
Repeatin
g a track Pla
ying the beginning of each track
Press the "
SCAN" button to start playback of the fi rst ten secondsof each track on the disc. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode,
press this button
again.
On CD-R/RWs, the quality of the playback sound depends on theencoding software, the burning device and the burning speed used.
Page 305 of 332
303
05
11
1
1
1
MUSIC MEDIA PLAYERS
Repeating a disc
Pr
ess the "RPT" button for more than
two seconds to repeat the playing of
the tracks of the current disc. "D-RPT"
appears in the screen.
To exit this mode,
press this button
again.
AUDIO CD
Press and hold button " " or " " to carry out a fast backwards or forwards search respectively.
Pla
y begins when the button is
released.
Fast search
Press button " " or " " to select
the previous track or next track
respectively.
Selectin
g a track
Press the "RPT" button to repeat the
pla
ying of the current track. "RPT" appears in the screen.
To exit this mode, press this button
again.
Repeatin
g a track Random pla
ying of a disc
Pr
ess the "RDM" button to startrandom playing of the tracks on the disc. "RDM" appears in the screen.
To exit this mode, press this button
again.
Page 306 of 332

304
05
1
1
1
2
MUSIC MEDIA PLAYERS
Random playing on all of the discs
Pr
ess the "RDM" button for more than
two seconds to start random playing of
the tracks on all of the discs. "D-RDM"appears in the screen.
To exit this mode, press this button
again.
Pla
ying of the beginning of each track
Press the "
SCAN" button to start play of the fi rst ten seconds of each track
on the disc. "SCAN" appears in the screen and the corresponding track
number fl ashes.
To exit this mode, press this button
again.
On CD-R/RWs, the playback sound quality depends on the encoding software, the burning device and the burning speed used.
USING THE AUXILIARY SOCKET (AUX)
The auxiliary socket, JACK or RCA, permits the connection of portable
equipment (MP3 player...).
Do not connect a sin
gle piece of equipment via the USB port and
the JACK socket at the same time.
Connect the portable equipment
(MP3 player…) to the JACK socket or to the RCA-type audio sockets (white and red) using a suitable cable, not supplied.
Pr
ess the "CD" button for more than
two seconds.
"AUX" a
ppears in the screen and the external mode is activated.
Press "CD" a
gain to deactivate the
mode or on "AM/FM" to go to another
mode. JACK / RCA cable not su
pplied
Page 307 of 332

305
06
2
USB PLAYER
USING THE USB PORT
With the vehicle stationary, ignition switch in the LOCK
position, connect a
suitable cable to the portable player. The U
SB port is used to connect a portable device (MP3 player,Apple® player, ...). The fi les are sent from the player to your audio ®
system and heard through the vehicle's speakers.
Th
en connect the cable to the vehicle's USB port.Models supported:
- iP
od touch ®: FW version 1.1.1 or later.
- iP
od classic ® : FW version 1.0 or later. ®
- iPod 5 thgeneration ®: FW version 1.2.2 or later.
-
iPod nano 5th generation®
: FW version 1.2 or later.®
- iPod nano 2ndgeneration ®
: FW version 1.1.2 or later.®
- Compatible USB mass storage device: 256 Mb capacity or greater.
File
formats: MP3, WMA, AAC, WAV.
Maximum number of levels (including root): 8.
Number of folders: 7
00.
Number of fi les:
65 535.
Do not connect the portable device directl
y to the USB port, use acable.
To disconnect the cable, the i
gnition switch must be in the LOCKposition.
Navi
gation in the fi le base is done via the portable device / iPod ®.
Take care not to trap the cable when closing the armrest.