2012 Citroen C4 AIRCROSS audio

264
07
2
USB PLAYER





















USING THE USB PORT


With the vehicle stationary, ignition switch in the LOCK
position, connect a suitable cable to the portable player.
The USB port is used to connect a portable device
(MP3 player,Apple ®
player, ...). The fi les are sent from the player to your audio ®
system and heard through the vehicle's speakers.

Th
en connect the cable to the vehicle's
USB port. Models supported:
- iP
od touch® : FW version 1.1.1 or later. ®
- iPod classic ®: FW version 1.0 or later.
- iPod
5th generation®
: FW version 1.2.2 or later. ®
- iPod nano 5 thgeneration ®: FW version 1.2 or later.
- iP
od nano 2 nd
generation®
: FW version 1.1.2 or later. ®
- Compatible USB mass storage device: 256 Mb capacity or greater.
File
formats: MP3, WMA, AAC, WAV.
Maximum number of levels (including root): 8.
Number of folders: 700.
Number of fi les: 65 535.
Do not connect the portable device directly to the U
SB port, use a cable.
To disconnect the cable, the i
gnition switch must be in the LOCKposition.
Navigation in the fi le base is done via the portable device / iPod®.
Take care not to trap the cable when closing the armrest.

269
08








MATCHING A TELEPHONE, PLAYING A TRACK
Press on
Explanation
Results
Press the MODE button then Bluetooth Audio.
BLUETOOTH®
STREAMING - TELEPHONE®
Press on [Matching] to start matching.
Press on [New device] to detect a telephone.
Enter the PIN in the audio s
ystem.
Refer to the instructions for
your telephone to authorise the matching.
Enter the PIN in the telephone then a
fter a short time it appears in the list.
Select the telephone in the list, then choose [Hands free] for telephone and/or [Audio
Bluetooth] for streaming (an iPhone is recognised automatically).
Then con
fi rm with [Yes].

Once the telephone is matched, select a track then press [
] to play it.

271
09BLUETOOTH ® TELEPHONE ®
SPEAK
Press this button to activate voice recognition
(" Listening
" is displayed).
Durin
g a voice recognition, press this button briefl y to put this voice recognition on hold.
Make a lon
g press on this button to deactivate voice recognition.
Press this button briefl
y to activate voice recognition, even during a call.

Audio system on/off.

AN
SWER A CALL
Press this button to accept an incoming
call.
In th
e event of a 2 nd
incoming call, press
to put the 1stcall on hold and speak to thesecond caller.
In this case, press briefl
y to switch from one call to the other.

To establish a three-way conversation,press on SPEAK to change from voice
recognition and say " Incorporate the call
".
END
CALL
Press this button to re
ject an incoming call.
During a conversation, press this button to end the call.
In
crease the audio volume.

D
ecrease the audio volume.

275
09
1
3
6
8
2
5
7
4
BLUETOOTH® TELEPHONE®
For reasons of safety and because the sustained attention of the
driver is needed, operations of matching a Bluetooth ®mobile phone
with the audio system's hands-free function must be done with the vehicle stationary.

The systems says " Please say the 4 digits of a matching code".
Press this button.

The system confi rms the validity of the number spoken,answer "Ye s
".
Say " No" to return to step 7.
Say "Matching options
".


MATCHING A BLUETOOTH ®
TELEPHONE
FIRST CONNECTION
Say " Match a telephone ".
Say "Confi gure
". The system can register up to 7 Bluetooth
®compatible mobile
telephones.
The telephone which has the hi
ghest level of priority is connectedautomatically.

The s
ystem says "Do you wish to match a telephone, delete atelephone or obtain the list of matched telephones?
".
Sa
y a 4-digit number which will be recorded as the
matching code.

Remember this matching code as you must enter it in the telephone
in one of the following steps of the matching procedure.

276
10
09
9
11
12
13
14
15
16
17
Consult your mobile telephone's user manual and enter
the matching code recorded in step 7 in the telephone.
BLUETOOTH® TELEPHONE®
The system says " Start the matching procedure on the
telephone. Consult the instructions in the telephone manual ".
If the code is incorrect, the s
ystem locks. To clear the code:
- check that the telephone's voice reco
gnition is not activated,
- w
ith the ignition on and the audio system active, press the END CALL button for 2 seconds, 3 times in succession.
Wh
en it detects a Bluetooth ®compatible mobile telephone,
the system says " Please say the name of the telephone after
the beep".

After the audible signal, allocate a name to the telephone
by saying the name of your choice.The s
ystem says "Allocate an order of priority between 1 and 7.
One is the highest level of priority ".
Give a number between 1 and 7 to establish the level of
priority of the mobile telephone.
The system says and con
fi rms the " name of the telephone" andthe " number
" of its priority. r


Answer "Ye s"
Say " No" to return to step 13.
The systems says " Matching complete " then emits an audible signal and deactivates the voice recognition. The services available depend on the network, the
SIM card and the compatibility of the Bluetooth ®telephone used. Check in your telephone user
manual and with your service provider for the services you have access to.
I
f the system does not detect the Bluetooth® compatible mobile®
telephone, the matching process stops ands is accompanied by an audible signal.
If
you select a level of priority which has already been allocated toanother telephone, the system asks you if you wish to replace this
level of priority.

280
09
1
2
1
BLUETOOTH® TELEPHONE®

The telephone ring is sent to the speaker by the front passenger'sseat.
I
f an audio source (CD, radio, ...) is in operation when the call isreceived, it is placed on MUTE and only the incoming call is heard.
When the i
gnition switch is in the ACC or ON position, the audiosystem is activated automatically if an incoming call is received, even if it was originally off.

At the end o
f the call, the audio system returns to its previous state.

















REDIAL THE LAST NUMBER CALLED
Press this button.

Sa
y "Redial".
















RECEIVING A CALL


Press this button.

283
AUDIO-CD system


The system is protected in such a way that it will onlyoperate in your vehicle.

01 First steps - Control panel


For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is stationary.
When the en
gine is switched off and to prevent
discharging of the battery, the system switches off following the activation of the energy economy mode.



CONTENTS

02 Steering mounted controls

03 General operation

04 Radio

05 Music media players

06 USB player

07 BLUETOOTH
®
streaming

08 BLUETOOTH
®
telephone

Error messages p.
p.
p.
p.
p.
p.
p.
p.
p. 284
286
287
291
297
305
307
309
320

284
01 FIRST STEPS
Display the track.
Scroll through tracks. S
ymbols:
i: iPod® .
U: U
SB.
B: Bl
uetooth ®.
Random play in the currentfolder.
Press and hold
(audible
beep): random play in allfolders.
Loadin
g one or more CDs.

Switch audio mode:
->
CD ->
portable pla
yer (USB) / iPod ®

-> Bluetooth * ->
Repeat the current track.
Press and hold
(audible beep):
repeat all of the tracks in the current folder.

*

Available according to version.

Audio system on / off.
Select radio source.
Select waveband (FW, MW, LW).
Automatic presettin
g of radio stations (autostore).