Page 274 of 332

272
1
2
3
09
4
5
6
7
8
   
 
 
 
 
 
 
 
 
 
 
 
 
 
CHANGING THE VOICE COMMAND LANGUAGE 
BLUETOOTH® 
 TELEPHONE®
 
 
By default, the voice recognition system is in English.  
Pr
ess this button.   
Sa
y "Setup".
 
 Say "Language".
 
 Say the language of your choice in English, example: say" 
French 
" for French.
 
 
Say "Yes" to start the change of language process  
Say "No " to return to steps 4 to 7.  
The system says " 
Select a language: English, Spanish, French, 
German or Italian".  
The system then says " French selected. Is this correct? 
"  
The system repeats the language chosen and completes the 
change of language process.    
I
f you do not start the training procedure within around 3 minutes of pressing SPEAK, the process is cancelled.  
I
f you press SPEAK within 5 seconds following the play of a voice command, this command is saved again.  
 
 
 
 
 
 
 
 
 
 
 
 
 
What is the Bluetooth® 
 hands-free telephone with voice ®
recognition? 
  The s
ystem uses wireless communication technology known as Bluetooth® 
   
which allows you to make hands-free telephone calls in®
your vehicle via your Bluetooth ®compatible mobile telephone. 
 
You can make telephone calls using a microphone located in the courtesy lamp, making use of the simple steering mounted controlsor by the voice recognition function with voice commands. Five 
languages are available: English (the default), Spanish, French,German and Italian. 
         
        
        
     
        
        Page 275 of 332

273
09
2
3
1
4
5
6
7
BLUETOOTH®   TELEPHONE®
   
 
 
 
 
 
 
 
 
 
 
 
 
 
TRAINING THE USER'S VOICE 
You can use the user voice training function to create a voice model 
for one person per language.  
The characteristics o
f your voice and your pronunciation are savedin this model to provide the best voice recognition.  
The vehicle must be stationar
y with the parking brake applied.  
Switch off your telephone during the operation to avoid any 
interruption.  
   
Pr
ess this button.     
The s
ystem says the fi rst of 45 standard phrases.  
   
Sa
y " Word training".
When you are ready to start, press and hold this button.  
   
Repeat each o
f the phrases in the table on the following page.
The s
ystem saves your voice and moves on to the next command.  
Continue the process until all of the phrases have been
saved.  
   
An explanation messa
ge is given.     
After pla
ying all the voice commands, the system says "The word enrolment is complete" and ends the process.  
   
I
f you do not start the programming process within approximately 3 minutes after pressing the SPEAK button, the process is cancelled.  
I
f you press the SPEAK button within 5 seconds of the play of a 
voice command, this command is saved again.  
  
         
        
        
     
        
        Page 276 of 332
274
09BLUETOOTH®   TELEPHONE®
   
VOICE TRAINING COMMANDS 
 
1 # 790 (for # = "Hash") 
2* 671 (for * = "Star")
 3  212 - 4 903
 
4 235 - 3 494
  5 
315- 5 657
 
6 456 - 7 930
7793 - 5 462
 
8 794 - 1 826
  9 826 - 3 145
  1
0 962 - 7 305
11(531) 742 - 9 860
 
12 (632) 807 - 4 591
 
13 (800) 222 - 5 015
14(888) 555 - 1 212
  1
5 0 123 456 789
 
16  55 66 77 88 99
17 
44 33 22 11 00 
  1
8 Call 293 - 5804 
 
19 Call * 350
  20  Call 1 (234) 567 - 8 901
21 
Dial 639 - 1542 
22 
Dial # 780 
 
23  Dial (987) 654 - 3210 
  24  1058
# 3794# Send 
  2
5 
27643# 4321# Send 
  2
6 Cancel 
 
27 Continue
 28  Emergency number 
  29  
Clear all
 
30  Help
31  Home, Work, Mobile, Pager 
32  List of names 
33  No 
34  Phone book: Delete 
35  Phone book: New entry
36  Previous 
37  Phone book: Clear all 
38  Redial
39  Repeat the training 
4
0  Confi gure the confi rmation requests
41 
Confi gure the language
4
2  Confi gure the matching options
4
3  Match a telephone
44 
Transfer the call
4
5  Yes  
         
        
        
     
        
        Page 277 of 332

275
09
1
3
6
8
2
5
7
4
BLUETOOTH®   TELEPHONE®
For reasons of safety and because the sustained attention of the 
driver is needed, operations of matching a Bluetooth ®mobile phone 
with the audio system's hands-free function must be done with the vehicle stationary.
   
The systems says " Please say the 4 digits of a matching code".
Press this button.
   
The system confi rms the validity of the number spoken,answer "Ye s 
".
Say " No" to return to step 7.  
Say "Matching options 
".  
 
 
MATCHING A BLUETOOTH ®  
TELEPHONE  
FIRST CONNECTION 
   Say " Match a telephone ".
Say "Confi gure 
".   The system can register up to 7 Bluetooth 
®compatible mobile 
telephones.
The telephone which has the hi
ghest level of priority is connectedautomatically.
   
The s
ystem says "Do you wish to match a telephone, delete atelephone or obtain the list of matched telephones? 
".     
Sa
y a 4-digit number which will be recorded as the
matching code.  
   
Remember this matching code as you must enter it in the telephone
in one of the following steps of the matching procedure.   
         
        
        
     
        
        Page 278 of 332

276
10
09
9
11
12
13
14
15
16
17
Consult your mobile telephone's user manual and enter 
the matching code recorded in step 7 in the telephone.
BLUETOOTH®   TELEPHONE®
The system says "  Start the matching procedure on the
telephone. Consult the instructions in the telephone manual ".  
If the code is incorrect, the s
ystem locks. To clear the code:
-   check that the telephone's voice reco
gnition is not activated,
-  w
ith the ignition on and the audio system active, press the END CALL button for 2 seconds, 3 times in succession.
Wh
en it detects a Bluetooth ®compatible mobile telephone,
the system says " Please say the name of the telephone after 
the beep".
 
 After the audible signal, allocate a name to the telephone
by saying the name of your choice.The s
ystem says "Allocate an order of priority between 1 and 7. 
One is the highest level of priority  ".  
Give a number between 1 and 7 to establish the level of 
priority of the mobile telephone. 
The system says and con
fi rms the " name of the telephone" andthe " number 
" of its priority. r
 
 
Answer "Ye s"
Say " No" to return to step 13.  
The systems says " Matching complete " then emits an audible signal and deactivates the voice recognition.   The services available depend on the network, the 
SIM card and the compatibility of the Bluetooth ®telephone used. Check in your telephone user 
manual and with your service provider for the services you have access to.  
I
f the system does not detect the Bluetooth®   compatible mobile®
telephone, the matching process stops ands is accompanied by an audible signal. 
If 
you select a level of priority which has already been allocated toanother telephone, the system asks you if you wish to replace this
level of priority. 
         
        
        
     
        
        Page 279 of 332
277
09
2
3
1
4
5
BLUETOOTH®   TELEPHONE®
Say "Dial ".  
   
The system says "Number 
please 
".  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
USING A TELEPHONE NUMBER 
Call out the telephone number. 
Press this button.
The system asks you to confi rm this number, answer "Yes".
Say "No" to return to the previous step.    
Y
ou must have fi rst matched a BluetoothÆ compatible mobile 
telephone with the system.   
         
        
        
     
        
        Page 280 of 332

278
09
3
4
7
8
9
10
11
1
2
5
6
12
14
13
BLUETOOTH®   TELEPHONE®
The system has its own phone book, independent of that of the mobile telephone.
It can contain up to 32 names for each lan
guage. 
Each name in the 
phone book is associated with 4 locations: HOME, WORK, MOBILE and PAGER.  
The s
ystem says " Select one of the following items: New Entry,
Change, List of names, Delete or Clear all, or say Cancel toreturn to the main menu".
   
Say "New entry".
The system says "HOME, WORK, MOBILE OR PAGER".
Give the location which corresponds to the number thatyou wish to record.  
The s
ystem asks you to confi rm the location.  
 
 
Answer "Ye s".
Say " No" to return to step 7.
If a telephone number has alread
y been recorded for this location, the system says " The current number is -number-, number please".
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SAVING A NAME IN THE SYSTEM PHONE BOOK 
Press this button.
   
Sa
y "Phone book".
The system says " Name please 
".  
Give the name of your choice.
If 
you do not wish to change the telephone number, repeat the 
original number to retain it, otherwise say the new number. 
   
Answer "Ye s"
Say " No" to return to step 11.  
  The s
ystem asks you to confi rm the number.   
         
        
        
     
        
        Page 281 of 332
279
09
2
3
1
4
6
5
7
8
9
BLUETOOTH®   TELEPHONE®
Say "Call 
".  
   
The s
ystem says "Name please".
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
USING A NAME IN THE PHONE BOOK 
Give the name of the person that you wish to call. Pr
ess this button.   
Give the location corresponding to the number that you
wish to call.    
You must have fi rst matched a compatible Bluetooth®mobiletelephone with the system.  
   
If several telephone numbers have been recorded for this person,
t
he system says "Do you wish to call  {home}, {work}, {mobile} or {pager}?"
   
The system request confi rmation of the name.  
 
 
Answer " Ye s  
".  
Say "No 
" to return to step 4.  
   
The s
ystem says "Call to  at " and makes the call.