Page 36 of 140
34Comfort
Heating
1. Temperature adjustment
Turn the control from blue (cold) to red(hot) to adjust the temperature to suit your requirements.
2. Air fl ow adjustment
When the ignition is switched on, turn the control to obtain a flow of air which is sufficient
to ensure your comfort.
To maintain a certain level of comfort in thepassenger compar tment, avoid position 0whenever possible.
In position 0, a slight flow of air, due to themovement of the vehicle, can still be felt. Win
dscreen and side windows.
4. Rear screen demisting
With the engine running, press button 4
, the indicator lamp comes on.
The system demists the rear screen.
It is switched off b
y pressing control 4
.
3. Air distribution adjustment
Footwells, diffusion grille and side
vents.
Di
ffusion grille and side vents.
Demisting and defrosting
To quickly demist or defrost the windscreen and side windows:
- set the air distribution to "Windscreen and side windows",
- place the temperature control 1
and the air
fl
ow control 2at maximum,
- close the side vents.
The air distribution can be adjusted byplacing the control in an intermediate
position.
Switch the system off as soon as you consider this necessary as a lower consumption of current reduces fuel consumption.
Windscreen, side windows and
f
ootwells.
Footwells.
Page 37 of 140
3
35 Comfort
1. Air conditioning On/Off
With the engine running, press thebutton, the indicator lamp comes on.
1.
Air conditioning On/Off 2.Te m p e r a t u r e a djustment3.Air flow adjustment
Air conditioning
2. Temperature adjustment
Turn the control from blue (cold) to red(hot) to adjust the temperature to suit your
requirements.
4. Air recirculation / Air intake
5. Air distribution adjustment 6.
Rear screen demisting
3. Air fl ow adjustment
When the ignition is switched on, turn the control to obtain a flow of air which is sufficient
to ensure your comfort.
To maintain a certain level of comfort in the
passenger compartment, avoid position 0whenever possible.
In position 0
, a slight flow of air, due to the
movement of the vehicle, can still be felt. The air conditionin
g will not operate if the air flow adjustment control 3 is in position 0.
To quickly obtain cooled air, you can use air recirculation for a few moments. Then return to exterior air intake.
Page 42 of 140
40Fittings
Interior fi ttings
3-door5-door
1. Microphone for Bluetooth telephone2. Sun visor
Each sun visor has a cour tesy mirror
with a concealin
g flap and a card holder.3. Storage compar tments4. Storage box5. Front door pockets and speakers
Before opening the door, check that
there are no objects protruding from the
door pockets.
6. Cu
p holder
7. 12 volt accessories socket
(120 W max) This is supplied from the accessories position (1st
position of the ignitionswitch).8. Auxiliar y socket (JACK and USB) for por table equipment
9. Storage compartments in the rear doors
Page 46 of 140
OFF
44Visibility
Lighting control stalk
1.Lamps off
2
.Sidelamps
3. Dipped beam / Main beam
headlamps
Dipped beam / Main beam
headlam
ps
Dipped beam headlamps: pull the stalk.
Main beam headlamps:
push the stalk.
Lighting on audible warning
When the driver's door is opened with the
ignition off, a continuous audible signal is heard
if you have left your lighting on.
Headlamp flash
Pull the stalk fully towards you.
Selection is b
y rotation of ring A.
Front foglamps and rear
fo
glamp
)Turn the ring B forwards to turn it on. )Turn the ring B
rearwards to switch it off.
Vehicles fi tted with a rear
foglamp only (ring B)
In clear weather or in rain, both day andnight, the front foglamps and the rear foglamp are dazzling and their use is prohibited.
Do not forget to switch them off whenthey are no longer needed.
The rear foglamp only operates if the dipped beam / main beam headlampsare on.
Page 47 of 140
6
45 Visibility
LED daytime running lamps *
On starting the vehicle, the LED daytime running lamps come on automatically, if the lighting stalk is in the OFFposition.
If the sidelamps and headlamps are switched on manually or automatically, the LED lamps switch off.
Deactivation/activation
Vehicles fi tted with front
foglamps and a rear foglamp (ring C)
Turn the ring C
: )forwards a 1 st
time to switch on the front
foglamps, )forwards a 2nd time to switch on the rear foglamp, )rearwards a 1 sttime to switch off the rear foglamp, )rearwards a 2nd
time to switch of the frontfoglamps.
Direction indicators
Left:
stalk downwards. Right:
stalk upwards.
The front foglamps only operate if thesidelamps or dipped beam / main beamheadlamps are on. The rear foglamp only operates if the front foglamps are on.
In countries where exterior lighting by day is nota legal requirement, it is possible to deactivate
the function in the following way.
- Engine stopped, lighting off and parking brake applied, switch on the ignition (key in
the Running position (2nd notch)).
- Within a period of 5 seconds, turn the
lighting control stalk ring Afrom the OFF
position to the Sidelamps
position thenreturn to the OFF
position three times.
An audible signal con
firms the deactivation of
the daytime running lamps.
*
LED: li
ght-emitting diodes.
In countries where daytime running lamps are required by law, this "Daytimerunning lamps" function is alwaysactivated by default and must not dedeactivated.
To reactivate the daytime running lamps, repeat this procedure. An audible signal confirms the
reactivation of the daytime running lamps.
Page 49 of 140
6
47 Visibility
Windscreen wiper stalk
Windscreen wash
Pull the wipers stalk towards you.
Rear wiper and wash-wipe
Turn it for wards to trigger the wash
during wiping.
Rear wash
Turn it towards you to trigger a wash
operation. MIST Sin
gle wipe.
For a single wipe of the windscreen, push the control upwards then release it.
OFF
Off. INT
Intermittent wipe. LO Normal wipe (moderate rain).
HI Fast wipe (heavy rain).
In winter,
you are advised to wait until the
windscreen has been defrosted fully before
operating the windscreen wiper stalk.
When using a car wash, switch off the ignition and ensure that the wiper blade is in the low position. Turn rin
g A
to "ON"for a steady wipe. Ring A
at "OFF"(wiper off).
Windscreen wiper
Page 50 of 140
48Safety
Audible warning system to aler t other road
users to an imminent danger. )Press the central part of the steering
wheel. Press the button
, the direction indicators flash.
They can operate with the ignition off.
When the vehicle is being driven,illumination of this warning lamp indicates that the parking brake is still
on or has not been properly released.
Parking brake
Applying
Pull the parking brake to immobilise your
vehicle.
Releasing
Pull on the handle and press the button to
release the parking brake.
Horn
Hazard warning lamps
When parking on a slope, direct your wheels towards the pavement and
pull the parking brake on.
Use the horn moderately and only in the following circumstances:
- immediate danger, - approaching a location lacking visibility.
Page 53 of 140
7
51 Safety
Seat belts
3-door
5-door
Rear seat belts
The rear seats are equipped with two three-point inertia reel seat belts.
Yo u can store the seat belt buckles in the housing A.
Pull the strap, then inser t the buckle into thestalk.
Check that the seat belt is fastened correctly bypulling the strap.
To unfasten the seat belts, press the button on
th
e stalk.
Pretensioning front seat belts with force limiter
Safety in the event of front impactshas been improved by means of theintroduction of pretensioning seat beltswith force limiter for the front seats.Depending on the force of the impact, the pretensioning system instantly tightens the seat belts and pulls them against the body of the occupants.
The pretensioning seat belts are activewhen the ignition is on.
The force limiter reduces the pressure of the seat belt on the chest of the occupant, increasing their protection.
Fastening/Unfastening the seatbelts
