
Keyless Enter-N-Go (Passive Entry)
This feature allows you to lock and unlock the vehicle’s
door(s) without having to press the RKE transmitter lock
or unlock buttons. To make your selection, press and
release the SELECT button until a check-mark appears
next to the feature showing the system has been activated
or the check-mark is removed showing the system has
been deactivated. Refer to “Keyless Enter-N-Go” in
“Things To Know Before Starting Your Vehicle”.
Easy Exit Seat
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle. To make your selection, press and release the
SELECT button until a check-mark appears next to the
feature showing the system has been activated or the
check-mark is removed showing the system has been
deactivated.NOTE:
The seat will return to the memorized seat
location (if Recall Memory with Remote Key Unlock is set
to ON) when the RKE transmitter is used to unlock the
door. Refer to “Driver Memory Seat” in “Understanding
The Features Of Your Vehicle” for further information.
Tilt Mirror In Reverse
When this feature is selected and the vehicle is placed in
a reverse gear, the driver’s side mirror will tilt downward
to allow the driver to see into the previous blind spot and
avoid objects in close proximity to the rear of the vehicle.
To make your selection, press and release the SELECT
button until a check-mark appears next to the feature
showing the system has been activated or the check-mark
is removed showing the system has been deactivated.
Blind Spot Alert
There are three selections when operating Blind Spot
Alert (“Blind Spot Alert Lights”, “Blind Spot Alert
Lights/CHM”, “Blind Spot Alert Off”). The Blind Spot
326 UNDERSTANDING YOUR INSTRUMENT PANEL

Dual Video Screen
NOTE:Typically there are two different ways to operate
the features of the Video Entertainment System (VES)™.
•The Remote Control
•The Touch-Screen Radio (If Equipped)
Play A DVD Using The Touch-Screen Radio
1. Press the OPEN/CLOSE or LOAD hard-key on the
radio faceplate (Touch-Screen).
2. Insert the DVD with the label facing up. The radio
automatically selects the appropriate mode after the disc
is recognized and displays the menu screen or starts
playing the first track. 3. To watch a DVD on Screen 1 for second row passen-
gers, ensure the Remote Control and Headphone switch
is on Channel 1.
4. To watch a DVD on Screen 2 for third row passengers,
ensure the Remote Control and Headphone switch is on
Channel 2.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 365

Using The Remote Control
1. Press the MODE button on the Remote Control.
2. While looking at Screen 1 or 2, highlight DISC by
either pressing Up/Down/Left/Right buttons or by re-
peatedly pressing the MODE button, then press ENTER.NOTE:•Channel/Screen 1 select mode information is shown
on the left side of the screen.
•Channel/Screen 2 select mode information is shown
on the right side of the screen.
•The VES™ will retain the last setting when turned off.
Using The Touch-Screen Radio Controls
1. Press the MENU hard-key on the radio faceplate.
2. Touch the Rear VES soft-key to display the Rear VES
Controls. If a channel list is displayed, press the HIDE
LIST soft-key to display the Rear VES Controls screen.
Select DISC Mode On The VES Screen
366 UNDERSTANDING YOUR INSTRUMENT PANEL

3. Touch the 1 or 2 soft-key and then the DISC soft-key in
the VES column. To exit touch the back arrow soft-key at
the top left of the screen.NOTE:
•To view a DVD on the radio press the RADIO/MEDIA
hard-key, on the radio faceplate, then touch the DISC
tab soft-key and then the VIEW VIDEO soft-key.
•Viewing a DVD on the Touch-Screen radio screen is
not available in all states/provinces, and the vehicle
must be stopped, and the shift lever must be in the
PARK position for vehicles with automatic transmis-
sion. In vehicles with manual transmission the parking
brake must be engaged.
Listen To An Audio Source While A Video Is
Playing
Ensure the Remote Control and Headphone switch are on
the same channel. If watching a video on Screen 1
(second row), then Channel 2 could be used for audio. If
watching a video on Screen 2 (third row), then Channel 1
could be used for audio.
Select Channel/Screen 1 And DISC In The VES Column
370 UNDERSTANDING YOUR INSTRUMENT PANEL

Numeric Keypad Menu
When the display for either Channel 1 or Channel 2
shows DIRECT TUNE, pressing the remote control’s
ENTER button activates a numeric keypad menu. Thisscreen makes it easy to enter a specific tuner frequency,
satellite channel, or track number. To enter the desired
digit:
1. Press the remote control’s navigation buttons (,
,
, ) to navigate to the desired digit.
2. When the digit is highlighted, press the remote con-
trol’s ENTER button to select the digit. Repeat these steps
until all digits are entered.
3. To delete the last digit, navigate to the Del button and
press the remote control’s ENTER button.
4. After all of the digits are entered, navigate to the Go
button and press the remote control’s ENTER button.Station List Menu
When listening to Satellite audio, pressing the remote
control’s MENU button displays a list of all available
channels. Navigate this list using the remote control’s
navigation buttons (, ) to find the desired station,
Numeric Keypad Menu
384 UNDERSTANDING YOUR INSTRUMENT PANEL

CAUTION! (Continued)
•Shift into or out of REVERSE only after the
vehicle has come to a complete stop and the engine
is at idle speed.
•Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
idle speed.
•Before shifting into any gear, make sure your foot
is firmly on the brake pedal.
Using Fob With Integrated Key (Tip Start)
NOTE:Normal starting of either a cold or a warm
engine is obtained without pumping or pressing the
accelerator pedal.
Do not press the accelerator. Use the Fob with Integrated
Key to briefly turn the ignition switch to the START
position and release it as soon as the starter engages. The
starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine
fails to start, the starter will disengage automatically in
10 seconds. If this occurs, turn the ignition switch to the
LOCK position, wait 10 to 15 seconds, then repeat the
“Normal Starting” procedure.
Keyless Enter-N-Go – If Equipped
This feature allows the driver to oper-
ate the ignition switch with the push
of a button, as long as the ENGINE
START/STOP button is installed and
the Remote Keyless Entry (RKE) trans-
mitter is in the passenger compart-
ment.
Installing And Removing The ENGINE
START/STOP Button
Installing The Button
1. Remove the key fob from the ignition switch.
426 STARTING AND OPERATING

Radial Ply Tires......................... 473
Radiator Cap (Coolant Pressure Cap) .......570,573
Radio Operation ........................ 397
Radio Remote Controls .................... 395
Rear Air Conditioning .................403,414
Rear Camera ........................... 229
Rear Cross Path ......................... 127
Rear Heater ............................ 403
Rear Park Sense System ................... 220
Rear Window Defroster ................... 273
Rearview Mirrors ........................ 116
Reclining Front Seats ..................... 171
Recorder, Event Data ...................... 88
Recreational Towing ...................... 517
Reformulated Gasoline .................... 491
Reminder, Seat Belt ....................... 74
Remote Keyless Entry (RKE) ................. 20
Remote Sound System (Radio) Controls ........ 395
Remote Starting System .................... 30 Removable Floor Console
.................. 269
Replacement Keys ........................ 16
Replacement Parts ....................... 557
Replacement Tires ....................... 478
Reporting Safety Defects ................... 624
Resetting Oil Change Indicator .........292,293,313
Restraint, Head ......................... 172
Restraints, Child ....................... 89,93
Rocking Vehicle When Stuck ................ 544
Roof Rack (Luggage Rack) ................. 274
Rotation, Tires .......................... 481
Safety Checks Inside Vehicle ................ 105
Safety Checks Outside Vehicle ............... 107
Safety Defects, Reporting .................. 624
Safety Information, Tire ................... 460
Safety Tips ............................ 104
Safety, Exhaust Gas .................... 57,104
Satellite Radio Antenna ................... 349
10
INDEX 643

Weight............................ 509
Towing Assistance ....................... 143
Traction Control ......................... 452
Traction Control Switch ................... 452
Trailer Towing .......................... 503
Cooling System Tips .................. 516
Hitches ............................ 508
Minimum Requirements ................ 511
Trailer and Tongue Weight .............. 510
Wiring ............................ 514
Trailer Towing Guide ..................... 509
Trailer Weight .......................... 509
Transaxle Selection of Lubricant ................. 601
Transmission ........................... 577
Automatic ....................... 431,577
Fluid .......................... 578,601
Transmitter Battery Service
(Remote Keyless Entry) .................... 27 Transmitter, Garage Door Opener (HomeLink®) . . 236
Transmitter, Remote Keyless Entry (RKE)
........ 20
Transporting Pets ........................ 100
Tread Wear Indicators .................... 476
Trip Odometer .......................... 290
Turn Signals ................... 208,290,595,597
UCI Connector ......................... 352
Uconnect™ (Hands-Free Phone) ............. 129
Umbrella Holder ........................ 260
Uniform Tire Quality Grades ................ 627
Universal Consumer Interface (UCI) Connector . . . 352
Universal Transmitter ..................... 236
Unleaded Gasoline ....................... 491
Upholstery Care ........................ 582
Vanity Mirrors .......................... 120
Variance, Compass ....................... 319
Vehicle Certification Label ................. 501
10
INDEX 647