2012 AUDI R8 SPYDER tire pressure

202 Tire s and whee ls
- The tire pressure monitoring system
helps the driver to keep an eye on tire
pressures. But the driver st ill has the re­
spons ibility for maintaining the correct
tire pressure.
- Tire pressure must only be adjusted
when the temperature of the tires is
about the same as ambient air tempera­
ture.
- When t ires are replaced, the sensors and
valves should not be exchanged . The
valve core, nut, valve sealing and seal
washer (rep lacement kit) needs to be re­
placed. If necessary, the valve and the
whee l electronics have to be rep laced.
- The tire pressure monitoring system on
your Audi was calibrated us ing tires w ith
"RO" identification. We recommend us­
ing these tires.
- If you should put different whee ls and
ti res on yo ur vehicle (e.g. w inter wheels
and tires), yo u m ust be certain that the
whee ls and tires are compatible with the
tire pressure monitoring system . Other­
wise the system w ill reg ister a ma lfunc­
tion and a fault message will be d is­
played . For more information, contact
your authorized Audi dealer .
- For Declaration of Compliance to United
States FCC and Industry Canada regula­
tions
~ page 222 .
Programming a new set of tires
App lies to vehicles: with tire pressure monitoring system
When driving with a new set of ti res, you can
program them to the t ire pressure monitoring
system using the menu disp lay.
"' Turn the ign ition on.
"' Se lect the menu :
Set> Tir e pr essu re >
Wh eel cha ng e.
"' Co nfirm that you wou ld like to begin the
programming process. The message
Wh eel
s en sors a re being in it ia lised. Thi s ma y ta ke
a fe w minute s .. .
appears in the instrument
cluster disp lay. You can switch between programmed tire sets
at any time without reinitializing the system .
(D Tips
If the programming process was not com­
pleted successfully, the message
Wheel
s en sors could not be initi alis ed
appears in
the disp lay and the
IIQIS, indicator light
turns on. If this happens, repeat the pro­
cedure.

204 What do I do now?
Using TM S, tire damage caused by foreign
bodies up to about
0.16 inch (4 mm ) in diam­
eter can be sealed reliably.
The foreign object must s tay in the t ire.
The tir e sea lant mu st not be us ed :
- for cuts or punctures in the tire which are
larger than 0.16 inch (4 mm)¢ fig. 153
(D
- for damage to the rim@
- if you have been driving with very low tire
pressures or tires with no air @
Using the
TM S is described in the section
¢ page 204, Preliminary steps.
TMS can be used at temperatures down to
-4 °F (- 20 °C).
A WARNING
Take the following preca utions after re­
pairing the tire:
-
- Do not drive faster than 50 mph (80 km/
h)!
- Avoid full-throttle acce leration, heavy
braking an d fast cornering.
- The vehicle's road behavior can be affect­
ed.
- Tires sealed w ith
TMS are intended only
for
temporar y, short-term use . Dam­
aged tires must be replaced . Drive care­
fully to the next professional repair fa­
cility.
- After using the t ire sea lant the tire pres­
sure monitoring system may no longer
work properly. Drive carefully to the next professional repair fac ility.
- TMS must NOT be used,
- for cuts or pu nctures in the ti re whi ch
are larger than 0.16 inch (4 mm)
- for damage to the r im
- if you have been dr iv ing with very low
tire pressures or t ires with no air
- Seek profess ional assistance if it is not
poss ible to repair the tire with the tire
sealant.
- The tire sealant must not come into con­
tact with sk in, eyes or clothing. -
If you get any ti re sea lant in yo ur eyes or
come into contact w ith it, rinse the af­
fected area thoroughly with clean water. Find a phys ician immediately!
- Change any clothing contaminated with
tire sealant immediately.
- Do not inha le the vapor!
- If you have swallowed tire sealant, rinse
your mouth thoroughly right away and
drink plenty of water.
- Do not induce vomit ing! Find a physi­
c ian immediately!
- I f you have allergic react ions, find a
phys ic ian immediately.
- Keep the tire sealant away from children.
(D Note
Do not use commercially avai lab le tire
sealants. The e lectr ica l components of the
tire pressure monitoring system will no longe r work properly.
@) For the sake of the environment
Used sealant bottles ca n be dropped off at
a recycling facility.
(D Tips
- If sea lant has run out, allow it to dry.
Then you can peel it off.
- Have the t ire sea lant rep laced every 4
years at a dealership.
Preliminary steps
Some preliminary steps are necessary for tire
repair.
... If you have a flat tire, park the vehicle as far
as possible from moving traffic .
... App ly the
parking brake firmly.
... Engage a gear.
... Check whether a repair using the Tire Mobi­
lity System is poss ible ¢ page 203 .
... Have all passengers
lea ve the veh icle and
stay away from the danger zone¢.&_ .
... Take the
sea lant bottle and the ele ctri c air
pum p from the luggage compartment un-
de r the floor ¢ page 203, fig. 152. ....

.. Remove the "max. 50 mph" (80 km/h)
sticker from the sealant bottle and affix it to
the instrument cluster in the dr iver's view.
A WARNING
- Turn the hazard flashers on if you have a
flat tire in moving traffic. In this way you
protect yourself and other road users .
- Make sure that all passengers are in a
safe place, out of the dange r zone (fo r
example, behind a guard ra il).
(D Note
Part icular care is necessary if you are mak­
ing a t ire repair on a steep incline.
@ Tips
Obey all laws.
Making a tire repair
Tire repair consists of the following sections.
F ig. 154 Parts of the Tir e Mob ility System
Fig . 1 55 Con nector for the Ti re Mob ility System
l) The e lectr ic a ir pump s houl d never r un for long er than
8 m inute s.
What do I do now ? 205
Assembling Ti re Mobility System
.. Open the lid@ of the e lectr ic air p ump
<:!) fig. 154 .
.. Pull the plug @and the pressure hose ®
w ith the gauge out of the housing .
.. Screw the pressure hose ® of the electric
air pump onto the flange @ of the sealant
bott le @ .
.,. Push the sea lant bottle w ith the flange
down into the recess ® on the lid of the
electric a ir pump.
.. Remove the d ust cap from the va lve of the
defe ctive tire .
.. Screw the hose(§ onto the va lve
0
c::> fig. 155.
.. Insert the plug@¢ fig. 154 into the socket
for the c igarette lighte r.
Inf lating tire
.. Move the switch @ ¢ fig. 155 on the elec­
tric air pump
l} to position I. After 5 mi­
nutes, tire pressure m ust have reached at
least 1.8 bar .
.. Switch the e lectric air pump off -sw itch in
position
0 . If the required tire pressure of at
least 1.8 bar has not been reached, follow
th e instruct ions in the section
Re-inflating
tire .
Re-inflating tire
.. Remove the hose from the valve and pull
the plug out of the socket.
.. Dr ive the veh icle slowly 10 meters back­
ward o r fo rward . This helps to d istribute the
sealant bette r .
.. Remove the empty infla tion bot tle and
s crew the hose ®® ¢
fig. 154 from the
electric pump directly onto the va lve .
.. Insert the plug @ into the socket for the
cigarette lighter .
.. Move the switch @
c::> fig. 155 on the elec­
tr ic air pump
l} to position I. After 5 mi­
nutes, tire pressure must have reached at
least 1.8 bar.

206 What do I do now?
• Switch the electric air pump off -switch in
position
0. If the required tire pressure of at
l east 1.8 bar has not been reached, it is not
poss ible to make a repa ir with the tire seal­
ant. Seek professional ass istance.
Disassembling Tire Mobility System
• Remove the hose from the valve and pull
the p lug out of the socket .
• Screw the dust cap onto the valve.
• Place the empty sealant bottle back in the
original packaging and clip it in place under
the floor so that no tire sealant can run out into the vehicle .
• Start driving r ight away so that the sealant
is distributed in the tire.
.&_ WARNING
- Follow the manufactur er's safety instruc­
tions on the decal for the air pump and
the sea lant bott le .
- If a tire pressure of 1.8 bar cannot be
achieved after pumping for 5 minutes,
the tire is too severely damaged. Do not continue to drive.
- Seek professional assistance if it is not
possible to repair the tire with the tire
sealant.
(D Tips
- Do not operate the electric air pump for
more than 8 min utes without stopping,
otherwise it can overheat. When the air
pump has cooled down, you can continue
to use it.
- If sealant has escaped, allow it to dry,
then you can peel it off.
Final check
After driving for a short distance, t ire pressure
must be checked .
• After driving for about 10 minutes, stop
and check the t ire pressure .
• If tire pressure is still at least 1.3 bar, in­
flate the tire to specified p ressure (see driv­
er's side B-pillar), drive to the next repair shop and have the tire and the sealant
bot­
tle replaced.
• If tire pressure is less than 1.3 bar, the t ire
is too severely damaged. Do not continue to
drive. Seek professional assistance.
.&_ WARNING
If tire pressure is less than 1.3 bar after
driving for 10 minutes, the tire is too se­
ve rely damaged. Do not continue to drive.
Seek professional assistance.
(D Tips
After a tire repair, have the sealant bottle
replaced at a dealership. This restores full
functionality to the Tire Mobility System .
What should I be
aware of when
changing a tire?
Tires with unidirectional tread design
-
Tires with unidirectional tread design must be
mounted with their tread pattern pointed the
right direction.
A unidirectional tire can be identified by ar­
rows on the sidewall, which point in the direc­
tion of the rotation. You must follow the
specified direction of rotation. This is necessa­
ry in order for these tires to develop their op­
timum characteristics regarding grip, road
noise, wear, and hydroplaning .
· Anti-theft wheel bolts
A special adopter is needed to turn the anti­
theft wheel bolts.
Fig . 156 A nti-theft wheel bolts wit h adapte r

Tightening wheel bolts
~ Fit the wheel bolt wren ch over the wheel
bolt and push it down as far as it will go
1l.
~ Close your gr ip around the end of the
wrenc h handle fo r maximum torque and
turn each whee l bolt
clockwi se u nti l it sits
t ight.
H ave the
tightening torque of the whee l bolts
checked as soon as possible with a torque
wrench. It shou ld be 120 Nm.
Chec k the
tir e pre ssure as soon as possible .
Return the vehicle tool kit to its proper place .
A WARNING
Loosening the wheel bo lts is prohib ited;
da nger of an accident!
@ Tips
- Never try and use the hexagona l socke t
i n the handle of the screwdr iver to loos­
en or tighten the w heel bolts.
- If yo u have dete rm ined t hat wheel bolts
a re cor roded and difficult to t urn, the
bo lts must be rep laced befo re checking
the to rque.
- Unti l the tig hte ning torque is checked,
d rive at redu ced speeds as a precaution .
Notes on wheel change
Please read the information ¢ page 193, New
tires and replacing tires and wheels ,
if you are
going to use a spare t ire which is different
from the tires on you r veh icle.
Afte r you change a tire :
- Check the tire pressure on the spare imme­
diately after mounting.
- Have the wheel bolt t ightening torque
chec ked w ith a torq ue wrench as soon as
poss ib le by your author ized A udi dealer or a
qualified service sta tion .
1) You need t he appro pria te adapte r to t ig hte n th e an ti­
t h eft whee l bolt s
c:> page 206 .
What do I do now? 209
- With stee l and alloy wheel rims, the whee l
bolts are correctly tightened at a torque of
90 ft lb (120 Nm) .
- If you notice while changing a tire that the
wheel bo lts are corroded and difficu lt to
turn, then they shou ld be rep laced before
you check the tightening torque.
- Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible . Remount the wheel cover.
Until then , d riv e with e xtra care and at re­
duced speeds.
A WARNING
- If you are going to equ ip your vehicle
with tires or rims which differ from those
which were facto ry installed, then be
sure to read the information ¢
page 193,
New tires and replacing tir es and
wheels.
- Always sto re the tools secu rely in lug­
gage compartment. Othe rwise, in a n ac­
cident o r su dden maneuver they cou ld fly
forwdrd, CciU5ing injury to pd55enger5 in
the vehicle.
(D Note
Do not use comme rcially avai lab le tire
sea lants . Otherwise, the e le ctr ic al compo­
nen ts of t he tire p ressu re monitoring sys­
tem * wi ll no longe r work proper ly and the
sensor fo r the tire pressure mon itor ing
system will have to be rep laced by a quali­
fied workshop.
Jump-starting
General
If necessary, the engine can be started by
connecting it to the battery of another vehi­
cle.
If the engi ne should fail to start because of a
discharged or weak battery, the battery can be
II>
•
•

214 Fuses and bulbs
Fuse panel @
Consumer
Automatically dimming in-
side mirror, garage door
8 opener (Homel
ink), washer
pump relay, power outlets
relay
10
[ru button
11 Pressure sensor, climate
controls
12 Airbag
Fuse panel @
No . II Consumer
II
1 Radiator fan (1)
Radia
tor fan (2)
Exterior lighting
4 Exterior lighting
6 Blower regulator
Fuse panel@
No . II Consumer
II
1 Rear view camera
2
Tire pressure monitoring
system
4 Cell phone package, te
le-
phone antenna amplifier
5 Instrument cluster
6 Networking gateway
7 Steering column lever
8
Diagnostic interface, brake
pedal switch, selector lever
9 Rain/light sensor
10 Light switch
11 Special functions control
module
15 Sound amplifier
Radio
Fuse panel E
No. Consumer
3 Auxiliary water pump
5 Supply terminal 15, starter
Amps
10
10 5
5
Amps
40 40
40
40
40
Amps
5
10
7.5 5
5
5
10 5
5
5
30
20
Amps
10
30
Fuse panel @
No. Consumer
6 Pump for brake booster
7 Horn
8 Wiper motor
9 Wiper motor
10 Headlight washer system
12 Power outlets and cigarette
lighter
Fuse panel
®
No. !!Consumer
1 Electronic Stabi lity Control
2 Electronic Stability Control
4
5
6 Rear
window defogger
Power locking system
Interior lights, washer noz­
zles
Anti-theft alarm system
Climate controls
Heated seats
10 Lumbar support
11 Control module for doors
12 Control module for doors
Bulbs
Note
Amps
15
20
30
30
30
20
ll Amps ,
10
25
30
20
20
5
10
25
10
30
10
Your vehicle is equipped with maintenance­
free headlights and rear lights. However, if a
bulb has to be changed, please consult your
authorized Audi dealer or other qualified
workshop.

222 Consumer Information
malfunctions. Because of the way electronic
components are interconnected with each
other, such malfunctions can also have an ad­
verse affect on other systems that are not di­
rectly involved. This means that you risk both
a substantial reduction in the operational
safety of your vehicle and an increased wear of
vehicle parts~.&, .
Authorized Audi dealers will perform this
work in a professiona l and competent manner
or, in special cases, refer you to a professional
company that specializes in such mod ifica­
tions.
_& WARNING
Improper repairs and modifications can
change the way vehicle systems work and
cause damage to the vehicle and serious
personal injury .
(D Note
If emergency repairs must be performed
elsewhere, have the vehicle examined by
an authorized Audi dealership as soon as
possible.
-
Declaration of Compliance, Telecommu­
nication or Electronic Systems
Radio Frequency Devices and Radiocommuni­
cation Equipment User Manual Notice.
The manufacturer is not responsible for any
radio or TV interference caused by unauthor­
ized modifications to this equ ipment.
Devices
The following devices each comp ly with FCC
Part 15.19, FCC Part 15.21 and RSS-Gen Issue
1:
-Cell phone package
- El ectronic immob ilizer
- Homelink® universal remote control
- Remote control key
- Tire pressure monitoring system
FCC Part 15.19
T his device complies with part 15 of the FCC
Rules. Operation is subject to the fo llowing
two conditions :
(1) This device may not cause harmful inter­
ference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Part 15.21
CAUTION:
Changes or modifications not expressly ap­
proved by the party responsible for compli­
ance could vo id the user's authority to operate
the equipment.
RSS-Gen Issue 1
Operation is subject to the following two con­
ditions:
(1) this device may not cause interference,
and
(2) this device must accept any interfe rence ,
i ncl uding interference that may cause unde­
sired operation of the device .

224 Index
State of charge ............... .... . 147
Vehicles not driven for long periods . .. 178
Winter operation . . . . . . . . . . . . . 178, 179
Working on the battery . . . . . . . . . . . . . 179
Battery voltage . . . . . . . . . . . . . . . . . . . . . . 18
Before driving . . . . . . . . . . . . . . . . . . . . . . . 91
Blended gasoline .............. .... . 164
Booster seats ............. .. .. .... . 13 7
Brake system Anti -lock brake system ........ .. .... 16
Brake assist system ......... .. .. .. . 142
Brake fluid ....................... 178
Brake light defective ................ 18
Brake power assist unit ............. 145
Brakes ... .. ................ ..... . 145
Ceramic brakes ............ ... .... . 145
Malfunc tion .............. ... .... .. 13
Warning/indicator lights ....... .... .. 13
Worn brake pads symbol . . . . . . . . . . . . . 17
Break-in period .............. .. .... . 150
Bulbs ...... ........... ........ ... . 214
C
California Proposition 65 Warning ..... 169
Battery specific ............... .... 180
Capacities ... ................ ..... . 217
Carbon-fiber parts Exterior .. ................. .. .. .. . 157
I nter ior .. ................. .. .. .. . 159
Car care ... .. ................ ... ... 153
Cargo area
refer to L uggage compartment . . . . . . . . 96
Car key .. .... ............... .. .. .. .. 32
Catalytic converter ......... .. .. .. .. . 150
Certification ................. ..... . 222
Changing a flat tire .................. 206
Chassis
refer to Audi magnetic ride ..... .. .... 75
Checking Engine coolant level .......... ... .. . 176
Tire pressure ................. .... . 189
Child restraints
Danger of using child restraints in the
front seat . . . . . . . . . . . . . . . . . . . . . . . . 111
Where can I get additional information
about child restraints and their use? .. 141 Child safety
..... .. ............. .... 130
Convertible locking retractor ......... 138
Impo rtant safety instructions for using
child safety seats .............. .... 133
Important things to know when driving
with children .. .. ................ . 130
Child safety seats . . . . . . . . . . . . . . . . . . . 135
Booster seats .... ................. 137
Convertible child seats ............. 136
Convertible locking retractor ....... .. 138
How do I properly install a child safety
seat in my vehicle? ....... ...... .. .. 133
Infant seats ..... ................ . 135
Installing . ................... .... 138
Safety instructions ............. .. .. 133
Cigarette lighter . . . . . . . . . . . . . . . . . . . . . 62
Cleaning Alcantara (synthetic suede) ....... ... 161
Engine compartment ........... .... 162
Exhaust tail pipes . ............. .. .. 158
Fabrics and fabric coverings . .. ... ... 159
Leather .......................... 161
Matte finish paint ................. 155
Radio and navigation display ..... .. .. 158
Safety belts . .. .. ............. .. .. 162
Cleaning and protection ... ....... .. .. 153
Cleaning the navigation display .... .. .. 158
Cleaning the radio display ............ 158
Climate controls . .. ... .......... .... . 65
Dust filter . . . . . . . . . . . . . . . . . . . . . . . . . 6S
Heating .......... .... ........... .. 65
Pollen filter . . . . . . . . . . . . . . . . . . . . . . . 65
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . 65
Clock ............................... 9
Closing Engin e compartment lid . . . . . . . . . . . . 170
Clutch overheating .... ......... ... .. . 19
Cold tire inflation pressure ........ .. .. 187
coming home . .. .. ............... ... 49
Compass mirror ... ... ......... ... .. . 57
Compliance ..... .. ................. 222
Consumer Information . . . . . . . . . . . 97, 219
Contacting NHTSA . ... .......... .. ... 97
Controls and displays . . . . . . . . . . . . . . . . . . 6
Convertible child safety seats . .. ...... 136