2012 Acura TSX phone

M U L T I I N F O R M A T I O N D I S P L A Y ( M I D )
A c c e s s i n g t h e M I DM a i n D i s p l a y s
Consists of several displays that provide you with useful information.Main display
When you start the engine\b the MID shows
the last active lower display from the
previous drive cycle.
To toggle between the different
displays\b presseither Info button
(▲/▼) for the main displays and
press the SEL/RESET button for
the lower displays.SEL/RESET
button
INFO
buttons
5
4
Instant fuel economy
Average fuel economy
Range
Bluetooth®HandsFreeLink®(HFL)*
Tire pressure monitor
Average speed
Elapsed time
* if phone is paired; shown on Base model only
L o w e r D i s p l a y s
Oil lifeOdometer\b
Outside
temperature Trip A\b
Outside
temperature Trip B\b
Outside
temperature
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f25 PM Page 4

V O I C E R E C O G N I T I O N
F u n c t i o n s b y V o i c e C o m m a n d
To keep your eyes on the road and hands on the wheel\b use voice commands for
hands-free calling\b navigation\b audio\b climate control\b and AcuraLink functions. For a
full list of commands\b say“Info” and“Voice Help.”
Control up to five different systems with the steering wheel buttons and the
ceiling microphone.
1\f 11
Technology Package shown
15
14
B L U E T O O T H® H A N D S F R E E L I N K ®p. 25
A C U R A L I N K *p. 24
A U D I O *p. 19
C L I M A T E *p. 19
N A V I G A T I O N *p. 2\f
* Voice commands for these systems are available on Technology Package only.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f27 PM Page 9

U s i n g t h e V o i c e C o m m a n d S y s t e m
HFL Talk button:Give HFL
commands and answer
incoming calls.
HFL \fack button: Cancel a
command and end or decline
a call.
B a s e m o d e l
T e c h n o l o g y P a c k a g e
17
16
PickUp button:
Answer an
incoming call\b or go directly to the
Cellular Phone screen.
Talk button: Give HFL\b navigation\b
audio\b climate control\b or
AcuraLink commands.
\fack button: Cancel a command
and return to the previous screen.
HangUp button: End a call or
decline a call.
V o i c e C o m m a n d T i p s
• To hear a list of available commands at any time\b press and release the
Talk button\b then say“Help.”
• When using the Talk button\b wait for a beep\b then give a command.
• When the Talk button is pressed\b all available voice commands are
highlighted in blue.
• Speak in a clear\b natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
C o m m o n l y U s e d V o i c e C o m m a n d s
Press and release the Talk button before you give a command.
L o o k f o r R e s t a u r a n t s
N e a r Y o u r L o c a t i o n
Say a command like “Display
restaurants” to see restaurant icons
appear on the map.
A d j u s t V e h i c l e ’ s C l i m a t e
S e t t i n g
Say a command like “Air
conditioner on” and“Fan speed 4”
to achieve a comfortable climate
setting.
M a k e A u d i o S e l e c t i o n s
Say a command like “Radio 97.\f
FM” or“CD play track 5” to select
that station or song.
G e t E s t i m a t e d D i s t a n c e
t o D e s t i n a t i o n
After a destination is entered\b say
“How far to destination?” to hear
the remaining distance.
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f27 PM Page 10

A C U R A L I N K® M E S S A G E S( T e c h n o l o g y P a c k a g e )
Acura periodically sends you messages on vehicle features\b recall and safety
information\b maintenance reminders\b and diagnostic information.
B L \b E T O O T H® H A N D S F R E E L I N K ®( B a s e m o d e l )
Place and receive phone calls through your vehicle's audio system. Visit
www.acura.com/handsfreelink to check if your phone is compatible.
U s i n g H F L
HFL Talk button:Give HFL
commands and answer incoming
calls.
HFL \fack button: Cancel a
command and end or decline a
call.
25
24
Press and release the HFL Talk button before you give a command.
S c h e d u l i n g a D e a l e r A p p o i n t m e n t
1. When you receive a new
message\b an envelope icon
appears on the map screen.
2. Say “Messages,” and a list of
messages appears.
1. Using the Interface Dial\b open a maintenance or
product update
message.3. The system searches for the next available appointment at your registered dealer.
Select “Confirm Appointment” if you are
satisfied with the date.
NOTE: If you are not satisfied with the available
date, use the Call option to call your dealer directly.
2. Select “Schedule
Dealer Appt.”
4. Select “OK” to set the appointment.
To use this feature\b register at My Acura (www.myacura.com)\b and make sure
your compatible phone is paired (see page 27) and set up for data connection.
V i e w i n g N e w M e s s a g e s
3.Say the number of the
message you want to
hear.
Press and release the HFL Talk button before you give a command.
1. Enable “Discovery” or
“Search” mode on your
compatible phone
3. HFL gives you a four-digit code that also appears on
the MID.
2.Say “Phone setup,” then
say “Pair.” 4.
Search for HandsFreeLink from
your phone\b and enterthe
code when prompted.
Connect to HFL.
PAIR
0000
P a i r i n g Y o u r P h o n e
5. HFL asks you to name the
phone. For example\b say
“Mary's phone.” The phone is
now paired.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f29 PM Page 14

M a k i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. Say “Call” and the phone
number.
2. Say “Call” or“Dial” to
begin the call. 3. The call is connected and
heard through the
speakers.
B L \b E T O O T H®H A N D S F R E E L I N K®( T e c h n o l o g y P a c k a g e )
Place and receive phone calls through your vehicle's navigation and audio systems.
Visitwww.acura.com/handsfreelink to check if your phone is compatible.
27
26
01233456789IN USE
CALLINGP a i r i n g Y o u r P h o n e
Press and release the Talk button before you give a command.
2. Make sure your phone is in Discovery mode. Searchfor
HandsFreeLink from your
phone\b and selectit when it
appears. 3. When your phone prompts
you\b enter the 4-digit pass-
key from HFL.
4. Follow your phone’s prompts
and connect to HFL.
Use this pairing method when no phone has ever been paired to the system.
You can only pair your Bluetooth-compatible phone when the vehicle is
stopped.
U s i n g H F L
PickUp button: Answer an
incoming call\b or go directly to the
Cellular Phone screen.
Talk button: Give HFL commands.
\fack button: Cancel a command
and return to the previous screen.
HangUp button: End a call or
decline a call.
1. Press the Pick-Up button to
access the Cellular Phone
screen. A prompt appears
asking if you want to add a
phone. Say“Yes.”
R e c e i v i n g a C a l l
1. A notification is heard\b and
“INCOMING CALL” and the
phone number appear on
the MID.
2. Press the HFL Talk button to
accept the call.3. Press the HFL Back button
to decline or end the call.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f29 PM Page 15

29
28
P a i r i n g Y o u r P h o n e ( c o n t i n u e d )
Press and release the Talk button before you give a command.
3. Say “Setup Bluetooth
phone .”
2.
Say “Phone setup.”
6. When your phone prompts
you\b enter the 4-digit pass-
key from HFL.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
If a prompt appears asking if
you want to connect to a
phone\b say“No” and continue
to step 2.
4. Say “Pair phone.”
7.Follow your phone’s
prompts and connectto
HFL.
Use this pairing method when a phone has already been paired to the
system\b or when you want to pair an additional phone.
5. Make sure your phone is inDiscovery mode. Searchfor
HandsFreeLink from your
phone\b and selectit when it
appears.
M a k i n g a C a l l
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Dial.”
3.Say the entire phone
number.
4. Say “Dial” to begin the call.
D i a l i n g a N u m b e r
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Phonebook.”
HFL imports your phonebook
if it is not already imported.
3. Say the number of the
entry you want to call.
* Visit www.acura.com/handsfreelink to check if this feature is available on your phone.
U s i n g t h e I m p o r t e d P h o n e b o o k *
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f29 PM Page 1\b

31
3\f
B L \b E T O O T H®
A U D I O
Play audio files from your compatible phone through your vehicle’s audio system. Visit
www.acura.com/handsfreelink to check if this feature is available on your phone.
1. Make sure your phone is on and paired to HandsFreeLink (see
page 2\b or 27).
Notes:
• Make sure the volume on your phone is properly adjusted.
• You may need to enable additional Bluetooth settings on your phone for playback. 4.
Press () or () on the audio
control panel to change tracks\b
or press (+) or () on the remote
audio controls.
2. Press AUX until “Bluetooth Audio”
appears.
3. From your phone\b openthe
desired audio player or app and
begin playing. Sound is
redirected to the audio system.
P l a y i n gBluet\f\fthA u d i o F i l e s
* not supported on all phones
R e c e i v i n g a C a l l
1. When you receive an incoming call\b you hear a notification and see one of the following pop-up messages:
3.Press the Hang-Up button
to end or decline the call.2. Press the Pick-Up button to
accept the call.
On the audio screen
On the navigation
map screen
On the Cellular
Phone screen
Press and release the Talk button before you give a command.
U s i n g S p e e d D i a l a n d V o i c e T a g s
Note: See your Owner’s Manual for instructions on storing speed
dial entries and accompanying voice tags. 3. The call is connected and
heard through the
speakers.
2.Say “Call” and the number of
the entry. For example\b “Call
one.” For the complete list of
speed dial entries\b say“More
speed dial.” If a speed dial has a stored
voice tag\b say“Call” and
the voice tag name. For
example\b “Call Mary.”
1.
Press the Pick-Up button to
access the Cellular Phone
screen.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f31 PM Page 17